Trinsic®
Ver toda la colección para baño Trinsic®

Conjunto de rociador - Extensible en cromado

N.º de modelo: RP64069
Agregar a favoritos
Busque instaladores locales de Delta®
Trinsic®
Ver toda la colección para baño Trinsic®
Conjunto de rociador - Extensible en cromado
N.º de modelo: RP64069
Precio de lista: $95.25
Precio en línea: $72.56
Free Ground Shipping All Orders $49+
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
Technology and Special Features
Cumplimiento con la ADA
Acoplamiento MagnaTite®
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
3/8
Caudal:
1.8 gpm a 60 psi, 6.8 l/min. a 414 kPa
Tipo de válvula:
NA
RESEÑAS
Rated 2 out of 5 by from Stick with Kohler My home is about 5 years old and this faucet has been a dissapointment (as has other Delta products). We have had problems with the pull down sprayer for about a year and a half now. I have consistently cleaned the spray area and it helped until now. The plastic fitting in the pull down head is now spraying water at the crevice where the plastic meets the metal. And the plastic hole areas are discoloring and are misshapen. I have a whole house water purifying system. I should have stuck with Kohler.
Date published: 2025-03-28
Rated 1 out of 5 by from Poor Design Worked perfectly for just over one year and then the flow rate dropped to almost nothing. Soaked in vinegar and the flow rate improved for about a week and then dropped again. Very poor design as the internals are not serviceable and the replacement part is very expensive and comes with a hose that is not needed.
Date published: 2025-03-04
Rated 1 out of 5 by from Poor design Spray nozzle clogged in less than 2 years. Poor design that it’s not cleanable and have to buy a new one.
Date published: 2025-02-02
Rated 1 out of 5 by from Expensive replacement Ridiculous that I was unable to clean this faucet wand because the aerator is not removable. I submerged it in white vinegar just for the vinegar to get trapped in the wand along with the build up. I had a well pump replacement which ended up clogging several faucet aerators. Most were simple fixes but Delta of course makes me spend $75 for a replacement part with hose that I don’t need!
Date published: 2024-12-23
Rated 2 out of 5 by from No maintenance, must buy new replacement! When sprayer is new it works great. After 7 years we noticed a lack of flow. Cannot fault the sprayer for getting clogged up, but I can fault the company for not making it cleanable. I didn’t have calcium or hard water, but a gasket had deteriorated and flowed into the nozzle. No presecreen at this unserviceable sprayer which could have filtered out small particles makes a poor design.
Date published: 2024-11-26
Rated 1 out of 5 by from No Aerator Key Slots-can't clean the head This product is the only faucet I've ever seen that doesn't have a removable aerator. We have hard water and there is often mineral in our main water line. Well you can't clean this (the soaking in vinegar recommendation doesn't work). There are very similar items by other manufacturers that have slots on the sprayer for an aerator key so you can remove and clean the aerator. Only solution for a clogged head with this Delta product is to buy another replacement head (which they make you buy the sprayer hose too, which you don't need-just need a new head), which costs close to $100. This is either really poorly designed, or it is intended to force you to buy more parts.
Date published: 2024-03-11
Rated 5 out of 5 by from New part I purchased a new sprayer for my faucet and it really works very well now. Very easy to install!
Date published: 2022-10-03
Rated 5 out of 5 by from Perfect replacement! Looks and works great. It’s like a new faucet. fast and easy to Install.
Date published: 2021-04-15
  • y_2025, m_6, d_1, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_RP64069, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

Is there a built-in filter? I have build up and didn't know if/how to take apart just the sprayer assembly. I don't think I need the whole line but want to make sure there is no build up in the sprayer assembly. Thanks!

Asked by: Mike
Thank you for your question, Mike! The wand can be unscrewed from the hose and you will find a debris screen on the back of this wand. Simply rinsing this filter will clean out any buildup. We would also recommend pointing the hose into the sink and turning the water on to a full mixed position to flush out any further deposits. Please feel free to contact us directly if you need further assistance. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-07-23

the hose assembly is different than original how do i connect it

Asked by: janice
Hi Janice, Thank you for your question. The new hose should thread directly into the wand. There may be an adapter. To remove it, press the round tab and unscrew. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

How do you unclog sprayer Assembly RP64069 on 9159T-DST model Kitchen sink faucet

Asked by: Kishor
Hi Kishor, Thank you for your question. To dissolve any sediment that may collect in the aerator or spray face, just soak the face of the spray assembly in a 50/50 or stronger mixture of white vinegar and tap water for 10 to 15 minutes. The large particles of debris are caught in the bottom end of the spray assembly, where it connects to the hose. Just unscrew the spray assembly from the hose assembly and flush the debris out with water from the hose. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-07-23

O Ring

The o ring broke apart, so now the sprayer shoots water up. What size is the o ring in side the trinsic sprayer so I may replace? Thank you.
Asked by: Jenn
Should be covered by warranty.
Answered by: Standover
Date published: 2024-03-28

What is the size of the hose assmbly that attaches to this sprayer, and is there an adapter to 3/4" hose available?

