Single Handle Bathroom Faucet in Lumicoat® Polished Nickel

Hi, Thank you for contacting us. I am sorry to hear there is an issue with your faucet and we are more than happy to assist you. We always recommend a flush before installing a faucet as this will remove potential debris before it can enter our units. To ensure this is resolved fully we would like to go over a few potential causes.The issue that you have described is usually caused by a debris blockage in the lines. To locate that blockage you would need to flush out the valve body. To flush out the valve body, first remove the aerator or wand and turn off the water supply to the unit. It is helpful to use a chip clip or clothespin to prevent the hose from retracting into the spout. Remove the handle and cartridge. Inspect the bottom of the cartridge for debris and rinse this off carefully so as not to loose the orange or blue gasket. You will need to turn the water on just a little bit from out of the handle area to ensure no debris has fallen into the lines under the cartridge. Next, place a pitcher or bucket upside down over the open valve and turn the water back on full strength for 30 to 45 seconds. After the allotted time, turn the water off and reinstall the components. Please contact us if you have any further questions or if you need further assistance you may call us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your cooperation. Best regards, Bethany

Hello Taimone, Thank you for your question. The threaded portion of the flange is 1 3/8" and the top surface diameter is 2 1/8". This assembly should work with a 1 3/4" diameter drain. However, the depth of the hole must be 1 5/8" to 2 3/8". https://media.deltafaucet.com/SpecSheet/DSP-L-599-MPU-DST%20Rev%20C.pdf Best regards, Tanya

Hi, Mandy! Thank you for your question. The 599-MPU-DST will be available Quarter 4 of 2017. Best Regards, Rosanna

Thank you for your question, Karen2237! Model 599-MPU-DST is a WaterSense® Labeled faucet designed to produce 1.20 gpm @ 60 psi. We would recommend checking the PSI to the home as well as the Stream Straightner, Flow Restrictor, and Filter Adapter for any sediment that could be lowing this flow rate. Please feel free to contact us directly if you have questions or need further assistance. https://media.deltafaucet.com/PartsDiagram/DPD-L-599-LPU-DST_C.pdf Best regards, Edward

Hi, Patty! Thank you for your question. The Delta 599-BLMPU-DST Faucet requires a holes size of 1 1/8" to 1 1/2" (29 mm to 38 mm). Best Regards, Rosanna

Thank you for your question, Corine! Model 599-SSMPU-DST is a WaterSense labeled faucet designed to produce 1.20 gpm @ 60 psi, however if you are not getting this flow rate, removing and checking the aerator and flow restrictor for debris buildup should help. If not, please feel free to contact us directly for further assistance. https://media.deltafaucet.com/PartsDiagram/DPD-L-599-LPU-DST_C.pdf Best regards, Edward

Hi, Phil! Thank you for your question. The Delta 599-KSMPU-DST Faucet in the Black Stainless Finish will be available Quarter 1 of 2020. Dates can be subject to change. Best Regards, Rosanna

Thank you for your inquiry, Doug_321! Yes, the Delta Pivotal Lavatory 599-MPU-DST faucet does come with a metal drain/pop-up assembly. https://media.deltafaucet.com/PartsDiagram/DPD-L-599-LPU-DST.pdf Best regards, Tanya