Perilla de temperatura y cubierta - Serie 17 en cromado
N.º de modelo: RP75440
Image Thumbnail, click to view zoomed product image 
CARACTERÍSTICAS DEL PRODUCTO
Technology and Special Features
Cumplimiento con la ADA
Cumplimiento con la ADA
Algunas personas y códigos locales requieren que los artefactos cumplan con la Ley para estadounidenses con discapacidades (Americans with Disabilities Act). Si es posible que reciba visitas de personas con capacidades especiales o si cree que sus futuros clientes podrían apreciar esta función, Delta ofrece diversos artefactos que cumplen con esta ley.
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
1 5/8
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 1 out of
5
by
bob27 from
Poorly designed - plastic. Perhaps a solution
I read some of the reviews on here (it has a 1.1 rating which perhaps would be lower if you did not have to at least put a 1 star rating). I read about the plastic having advantages of corrosion. heat transfer, etc. My suggestion to Delta would be to add a screw-type feature that would allow people to tighten/loosen as needed, yet would allow the unit to have easy on/off rather than pressure on/off (which makes it susceptible to the tab-breaking everyone seems to complain about). This screw could be stainless steel (rust issue solved), small enough (no great amount of heat transfer), ease of installation/removal for people.
Here's hoping :)
Date published: 2024-07-04
Rated 1 out of
5
by
ken h from
cheap plastic, misleading descriptions
i asked several time what the knob is made of and they told me metal and plastic, then i got it and it broke. garbage!
Date published: 2024-05-16
Rated 2 out of
5
by
Lgc2 from
Easily breaks
Lasted two years and broke after that . We replaced and the snaps broke again. I don’t want to replace the entire thing but I may have to :(
Date published: 2024-01-02
Rated 1 out of
5
by
Greg from
Broken plastic tab
As others have noted, this part is a weak plastic formulation. The tab broke when attempting to "snap" it on. Mosco Canada stated "This is not a warranty issue" and suggested that I go and buy a replacement at a hardware store. It clearly SHOULD BE under warranty. I am not impressed.
Date published: 2023-12-22
Rated 1 out of
5
by
Sarah from
Just installed and knob tab broke
Well... a $450 valve kit made of plastic parts that don't hold up. The quality is very poor and I can't believe it is plastic instead of metal. I am leaving Delta and moving to Moen.
Date published: 2023-12-20
Rated 1 out of
5
by
RickQ66 from
Disappointed
We are at the tail end of a major bathroom renovation and have been very excited about our new Delta shower with wall jets. As we are getting ready for the final stages to have this shower up and running the temperature control knob broke easily during installation. I had to go online and order another with expedited shipping so that our subcontractors could finish. I was surprised to see that this was a common customer experience and hope Delta is taking steps to insure that this part is sturdier in the future given the expense of the overall shower system.
Date published: 2023-12-04
Rated 1 out of
5
by
junbug0024 from
Tab is too easily broken!!
Just installed the Arm shower with 6 way diverter, everything is great except for this one piece. The tab is too easily broken on this. Just putting it on exactly how the instructions say to install it will cause it to break! Delta needs to design a change and make the tab a little more robust.
Date published: 2022-10-05
Rated 1 out of
5
by
Disappointed from
Poor design
We bought a Delta shower column and faucet. When it was all installed we attempted to put on the temperature knob and cover and they don't fit together. On top of that, they are plastic. We thought we were buying a quality product. Very Disappointed!!!
Date published: 2022-04-22
Preguntas y respuestas
how do i install this cap
I've broken two and do not want to break another one how do you install this cap?
Hi Lisa,
Thank you for your question. To install the temperature cap and knob; secure temperature control knob with screw and then hook front of temperature control cover onto knob before engaging rear snap.
Best Regards,
Courtney
Date published: 2024-03-28
what is the number on the inside of the cap? I ordered one of these before and it was wrong.
Hi, Shari!
Thank you for your question. The Delta RP75440 Temperature Knob and Cover includes both inside of cap and cap, itself.
Best Regards, Rosanna
Date published: 2024-03-28
I also need to remove a temp control cover on a brand new faucet. I thought I could put the cover on temporary & then go back and finish job and finish the installation later. Where exactly do I pry since the tab is hidden & what is "tip" in A2?
Thank you for your question, Crusher! We recommend prying the temperature knob cover up from the back side of the knob or opposite side of the lever. Please contact us if you have questions or need further assistance.
https://media.deltafaucet.com/MandI/76652%20Rev.%20G.pdf
Best regards, Edward
Date published: 2024-03-28
How do you remove this cap to adjust the temperature.
I am afraid to break the plastic hook or snap
Hi Abby,
Thank you for your question. If you need to remove the handle or adjust the Rotational Limit Stop, remove the cover by prying it off at the tip. The finished cover simply snaps onto the knob.
Best regards,
Jon
Date published: 2016-12-19
Does this fit model T17267-SS trim?
Hello Alan1960,
Thank you for your question! This temperature knob is the correct part for the model T17267-SS. Here is a link to the parts diagram for this model for reference:
https://media.deltafaucet.com/PartsDiagram/DPD-B-T17067_B.pdf
Best regards, Jon
Date published: 2024-03-28
How do I take the dial off to adjust temp dial?
Hello MArk k,
Thank you for your question! I am happy to help you!
The Delta Temp knob RP75440 is removed by grabbing the wider part of the handle and popping it off. The knob is snapped onto the temperature control.
Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
I have a Dyson bathtub faucet. And an RP46463 dual control valve cartridge. My temperature knob feels loose or wobbly. It appears to be snapped all the way on. Is there a replacement for the temp knob? Dyson or universal?
Hi NerkAl,
Thank you for your question about the Delta Faucet RP75440SS.
A replacement temperature knob for a 17 series Dryden bathtub faucet is RP52147.
https://www.deltafaucet.com/parts/product/RP52147.html
See the parts diagram here for more information:
https://media.deltafaucet.com/PartsDiagram/DPD-B-T17051_B.pdf
Please reach out for further assistance or with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-02-08
I currently have a Dryden temperature control knob, RP52147. Can it be replaced with ARA RP75440SS? Are they interchangeable? Thank you.
Hi NerkAl!
Thank you for your question and we are happy to help. The RP52147 cannot be replaced with the RP75440SS. With any further questions or concerns, please do not hesitate to reach out to us again.
Best Regards,
Carrie
Date published: 2024-02-09
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.