I have this sprayer on my kitchen sink faucet (DPD-K-9159-DST.) I would like to be able to connect a bottle washer that uses a female 3/4" garden hose connector. There's no direct access on the sprayer itself for a thread adapter. Is there anything available to convert the hose assembly to 3/4" garden hose?
Asked by: CritZero
Hi CritZero, Thank you for your question. The hose has a thread size of .625-18. We do not make an adapter for the hose. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-04-06

How do I disassemble sprayer after removing it from the hose?

I have cleaned all accessible areas and soaked the sprayer overnight in vinegar, but the flow is still very low. The spray function works well, but the regular flow function is weak. Something must be clogged within the sprayer part. Is there a way to disassemble it and clean it?
Asked by: Pam
I have replaced this RP64069AR assembly three times in three years. I finally figured I had enough pieces to take it all apart and see what the problem with the push valve was. I can tell you that there are 4 small rubber O rings in this tiny push valve. When they get worn out over time from switching from spray to solid flow, the valve fails or sticks. It's rubber on plastic and it doesn't take much due to the valves tiny size. My advice, avoid switching from spray to solid flow too often. Keeping it in one position as much as possible will lengthen the life of this faucet head.
Answered by: BobbyT
Date published: 2024-03-28

Can the debris screen be replaced and if so how? Is there a model number for the screen? The screen in our unit completely fell apart and was thrown away before I could get specifics.

Asked by: larry
Thank you for your question. Larry! The screen/aerator of the Delta Wand Assembly RP64069 is not a removable part, the full wand assembly would need to be replaced. Please feel free to call, email, or message us on social, if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-07-23

Is it possible to purchase this sprayer assembly with a flow rate that is higher than 1.8 gpm? Since it doesn’t appear that the aerator can be changed. 

Asked by: Sean
Thank you for your question, Sean. Unfortunately, we do not currently offer a sprayer assembly with a higher flow rate. Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

can the trask sprayhead be dissassembled to clean out sand?

Asked by: Daniel
Thank you for your question, Daniel! A Delta sprayer assembly wand is not designed to be taken apart as doing so will damage the internal mechanism while voiding the warranty. You can try pouring a 50/50 mixture of white vinegar and water directly into the wand as well as using the Touch-Clean spray holes however if that does not help, please contact the warranty department directly for further assistance. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-07-23

How can I determine if my 19933T-SD-DST faucet is Stainless or Spotless Stainless?

Asked by: Collinswood
Hello, Thank you for your question! On the hot supply line under the sink will be a tag with the model number on it. If your model number includes an "SP" then it features the SpotShield technology. Standard stainless steel finishes have the "SS" designation. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-04-28

Can I replace this part myself ? 

Asked by: Finolobo
Hi, Finolobo! Thank you for your question. The Delta RP64069SP Sprayer and Hose Assembly can be installed by you, the home owner. To replace, make sure the handle is in the off position. Remove the hose clip that secures the connection to the valve end under the sink. Pull the hose connection up and out from the top of the sink. The new hose connection can then be snaked back into the faucet and secured with the hose clip. Please feel free to call, email, or message us on social. Best regards, Rosanna Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-07-23

Hi, the button that switches between the spray function and regular stream is getting stuck. Can I fix that or do I need to replace this? Is this the correct replacement piece for the 9159-CZ-DST Trinsic Pull Down Sprayer Kitchen Sink Faucet, SingleHandle

Asked by: Laurie
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-02-12

Can the sprayer for Delta RP64069AR be taken apart and cleaned?

Asked by: Larry
Hi, Larry! Thank you for your question. The Delta RP64069AR sprayer assembly can be unscrewed counterclockwise from the hose connection to remove and be cleaned. We recommend to soak in a solution of 50% white vinegar and 50% water for an hour or even overnight to clean. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-07-23

Is just the spray nozzle sold separately?

Asked by: Spray nozzle Head
Hello Spray nozzle head, Thank you for your question! I am happy to assist you! The Delta RP64069 is not available without the hose assembly. Please contact us back with any further questions. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

Can the sprayer head be ordered separately? (Don't need to replace the hose.)

Asked by: Doug4
Hello Doug4, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Trinsic® Spray Assembly - Pull-Down In Chrome MODEL#: RP64069 is only available with the wand and hose, the wand is not available separately. Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

We have a Delta kitchen faucet that needs a new head assembly (RP64069).  How do we determine the correct color finish? 

Asked by: David

Is just the sprayer section (without the hose) available for replacement. The spray selector on does not switch (cleanly) between spray and single stream.

Asked by: CI212
Hi CI212, Thanks so much for contacting Delta Faucet Company! The TRINSIC® Spray Assembly MODEL#: RP64069 can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-20

Is the magnet and washers included?

