Delta®

Drain Assembly- Plastic Pop-Up - Less Lift Rod - Bathroom in Stainless

N.º de modelo: RP62472SS
Agregar a favoritos
Busque instaladores locales de Delta®
Delta®
Drain Assembly- Plastic Pop-Up - Less Lift Rod - Bathroom in Stainless
N.º de modelo: RP62472SS
Precio de lista: $73.20
Precio en línea: $55.76
Free Ground Shipping All Orders $49+
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
Technology and Special Features
Acabado Brilliance®
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
5
Tipo de válvula:
NA
RESEÑAS
Rated 1 out of 5 by from Poor design Horizontal rod is too short to work drain plug
Date published: 2025-03-31
Rated 2 out of 5 by from Poor finish Poor finish on drain plug. Finish came off after 2 years of use.
Date published: 2025-01-13
Rated 2 out of 5 by from Matte Black finish peeled off The drain assembly has not held up. Like another customer, our matte black coating peeled off revealing the brass base less than 3 years after install. We will try another brand for replacement.
Date published: 2025-01-06
Rated 2 out of 5 by from Not the best The bronze ring portion wore off within three years and became copper.
Date published: 2025-01-05
Rated 1 out of 5 by from Cheap plastic brakes easy Broke while installing very cheaply made.
Date published: 2024-11-11
Rated 2 out of 5 by from tailpiece outside diameter smaller than standard the tailpiece is less than 1 1/4 inch. Closer to 1 1/8 inch. Which means that the standard gasket through which the tailpiece protrudes, which is made to fit over an 1 1/4 OD tailpiece, has a gap which admits draining water. I noticed this when foaming soap was used for hand washing. Bubbles flowed right up around the tailpiece. Solution: Delta could provide a gasket with an 1 1/8 inch through-hole to slip over the tailpiece. Note: the 1 1/8 inch gasket I referenced above is NOT a standard size. At least one plumbing supply house I contacted does not carry a gasket of that size (it makes up into an 1 1/2 p-trap with a coupling nut) further note: the p-trap is PVC. Standard 1 1/2, nothing fancy. Was working fine with the old chrome 1 1/4 inch tailpiece coming off a Delta drain assembly. Reality solution: old standby plumber's putty.
Date published: 2023-09-11
  • y_2025, m_7, d_8, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_RP62472SS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

What is the size of the down pipe, I am trying to find a compatible connection to the main drain line because the down pipe is too short and not as wide as what was pre-existing.

Asked by: Steve
Hi Steve, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet Delta Plastic Pop-Up Assembly - Less Lift Rod In Chrome MODEL#: RP62472 diameter is in the specification sheet below. https://media.deltafaucet.com/SpecSheet/DSP-L-35757LF%20Rev%20D.pdf Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

what is the diameter of this drain pipe?

Asked by: HuxP
Hi HuxP, Thank you for your question about the Delta Faucet RP62472BL. The tailpiece has a 1-1/4" diameter. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Is the pop up part of this drain available

Asked by: Sharon
Hello Customer! Thank you for your question and we are happy to help. Unfortunately, the pop-up is not available individually. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Carrie
Date published: 2025-05-12

Can you please send me the installation instructions for the RP62472 plastic pop-up assembly and can you use plumbers putty to seal the flange at the sink.

Asked by: TERRY
Hi TERRY, Thank you for your question! Please see diagram 2 on page 3 for instructions on installing the RP62472 drain assembly. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-09-06

How can I get a longer ball rod stick? The current part in the set is not long enough. My faucet is offset from the sink and the ball rod lever does not reach the lever to raise the stopper. need probably 9" ball rod lever. Thanks

Asked by: Ryan
Hello, Ryan Thank you for your question. I apologize the horizontal rod is not long enough. I am happy to help. We have a longer horizontal rod that is long enough for your sink. The part number is RP33805. It is 10 1/8 inches. Please contact us directly if you have any further questions. Best Regards, James
Answered by: Delta7
Date published: 2024-03-28

I have just installed this drain and ran water to check for leaks. I found it leaking from the back side where the rod goes in, I did use the plumber tape,so I tightened it a little more and have cracked the nut that holds this rod. I have no gasket here?

Asked by: Tater4
Hi Tater4, Thanks so much for contacting Delta Faucet Company about, RP62472! The black rubber gasket and white plastic pivot seat are usually inside the tailpiece, where the horizontal rod connects. The nut that holds the horizontal rod in the tailpiece is not available separately. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-27

Is it possible to just get a replacement pivot nut and stopper in oil rubbed bronze? My faucet is working wonderfully, however the finish on the pivot nut/stopper have hard water stains and is no longer oil rubbed bronze. I don’t need the entire assembly.

