Delta®
Tapón de desagüe - Baño en Venetian Bronze
N.º de modelo: RP5648RB
Image Thumbnail, click to view zoomed product image 
CARACTERÍSTICAS DEL PRODUCTO
This pop-up style drain stopper works with most lift rod type drain systems.
- Multiple finishes available.
- Dual loop to accommodate various depth drain assemblies.
- May be installed removable or non-removable.
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
5
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 5 out of
5
by
Anonymous from
sink stopper delivered
the right part with the delivery on time and it works just like the original.
Date published: 2024-04-08
Rated 5 out of
5
by
Will from
Just What I Needed
The part was packaged very well from Delta and arrived quickly. The stopper looked great and fit in my drain after a little filing down. Very happy with my purchase!
Date published: 2024-04-06
Rated 5 out of
5
by
nrowe from
mrowr
It was exactly as I had imagined and installed as well. Very glad to find the part I needed . Thanks for the good service.
Date published: 2011-08-27
Rated 3 out of
5
by
loeyd from
True Delta Part??
I found this same generic part at the local hardware store for less after shipping, but didn't get it because I was looking for a true Delta part that said "Delta" on it (so it would match the other sink). I kept it, put it in a bathroom with a single sink, and moved the matching Delta one to the 2-sink bathroom. It looks fine, just was looking for a real match.
Date published: 2011-04-16
Rated 5 out of
5
by
Grizzly from
Worked great/saved $
Went to several stores trying to replace this part and was told I needed to replace the entire assembly!!! All generic replacement parts didn't fit. This part wasn't expensive and fit perfectly. Thanks.
Date published: 2010-05-03
Rated 5 out of
5
by
WhoCares1 from
Install With Your Eyes Closed
Looks great and could not be easier to install and maintain.
Date published: 2009-12-09
Rated 5 out of
5
by
faucetfixer from
Simple and elegant
Consistent quality and simply constructed...
Date published: 2009-07-25
Preguntas y respuestas
I have a stopper that has a stopper cap (the part plugging up the drain) that is only 1.25" in diameter. The four flanges that go down into the drain must be smaller than usual, because I've picked up a couple of universal-sized kits and they're toogbih
Hello Robin,
Thank you for your inquiry! The Delta Stopper assembly RP5648PT is designed to work with the RP23060PT flange.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP23060PT
Best regards,
Tanya
Date published: 2024-03-28
I need to order this stopper as i have double sinks but lost one, my current one says delta in the middle, the one pictured doesn't is that correct?
Hi Becca, Thank you for your question. You are correct that the RP5648 stopper does not have "Delta" on the stopper. Unfortunately none of our current drain assemblies or stoppers have Delta on them.
Thanks,
Dave
Date published: 2024-03-28
Is the washer/gasket on the Delta Drain Stopper replaceable or must one purchase the entire stopper?
Thank you for your question, Gene! At this time there is not a separate part number for the washer/gasket on Delta Faucet model #RP5648. The entire stopper will need to be ordered. Please feel free to contact our Homeowner/Warranty experts at 800-551-1508.
Date published: 2024-03-28
My drain stopper #RP5648 in polished brass has a single white plastic open loop at the base. It measures 4" in length., Your RP5648BP looks like grey plastic and it has a different configuration @ the base. Will it fit my drain?
Thank you for your question, Lorrie! Yes, this can replace models with a single loop. Simply install the horizontal rod through the top hole. You may need to adjust the location of the rod on the strap as well.
Best regards, Jon
Date published: 2024-03-28
what is the correct drain stopper for faucet model #2530-24
Hi Harry, Thank you for your question. The RP5648 is the stopper used in model 2530-24.
Thanks,
Dave
Date published: 2024-03-28
Stopper installation - loop and orientation
My current stoppers will only raise 1/8", even after disconnecting the linkage and pushing the rod fully down. This is inadequate to drain the sink (a small air bubble is enough to prevent drainage).
I am wondering if the builder installed the stopper correctly.
Which of the holes in the double loop should the rod go through? Should the stopper be oriented with the loop toward the front or back of the sink?
Thank you.
Hi Karl, Thank you for your question. To maximize the motion of the stopper you will want to place the horizontal rod through the lower loop. The loop can be either forward or back.
Thanks,
Dave
Date published: 2024-03-28
Can a 2 hole stopper replace a 1 hole stopper?