Asked by: Richard
Hi Valued Customer, Thank you for your question regarding our Delta Faucet RP64069. The magnet and washer are not included. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-06-17

Hi, The magnet ring of my Trinsic Touch2O (purchased in 6/2016) broke. As a result the spray assembly no longer stick to the faucet body. Is this the right part to fix the problem? And can I do it myself? Thanks, Chai

Asked by: Chai
Hi Chai, Thanks so much for contacting Delta Faucet Company! The Magnet Replacement Kit MODEL#: RP80977 will fix this issue for you. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Do you have a length on the pull down hose?

Asked by: dmg2
Good morning dmg2, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta TRINSIC® Spray Assembly - Pull-Down MODEL#: RP64069 is a 62" Hose. Thank you for being a loyal Delta customer. Please contact us back with any further questions. Best Regards, Themar
Answered by: Delta
Date published: 2024-03-28

Is the spray end nozzle available separately? I have a 4 year old faucet and the "chrome" is peeling off the nozzle.

Asked by: jeff24
Hello jeff24, Thank you for reaching out to Brizo Faucet Company! Our RP64069 includes the hose, the wand is not available by itself. We apologize for any inconvenience this may cause. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-01-31

I am not sure what color stainless I have.  I purchased in 2013 and need to replace the extending hose/faucet.   Can you verify which stainless options were available in 2013?  Thank you 

Asked by: Kimberly
Hi Kimberly, Thank you for your question about the Delta Faucet RP64069 TRINSIC® Spray Assembly. I am sorry this information was not readily available, and I am happy to help! Arctic Stainless was introduced in 2011. SpotShield Stainless was introduced in 2015. Black Stainless was introduced in 2018. This part was available in Stainless SS and Arctic Stainless AR in 2013. The full model number on the label attached to the faucet supply line will indicate the finish. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I have a delta RP64069 wand sprayer for my Trinsic faucet. Do you have a replacement sprayer head with SprayShield that will fit on my Trinsic faucet? Thanks!

Asked by: Mick
Hello Mick, Thank you for your question about the Delta Faucet RP64069 TRINSIC® Spray Assembly - Pull-Down. I apologize for any difficulty finding this information. We are happy to help! Our current selection of faucets in the Trinsic collection does not include ShieldSpray technology. Unfortunately, we do not carry a spray head with ShieldSpray technology designed for a faucet model in the Trinsic collection. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

Can you please provide installation instructions???

Asked by: Barry
Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! I have included a link below that shows how to change out our wand assemblies. Please reach out with further questions. Best Regards, Kayla https://support.deltafaucet.com/s/article/How-to-Replace-or-Upgrade-a-Delta-Kitchen-Faucet-Pull-Down-Spray-Wand-1628025862637
Answered by: Customer Service
Date published: 2024-03-28

Will this fit the delta Trask kitchen faucet. #19933

Asked by: Ted88
Hi Ted88, Thanks so much for contacting Delta Faucet Company! Yes, the TRINSIC® Spray Assembly MODEL#: RP64069 can be used with the TRASK™ Single Handle Pull-Down Kitchen Faucet MODEL#: 19933. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-19

Spray head (Spray assembly Model # RP64069) leaks when set to full flow.  no leakage with spray setting. Can I replace the spray head without replacing the full hose? Can I purchase the spray head only?  

Asked by: Wet faucet owner
Hi Wet faucet owner, Thanks so much for contacting Delta Faucet Company! The TRINSIC® Spray Assembly MODEL#: RP64069 is not available without the hose. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-30

Hi, as Laurie mentioned below, my button is also getting stuck and I would like to replace it. Moreover, the magnet on the main faucet got rusty so I replaced it (rp80977) but the sprayer still does not click back. Was there a magnet on the sprayer?

Asked by: Kari
Hi Kari, Thank you for your question about the Delta Faucet RP64069 replacement pull-down sprayer. For a stuck button, I recommend soaking the sprayer in 50/50 white vinegar and water. This can help remove mineral deposits that have built up and may be causing the issue. If the button is still stuck, the sprayer would need to be replaced. The sprayer does have a magnet, but any rust would typically be caused by an issue with the magnet inside the spout. If the coating is defective or damaged, the spout magnet will begin to rust. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-03-03

Hi I just need the aerator for this model Trinsic

Asked by: Rockstar

Can the RP64069 spray head be taken apart and cleaned to remove debris or does have to be replaced. IF it can be taken apart are there any instructions available on how to do so?

Asked by: Chuck Foyt
Hello Chuck Foyt, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet part RP64069 Trinsic® Spray Assembly - Pull-Down In Chrome is not recommended to be taken apart. To properly clean it, we recommend soaking it in a 50/50 solution of white vinegar and water for 15-30 minutes. Please contact us back directly via email with any further questions. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

How can I take the RP64069 faucet head apart to clean out the calcium deposits?

Asked by: Don_T
Hello Don_T, Thank you for your question, I would be happy to help you. We recommend soaking the wand in a 50/50 mixture of water and white vinegar, for about 30-45 min. Please contact us back for any further questions or concerns. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28
  • y_2025, m_6, d_1, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_70
  • loc_en_US, sid_RP64069, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 48ms
  • questions, product