Asked by: Terbear
Hello Terbear, Thank you for your question about the Delta Faucet model RP62472OB Drain Assembly- Plastic Pop-Up - Less Lift Rod - In Oil Rubbed Bronze. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! Unfortunately, a replacement pivot nut for this drain assembly is not currently available as an individual part. I apologize for the inconvenience this causes. The replacement stopper RP5648 is not available in oil-rubbed bronze. RP5648RB in Venetian bronze would be the closest match. We would recommend replacing the RP62472OB drain assembly. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

The drain assembly has paint/finish has g Flaked away in one of the two sinks. Will delta replace this part. Oil rubbed bronze

Asked by: Jeff
Hi Jeff, Thank you for contacting Delta Faucet Company! I see you are being assisted by one of our customer service representative. I have included a link below to the Limited Lifetime Warranty. https://www.deltafaucet.com/warranty Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

I placed a order for two bronze popups several years ago and need to order two more but not sure of the item number that I ordered.

Asked by: Judie Lenson
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-06-21

Need a delta RP624720 without overflow , overflow at nut height and leaks

Asked by: Scott
Hi Scott, Thank you for your question. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet Delta Drain Assembly- Plastic Pop-Up - Less Lift Rod - Bathroom In Oil Rubbed Bronze MODEL#: RP62472OB is not available without overflow. Unfortunately, we offer a grid strainer less overflow RP47648 and push pop-up style drain assemblies less overflow models 72172, and 72174. Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Will this pop-up fit/Work with a 15757LF – RB Faucet?

Asked by: Lionel
Hi Lionel, Thank you for your question about the Delta Faucet RP62472OB. This drain would be a replacement for the faucet model 15757LF-RB. The oil-rubbed bronze (OB) finish is similar to our Venetian bronze (RB) finish. The drain is also available in Venetian bronze finish as RP62472RB. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-01-21

Will this part replace the RP38958 parts on a Lahara sink?

Asked by: Howard
Hi Howard, Thanks for your question regarding RP62472BN! The RP38958 is available. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Does the pop-up rod come with this assembly?

Asked by: Maxine
Hi Maxine, Thank you for your question about the Delta Faucet RP62472PB. The lift rod or pop-up rod is not included. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-06-03

Hi, I have a Delta Windemere Centerset Bathroom Faucet in Oil Rubbed Bronze and am wondering if this replacement set will work okay with it. ALso, are both pieces plastic, and if so, are metal replacements available? Thank you

Asked by: Hedley
Hi Hedley, thanks for your question regarding RP62472OB! RP62472OB is made of non-metallic parts; however, we have a Metal Pop Up drain assembly. The model number is RP26533OB. Here is a link to this assembly: https://www.deltafaucet.com/parts/product/RP26533OB.html Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

how can i tell the finish between oil rubbed bronze and venetian bronze?

Asked by: Don1122
Hello Don1122, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! The finish on our Delta Faucet DELTA® rain Assembly- Plastic Pop-Up - Less Lift Rod - Bathroom MODEL#: RP62472OB is described as a dark, muted finish with bronze highlights and the RB finish is described as a low-gloss, deeply warm finish with subdued highlights. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Is this available for a sink without overflow?

Asked by: Rich
Hi Rich, thanks for your question regarding RP62472! I have included a link below to our Pop-Up Assemblies that are Less Overflow. Please feel free to contact us with any questions or for further assistance. https://www.deltafaucet.com/search-results?q=less+overflow&lang=en_US Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Is this part available with a 12" pipe ?

Asked by: T Bone514
Hi T Bone514, Thanks so much for contacting Delta Faucet Company about, RP62472! The tailpiece is 4 7/8" from the horizontal rod to the end of the tail pipe. Adapters can be added to extend the pipe further, and those can be found at a local plumbing store. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-04-04

This assembly came with our faucet that we purchased.The two Large Holes on the down pipe are leaking as our sink does not have a compartment area to contain the water that flows past them.Packaging didn't mention this type of down pipe.What can we do?

Asked by: Str1ve13
Hello Str1ve13! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. You will need a pop-up assembly that is for a sink without overflow. We recommend part number 72172. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

Can you tell me the diameter of the cap in the RP62472RB popup? Thanks!

Asked by: Mark
Hi Mark, Thanks so much for contacting Delta Faucet Company! The RP62472RB stopper measures 1-3/8" x 5". Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

We have a model 2571LF faucet where the horizontal rod inside the drain rusted out. In the manual you listpar number RP62472 that is the entire drain assembly. All I need is the rod with the ball on it. Is there a separate part number for it?

