Delta®
Slide Mechanism - Transitional Slide Bar in Chrome
N.º de modelo: RP64152
Image Thumbnail, click to view zoomed product image 
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
1 5/16
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 1 out of
5
by
Clark from
Droop
I have three slide bars with this mechanism and all of them droop down and will not hold the handheld shower up.
Date published: 2023-06-06
Rated 2 out of
5
by
Robert from
Does not hold shower head up.
Cannot keep shower head in place just droops down
Date published: 2022-11-30
Rated 1 out of
5
by
Rachel from
Just doesn’t stay in place
The tension on this isn’t strong enough. The shower just flops downward and starts spraying the floor. Same problem as Margaret described. It just doesn’t work after about a year of use.
Date published: 2021-05-06
Rated 1 out of
5
by
MARGARET from
Will not hold shower head in place
I had this shower slide bar installed by a contractor and the shower head continually drops down instead of staying in place. It stays in place on the slide bar but the hand held drops when in the holster.
Date published: 2019-12-10
Rated 5 out of
5
by
alext from
shower rod slide Delta
exact fit works and fits perfectly
Date published: 2018-05-02
Preguntas y respuestas
Eh?
What model is this for?
Hi Shy,
Thank you for your question! This slide mechanism is for the models 57085, 57014, and 57011.
Thanks,
Jon
Date published: 2024-03-28
What diameter bar will this fit?
I'm planning a bathroom/shower remodel, and would like to swap out the slide bar on the Delta 57014 Chrome Hand Shower Package with an ADA compliant grab bar (such as the Delta 41724 Transitional#, which is 1.25" in diameter. Will this work?
Is there a Delta #transitional style) hand shower package that includes an ADA compliant grab bar as the slide bar?
Hi Tim G,
Thank you for your question! This mechanism fits on a 3/4" bar.
If you would like a handshower mount for the 41724 grab bar you can use the U6400 slide mount, RP48769 hand shower, and a hand shower hose such as the RP64157.
http://www.deltafaucet.com/bath/details/u6400.html
http://www.deltafaucet.com/repairparts/details/rp48769.html
http://www.deltafaucet.com/bath/details/rp64157.html
Best regards,
Jon
Date published: 2024-03-28
How can I tighten the shower head holder on my slide mechanism?
I have a 57011 Series shower mount with a RP64152 slide mechanism. The holder for the shower head will not hold the shower head in place. I do not mean its place on the bar, that is easily tighten. The part that supports the shower head droops.
Hi Steve, Thank you for your question. There should be a screw that holds the hand shower mount in place located in the middle of the u-shaped cradle. Tightening this screw may solve your issue. If not the RP64152 slide mechanism will need to be replaced.
Thanks,
Dave
Date published: 2024-03-28
Is part RP64152SS under warrantee?
Thank you for your question, Alvin! All parts and finishes of this Delta slide bar are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed. Please contact us directly at the warranty department for further assistance.
https://www.deltafaucet.com/service-parts/contact-us
Best regards, Edward
Date published: 2024-03-28
The plastic piece in the center is broken
Is it possible to only replace the plastic piece in the center of this part vs. replacing the full piece for $86?
Hi, Yolanda!
Thank you for your question! The plastic piece in the center of the mount is unfortunately not available as a replacement part. We recommend purchasing RP64152RB, if it is needing to be replaced.
Best Regards,
Rosanna
Date published: 2023-05-03
How do we tighten the slide mechanism?
Just installed the 57014 wall bar hand shower unit, but can't figure out how to tighten the slide mechanism to keep the shower head from rotating right/left. Tightening the side handle only seems to affect movement up/down the bar, but doesn't keep the whole slide mechanism (and, therefore, the shower head) from turning right/left. Suggestions?
Hi, Amy. Thank you for your question.
There is not a way to tighten the mount to prevent the mount from moving side to side. The lever for the mount is only able to be tightened or loosened when you want the mount to go up or down on the slide bar.
Thanks,
Rosanna
Date published: 2024-03-28
The plastic inside the slide mechanism snapped off, after bumping it with my head. Is there any way I can get my hands on the plastic part? I have the warrantee tucked away somewhere, still hunting for it.
Hi bigfoot,
Thank you for your question about the Delta Faucet RP64152. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help!
Unfortunately, the parts of the slide mechanism are not available individually. I apologize for the inconvenience this causes. Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-11-04
As a do it your selfer- how do you even replace this piece- TIA!
Hi still learning, thank you for your interest in the RP64152!
Here is a link to the manual and instruction sheet for the hand shower slide bar:
https://media.deltafaucet.com/MandI/86512%20Rev%20C.pdf
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Themar
Digital Communications Specialist
Date published: 2023-05-06
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.