Delta®
Tuercas de bonete (2) - Para cocina o baño de dos manijas en cromado
N.º de modelo: RP6060
Image Thumbnail, click to view zoomed product image 
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
7/16
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 5 out of
5
by
donc from
perfect
[This review was collected as part of a promotion.] Bought to replace bonnet nuts that previous owner apparently didn't have the right tool for. Perfect fit.
Date published: 2016-11-30
Rated 5 out of
5
by
BigDan from
Not a Plumber
Order from parts list -Perfect match worked instantly! Hot water again!
Date published: 2008-12-27
Preguntas y respuestas
Hello, today I replaced the stem unit in my Delta Faucet bathroom sink with the Delta RP25513.Will MODEL#: RP6060 - work with the Delta RP25513 Stem Unit with my Delta Bathroom Lever handle sink? If not, what Bonnet nut will work with that Stem unit size?
Hello JayJay,
Thank you for your question, I would be happy to help you.
The RP6060 will work for RP25513 that was installed in your faucet.
Please contact us back for any further questions or concerns.
Best Regards, Nicole
Date published: 2024-03-28
Will this fit my kitchen Delta sink. I'ts an old one, double white handles, up and over spout. attached sprayer.
I need to tighten up this bonnet nut, what size wrench would I use? I cannot use my hand to tighten this.
Hello Danni,
Thank you for your question. We are happy to help!
The Delta Faucet part number RP6060 bonnet nuts have an outside diameter of 1-1/16".
Best regards,
Bryan
Date published: 2024-04-13
We have what looks like a Victorian wide-spread faucet that was installed around 2006. I need to replace the bonnet nuts, but they do not look like these ones. Will these bonnet nuts fit on a 2006 model?
Hi David,
Thank you for contacting Delta Faucet Company!
We will need more information to better assist you. Please watch out for an email from customerservice@deltafaucet.com.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-03-28
What size wrench is needed to remove the "Bonnet Nut" on a two stem bathroom faucet, is it SAE or Metric??
Thank you for your question, Bill! The Delta RP6060 bonnet nut does not require the use of a wrench for removal. The bonnet nut can be removed by hand. The faucet handles that would have this bonnet nut would use a 3/32" Allen set screw.
Best Regards, Benjamin
Date published: 2024-03-28
My kitchen sink requires RP60532 bonnet nut, but it has been discontinued. Will this bonnet work in its place?
Hello Flowers711,
Thank you for contacting us.
I apologize that the information you are looking for is not readily available for you; however, I am happy to help you.
Yes, the Delta RP60532 was replaced by the Delta RP6060.
Best Regards, Emma
Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Date published: 2024-03-28
What are the dimensions of these.
Hi Mk27,
Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you.
The Delta Faucet Bonnet Nuts (2) - Two Handle Kitchen Or Bathroom In Chrome MODEL#: RP6060 thread size is 1"-24. The top measurement is .813 and the O.D. is 1 and 1/16".
Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance.
Best Regards,
Kelley
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.