My faucet has a one hole stopper that looks like the RP5648BN. However, my faucet is chrome. And the chrome finish stopper RP5648 has 2 holes and does not look like my stopper. Should I get a slightly different looking stopper or a slightly different looking finish? Will the 2 hole stopper even work if my sink currently uses a 1 hole stopper? If not, will a stopper in a brilliance brushed nickel finish go with my chrome faucet?
Hi DB, Thank you for your question. The RP5648 when ordered as a replacement part will always have the 2 holes.This stopper is used in multiple drain types, some of which use the 1 hole and some that use the 2 holes. If you currently have a 1 hole you will need to cut off the 2nd hole to work with your drain assembly. The stopper has an indicator of where to cut.
Thanks,
Dave
Date published: 2024-03-28
My old stopper looks exactly like the one on the photo. But I'm not sure about the length. Mine is 5 inches. I've seen similar pieces, but 4 inches. Please confirm. Thx.
Thank you for your question, Olga! This is the only stopper that is available separately for our lift-rod operated pop-up assemblies. It will have two loops, with one at 4" and on at 5".
Best regards, Jon
Date published: 2024-03-28
How do I remove the stopper (part #RP 5648) to clean the gunk out? It doesn't seem to want to come out easily and I don't want to break it. Is there a trick to it?
Thank you for your question, Steve 5818! Depending on how this was originally installed, you may first need to remove the horizontal rod to take out the stopper. First, loosen the nut on the back of the drain, pull out the horizontal rod then you will be able to easily lift out the stopper.
Best regards, Edward
Date published: 2024-03-28
WHAT IF THE OVERALL LENGTH OF THIS STOPPER?
Hi, RAYMOND19!
Thank you for your question.The RP5648SS stopper measures 1-3/8" x 5".
Best Regards, Rosanna
Date published: 2024-03-28
is this the drain stopper that is 1 1/4 inch in diameter? i see the two holes, i assume they are 4 and 5 1/4 in long?
Hi, Mwilliams43!
Thank you for your question. The diameter of the Delta RP5648 Stopper Assembly measures 1 3/8". The two holes in the stopper assembly are measured at 4" and 5".
Best Regards, Rosanna
Date published: 2024-03-28
CAN YOU BUY THE RUBBER GASKET BY ITSELF FOR THE RP5648 STOPPER
Hi Bill,
Thank you for your question. Unfortunately, the gasket is only sold as part of the stopper.
Thanks,
Jon
Date published: 2024-03-28
Do you sell or even make drain replacement drain stoppers that say "Delta" on them?
Thank you for your question, Julie! Our drain assembly stoppers no longer have the Delta logo printed on them. We apologize for any inconvenience this may cause.
Best regards, Edward
Date published: 2024-03-28
is this the stopper that would be used with 520PBWF faucet; if not which should I order
Hi BB,
Thank you for your question. You will want to order the RP5648BB. That will match the brass finish on the 520PBWF faucet.
Thanks,
Dave
Date published: 2024-03-28
What is the diameter of the stopper?
Thank you for your question. The diameter of the cap is 1.35".
Date published: 2024-03-28
I have a stopper that is longer 5 1/4 inches long with only 1 loop whole. Is it a different part # ?
Thank you for your question, George! This stopper will work with any standard Delta pop-up assembly. It has been re-designed, so the original may have had a single loop.
Best regards, Jon
Date published: 2024-03-28
How do I install the drain stopper #rp5648
Thank you for your question, Larry! You will need to star by sliding the stopper into the flange. Next, you would need to go underneath the sink, and connect the horizontal rod to the opening at the bottom of the stopper. Hand tighten pivot nut to the horizontal rod, attach horizontal rod to strap using clip. After that is done, connect the top of the strap to the lift rod. I have included a link to a parts diagram, for you to refer to. If you need further assistance, feel free to contact us directly.
https://media.deltafaucet.com/PartsDiagram/RP26533_Pop_Up_Drain.pdf
Best Regards, Benjamin
Date published: 2024-03-28
What is the proper drain for 792-ss-dst faucet?
Hello Becky, Thank you for your question!
The 792-SS-DST single handle vessel lavatory faucet does not include a pop up drain. You can choose from any vessel bowl drain such as our RP6346SS.
http://www.deltafaucet.com/repairparts/details/rp6346ss.html
Best regards,
Brandis
Date published: 2024-03-28
Is this the only Delta popup Drain Stopper available?
