Delta®
Conjunto de bola, manija tipo palanca, acero inoxidable
N.º de modelo: RP70
Image Thumbnail, click to view zoomed product image 
CARACTERÍSTICAS DEL PRODUCTO
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
1
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 5 out of
5
by
Anonymous from
deligted to find
needed to replace this item and it was for the orginial shower facuet which may be close to 45 years old---was very happy to find the item so easily
Date published: 2011-05-21
Rated 5 out of
5
by
vonodog from
faucet ball
proper part. Easily installed.
Date published: 2010-08-14
Rated 5 out of
5
by
David114 from
Original Delta part is best
For a modest expense, the faucet works like new.
Also, it's great to have these parts available. I had earlier used an equivalent part from another manufacturer. It seemed better in some ways at first, but then the stem go a bit wiggly, making it difficult to shut off the water completely. Now with a genuine Delta part, it is working much better.
Date published: 2010-07-16
Rated 3 out of
5
by
Amateur from
Fair Replacement
Installation was easy. The dripping stopped. However, now the faucet handle has to be positioned slightly off center to shut off the flow.
Date published: 2009-01-22
Preguntas y respuestas
Does the Delta RP52833SS Delta Single Metal Lever Handle Kit (Stainless) accommodate the Delta ball rp70 shaft?
Hi, Pomar!
Thank you for your question. The Delta RP52833SS Handle Assembly will fit the Delta RP70 Ball Assembly.
Best Regards, Rosanna
Date published: 2024-03-28
i have a 175 sink faucet. which ball does it use?
Hi aldwek,
Thank you for your question. The model 175 uses an RP70 ball assembly.
Best regards,
Jon
Date published: 2024-03-28
My delta shower single handle faucet is dripping, what causes this?
Not sure of model # but has a part # 70 ball stem
I was able to use the original ball. In the rebuild kit, AT FIRST I tried the short springs, and Short washers.
This Is What happened to me, drip drip drip.
SO
I used the short springs from the kit. And the TALL WASHERS. !
Problem solved, it has been 2 weeks and NO leaks.
Date published: 2024-03-28
Should I lubricate this assembly?
Should I lubricate this before assembly? What kind of lubricant? This is for replacement in a 172-WF "Classic Single Handle Kitchen Faucet with Spray" Thank you.
Thank you for your question. It is not necessary to lubricate the RP70 before installing it into your Delta Faucet model # 172-WF.
Date published: 2024-03-28
I notice that my original RP70 ball has 4 round holes but the "#70 style" ball at the hardware store has only 3.
The 4th hole in the RP70 doesn't seem to line up with anything in the faucet. Any problem with the hardware store ball - besides not being genuine Delta?
Hi Cliffn,
Thank you for your question. We cannot recommend using any other parts in our faucets beside genuine Delta Faucet parts. It does void the warranty if you use other manufacture's parts.
Thanks.
Jody
Date published: 2024-03-28
Replacement acrylic knob
I have a shower with this ball assembly, but the knob broke and I need a replacement. The knob is pushed down to turn off, up to turn on and left/right for hot/cold. Where can I replace it...or if it's not available, what do I need to do?
Hi Colleen,
Thank you for your question. Based on your description you have a 600 series model, which would take the RP17451 knob handle. The knob handle will fit onto an RP212 ball assembly.
http://www.deltafaucet.com/repairparts/details/rp17451.html
Best regards,
Jon
Date published: 2024-03-28
Are there replacement lever handles for the RP70 ball assembly style shower valve?
If so, can you tell me a replacement part number that would work?
Hi Absco, Thank you for your feedback!
The 600 series you described has been discontinued. Currently we carry just the RP17443 lever for the 600 series.
Best regards,
Brandis
Date published: 2024-03-28
Is there more than one type of ball used in Delta single handle kitchen faucets? I have 400 with sprayer, installed in 1990's. Most recently put in kit with #70 ball, now won't quite shut off all the way. Old ball had extra hole not in #70.
Hello Dennis,
Thank you for your inquiry! Yes, the ball assembly RP70 was the only ball manufactured for our older Delta single handle kitchen faucets. If your faucet is leaking, you would need to replace the RP4993 seats/springs.
https://media.deltafaucet.com/PartsDiagram/100_400_70701__Rev_B.pdf
Best regards,
Tanya
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.