Asked by: Ihor
Hi Ihor, Thanks so much for contacting Delta Faucet Company about, RP62472! I have included a link below to the horizontal rod needed for your pop-up assembly. https://www.deltafaucet.com/parts/product/RP12517.html Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-28

Is the pop up center stopper piece available separately for the Portwood model 25770LF? Because 1 of the 3 faucets I purchased was missing that piece.

Asked by: Sandy
Hi Sandy, thank you for your interest in the RP62472! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-14

Is this a non overflow assembly? RP62472CZ

Asked by: KLR8710
Hi Karin, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Yes, our Delta Faucet RP62472CZ is a non-overflow assembly. Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I need a RP62472. Is this part covered under lifetime warranty? That's the one reason I bought Delta faucets.

Asked by: newgeek
Hi newgeek, Thank you for your question about the Delta Faucet RP62472 Plastic Pop-Up Assembly. I am sorry this information was not readily available, and I am happy to help! All Delta Faucet parts and products purchased from authorized sellers are covered by the Lifetime Limited Warranty. See more information here. https://www.deltafaucet.com/warranty Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I am trying to find a replacement nut for your Plastic Pop-Up Assembly - Less Lift Rod MODEL#: RP62472. Similar nuts from the hardware store do not fit, leaving me to assume that this is a Delta only part. Do you have replacements for this single nut?

Asked by: Jason
Hello Jason, Thank you for your question about the Delta Faucet RP62472 Plastic Pop-Up Assembly - Less Lift Rod. I apologize for any difficulty finding this information. We are happy to help! The pivot nut for this pop-up is unfortunately not available as an individual part. We apologize for any inconvenience this causes. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

MODEL#: RP62472OB  Is it possible to obtain just the pop up actuator, the rod with the white plastic ball only? The portion in the sink has rusted away, everything else is in great shape. Thx!

Asked by: Dave
Hi Dave, thank you for contacting Delta Faucet Company! We apologize for the inconvenience you have experienced! The horizontal rod included with our RP62472OB does not have a separate part number. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2023-06-05

For Delta Drain Assembly plastic pop-up in oil rubbed bronze, RP624720B The bronze drain part that is exposed at bottom of sink is discolored. Can I purchase just that part?

Asked by: Gerald
Hi Gerald, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Unfortunately, the Delta Faucet Drain Assembly- Plastic Pop-Up - Less Lift Rod - Bathroom In Oil Rubbed Bronze MODEL#: RP62472OB flange is not available on its own. If the individual part is needed, the whole RP62472OB drain assembly would need to be replaced. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Customer Service
Date published: 2024-03-28

I just want the cap for the pop up plug and the ring that attaches to the sink as mine are worn out.  All the other parts are in good shape.  Can I just order those?

Asked by: Debbie
Hi Debbie, Thanks so much for contacting Delta Faucet Company! Unfortunately, the stopper part for the Drain Assembly Bathroom MODEL#: RP62472OB is not available as a separate part. We do apologize for any inconvenience this may cause. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

Hi there, what is the diameter of the plastic ball, and do you sell the rod with the plastic ball in a longer length? Thank you

Asked by: Loki
Hi Loki, Thanks so much for contacting Delta Faucet Company about RP62472BN! The ball on RP12517 has a diameter of 23/32nd, we do have a few longer options and I have included a couple links below. Our longest horizontal rod is RP39922, which is 11 13/16" in length. http://www.deltafaucet.com/repairparts/details/rp39922.html 10 1/8" https://www.deltafaucet.com/parts/product/RP33805.html Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

I just installed a Delta center set 2 Handle faucet in brushed nickel, unfortunately part of the pop-up drain is missing . It is the plug that fits in the top of the drain. Could you please send me the replacement part? Model number 25704LF-SS

Asked by: Beanie
Hi Beanie, Thanks so much for contacting Delta Faucet Company about, RP62472BN! For the quickest turn around, we would recommend for you to return to the place of purchase for an exchange. If the store does not assist you, please contact us directly, as we would need more information to better assist you. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-15

Hello, do you have the rubber washer for the Plastic Pop-Up Assembly - Less Lift Rod MODEL#: RP62472 ?  I just need the rubber seal that fits just under the drain stopper.  Need 3, all three sinks have started leaking.

Asked by: BrianS
Hello BrianS, Thanks so much for contacting Delta Faucet Company! The top flange part on the Delta RP62472OB Pop Up Drain assembly is not available on it's own. If the individual part is needed, the whole RP62472OB drain assembly would need to be replaced. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Kelley
Date published: 2025-01-09
  • y_2025, m_7, d_8, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_97
  • loc_en_US, sid_RP62472SS, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 52ms
  • questions, product