I have a classic one lever ("crystal" knob lever-my model shows that it is discontinued) bathroom faucet that needs a new popup drain stopper. I found a replacement but the picture only shows one opening at the bottom for the "adjustment rod" to be attached through. My "good" stopper has 2 openings at the bottom for the "adjustment rod" to go through. Will this one opening popup stopper work in my drain?
Thank you for your question. Delta Faucet model # RP5648 does have a double loop at the bottom. The picture is incorrect. Thank you for bringing it to our attention so that we can get it fixed.
Date published: 2024-03-28
Laura J
Can the Drain Stopper model RP5648CZ be used for a bathtub?
Dear Laura J,
Thank you for your question. The Delta Lavatory Drain Stopper RP5648CZ, is too small to fit into a standard bathtub drain.
Best regards,
Tanya
Date published: 2016-10-15
Does this stopper say Delta on the top of the stopper?
All of my bathroom sinks have Delta faucets and drain stoppers, I'd like to replace the drain stoppers. The current drain stoppers say Delta on the top of the stopper and I'd like to replace them with ones that also say Delta on the top. The picture shown does not show that it says Delta on the top.
Dear Smaddox,
Thank you for your question. The Delta Drain Stoppers RP5648 no longer carry the Delta name on them.
Best regards,
Tanya
Date published: 2017-08-30
does this work with adiwon single fct 792-ss-dst
Hi, Marianne!
Thank you for your question. The Delta RP5648BN Stopper Assembly will not fit with the Delta 792-SS-DST Faucet as the stopper will need a lift rod to operate, which the faucet does not. We recommend a push pop up drain assembly such as the 72173-SS. Here is a link to this option:
https://www.deltafaucet.com/parts-product-detail?modelNumber=72173-SS
Best Regards, Rosanna
Date published: 2024-03-28
whate size is RP5648 drain stopper? what size drain hole with accomodate this drain??
Hi Becky, Thank you for your question!
Below is the technical specification on the RP26533 pop up drain that uses the rp5648 stopper.
http://www.deltafaucet.com/customersupport/documentation/522.html?document=ts&documentIndex=0#flashWrapper
Best regards,
Brandis
Date published: 2024-03-28
Delta Stopper 1 3/8 by 4"
The part I have to replace looks exactly like that, except it's 4" long, not 5" long. What would be the correct part number?
Hi N,
Thank you for your question. The stopper for our plastic pop-up assemblies are 4" long. This stopper will have two loops, with one at 4" and on at 5".
Thanks,
Jon
Date published: 2024-03-28
Hello. Will this part work for model #3555-RBMPU-DST? Thanks
Hello Carla,
Thank you for your question! I am happy to help you!
Correct, The RP5648RB will work with our Delta 3555-MPU-DST.
Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
We have this faucet with a push button stopper (you push it up/down w/o a lever). The gasket on the stopper head is worn and all I need is the gasket, I think this lever stopper gasket might work but want to avoid buying more than i need.
Hi aotk,
Thank you for contacting Delta Faucet Company!
We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2024-06-11
Can I buy just the threaded plunger used in the Windermere bath sink drain? That way I can continue to use my current drain cap that matches my set.
Hello Davevon,
Thank you for your question! I am happy to help you!
Our Delta RP5648RB does not have a separate parts that can be ordered, the stopper comes as one piece.
Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Hello! Our 4 year old twisted off the cap of the stopper- and flushed it down the toilet. Would I just be able to buy the cap of the stopper since it screws off?
Hello MariaV,
Thank you for your question. Unfortunately, the entire Delta RP5648RB would need to be purchased as the cap is not a separate item available for purchase. Please contact us directly for further assistance.
Best Regards,
Carrie
Date published: 2024-03-28
What is the diameter of the top of the drain stopper RP5648RB? I need to replace just the top that screws off. The finish is coming off right in the center. The diameter of mine is 1-3/8”. It was installed 3 years ago.
Hello Patty,
Thank you for your question! I am happy to help you!
The diameter of the our Delta RP5648 Stopper Assembly measures 1 3/8".
Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Does this part work with the Delta Windemere? I need to replace one of my bronze stoppers.
Hi Melissa,
Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you.
Our Delta Faucet Delta® Drain Stopper - Bathroom In Venetian Bronze MODEL#: RP5648RB would work with your Windemere faucet and the plastic pop-up assembly.
Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.