Wand Assembly - Pull-Out in Spotshield Stainless

Hi Adam25, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. The Delta Faucet Valdosta® Wand Assembly - Pull-Out In Spotshield Stainless MODEL#: RP82123SP can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello RMichael! Thank you for your question! I am happy to help. The Delta 16957-SPSD-DST has a wand assembly that can't be removed from the hose. Please reach out to us directly if you need further assistance. Best Regards, Antoine

Hello John Mc, I am sorry that you are experiencing a leak from the wand connection of your pull-out hose on your Delta Faucet Single Handle Pull-Out Kitchen Faucet With Soap Dispenser, model 16957-SPSD-DST; however, I am happy to assist you. Yes, the Delta Faucet Wand Assembly - Pull-Out, model RP82123SP, is available. We recommend flushing your unit first before replacing any parts as there can be debris trapped somewhere, which could cause this leak. Wand Assembly: Model RP82123SP – https://www.deltafaucet.com/parts/product/RP82123SP.html To flush the unit, we recommend the following process — Let's start with the easy steps: Remove your aerator or hose to check the flow through the unit without that part installed. Please disconnect the hose from underneath the sink. The wand on this model does not detach from the hose. To disconnect the hose, pull straight down after removing the blue clip. You may have to use a bit of force to remove the hose. If the flow is good, the piece you have removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Checking the supply lines for debris: Shut off the valves to both the hot and cold-water lines. Next, turn the faucet handle to the on position and allow it to bleed the lines of any excess water. Now, disconnect the hot water supply line and place it inside of a bucket. When the line is positioned securely into the bucket, turn on the cold-water supply. Parts Diagram: Model 16957-SD-DST – https://media.deltafaucet.com/PartsDiagram/DPD-K-16957-SD-DST.pdf Thank you for being a loyal Delta Faucet customer. Please contact us with any questions or for further assistance. Best Regards, Emma

Hi Frank, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet Delta Valdosta® Wand Assembly - Pull-Out In Spotshield Stainless MODEL#: RP82123SP is the correct spray assembly for model 16957-SPSD-SST. Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist