Delta®

Plastic Pop-Up Assembly - Less Lift Rod in Chrome

N.º de modelo: RP62472
Agregar a favoritos
Busque instaladores locales de Delta®
Delta®
Plastic Pop-Up Assembly - Less Lift Rod in Chrome
N.º de modelo: RP62472
Precio de lista: $46.45
Precio en línea: $37.16
Envíos sin cargo para todos los pedidos de más de $49
Agregar a favoritos
Busque instaladores locales de Delta®
Documentos y especificaciones
Información de instalación
Altura total:
5
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 2 out of 5 by from tailpiece outside diameter smaller than standard the tailpiece is less than 1 1/4 inch. Closer to 1 1/8 inch. Which means that the standard gasket through which the tailpiece protrudes, which is made to fit over an 1 1/4 OD tailpiece, has a gap which admits draining water. I noticed this when foaming soap was used for hand washing. Bubbles flowed right up around the tailpiece. Solution: Delta could provide a gasket with an 1 1/8 inch through-hole to slip over the tailpiece. Note: the 1 1/8 inch gasket I referenced above is NOT a standard size. At least one plumbing supply house I contacted does not carry a gasket of that size (it makes up into an 1 1/2 p-trap with a coupling nut) further note: the p-trap is PVC. Standard 1 1/2, nothing fancy. Was working fine with the old chrome 1 1/4 inch tailpiece coming off a Delta drain assembly. Reality solution: old standby plumber's putty.
Date published: 2023-09-11
  • y_2024, m_11, d_4, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_RP62472, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

Is there a gasket or seal under the stopper flange? I have a leak between the flange and the bottom of the sink. Instructions call for a silicone bead

Asked by: scoop
Hi scoop, Thank you for your question. We do recommend to use silicone under the flange. Unfortunately, we do not provide a gasket to go between the flange and sink. Please be sure to allow the silicone to fully cure (usually 24 hrs) before running water from the faucet. However, the included gasket should seal against the under side of the sink. If the sink is rough or uneven, you may need to use a thin bead of silicone. Please not that this pop up will only work with sinks with a depth of 1 5/8 - 2 3/8". Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Can you order the rod for the drain lift?

The end of it rusted off .Tried a short one and its a problem
Asked by: rusty
Hi Rusty, Thank you for your question. The lift rod that will work with the RP62472 drain assembly is the RP6146. If you need the horizontal rod then RP12517 should work. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Is there a part number for just the nut that hold the horizontal (ball) rod in?

Looking for the nut that holds the ball/rod in for the plastic pop-up assembly.
Asked by: buchanab
Hi buchanab, Thank you for your question. The nut is not available separately. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

How to order longer horizontal rod,one in the box is not long enough,need one with 10 inch long,installed undermount sink ,wide spread

Asked by: Temo
Hi Temo, Thank you for your question. Unfortunately, we do not manufacture a longer horizontal rod for the RP62472 Plastic Pop-Up assembly. However, we do manufacture a Metal Pop-Up assembly and Push Pop-Up assembly. We also do have longer horizontal rod options for the metal pop-up assembly. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP26533 https://www.deltafaucet.com/parts-product-detail?modelNumber=72173 Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Can I just get the rod with the ball on it?

Can I just get the rod with a ball on it or do I have to buy the whole drain and every thing? The original rusted into two pieces poor design. Just over two years old.
Asked by: John V
Hi John V, Thank you for your question! You will need to order the RP12517 horizontal rod. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

What is the difference between this model # and the models below?

RP62472-ob RP62472-rb
Asked by: Freda
Hi Freda, Thank you for your question. The only difference between the 2 model numbers is the finish. The RP62472-OB is the oil rubbed bronze finish, and the RP62472-RB is the venetian bronze finish. The Venetian Bronze has more of a brushed look than the Oil Rubbed Bronze. Also the Oil Rubbed Bronze has a blacker tint to it. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

I need to replace the Horizontal Rod on my Delta Two Handle Lavatory Faucet. Model #25996LF. Can you please tell me the part # for the replacement? I saw that a customer asked the same question, but your answer didn't give her the part #. Thanks Barry

Asked by: Barry
Hi, Barry! Thank you for your question. The part number of the horizontal rod for the Delta RP62472 Pop Up Drain Assembly is RP12517. Here is a link to the part number: http://www.deltafaucet.com/repairparts/details/rp12517.html?showPhotoGallery=false Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can I get just the plastic rod on the popup assembly

Asked by: Dave
Hi Dave, Thank you for your question! The part number of the horizontal rod for the RP62474 pop up assembly is RP12517. Below is a link to the item: http://www.deltafaucet.com/repairparts/details/rp12517.html?showPhotoGallery=false Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28
  • y_2024, m_11, d_4, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_90
  • loc_en_US, sid_RP62472, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 5ms
  • questions, product