Trinsic®

Llave para bañera de montaje en piso; conjunto interior con topes

Name: Floor Mount Tub Filler - Rough with Stops
Brand: Delta
SKU: R4700-FLWS
Price: 453.75 USD
Rating: 5 (4 reviews)

N.º de modelo: R4700-FLWS

Llave para bañera de montaje en piso; conjunto interior con topes

Haga clic para girar

Llave de llenado para bañera para montaje en piso, conjunto interior con topes, imagen 1

Llave de llenado para bañera de montaje en piso - Conjunto interior con topes, imagen 2

IMPRIMIR

Agregar a favoritos

Busque instaladores locales de Delta®

Trinsic®

Llave para bañera de montaje en piso; conjunto interior con topes

N.º de modelo: R4700-FLWS

Precio de lista: $453⁷⁵

IMPRIMIR

Agregar a favoritos

Busque instaladores locales de Delta®

CARACTERÍSTICAS DEL PRODUCTO

Este juego de tubería interna puede instalarse antes de elegir la terminación y el acabado específicos. Permite continuar sin demoras con la construcción o con un proyecto de renovación al delimitar un estilo de diseño. El juego de accesorios se vende por separado y se requiere para completar la unidad. Ahorre tiempo, esfuerzo y dinero en futuras actualizaciones por renovación porque no es necesario modificar la plomería detrás de la pared.

Juego de tubería interna únicamente
Debe comprarse el juego de accesorios para completar la unidad.
Cuerpo de latón mecanizado con placa de montaje de acero inoxidable.
El cartucho se envía con los accesorios
Tubería interna soldada de 1/2".
El producto se envía con tapones de prueba y protector de enlucido.
WS = con topes

Información especial

ADVERTENCIA de la Proposición 65 de California

Documentos y especificaciones

Soporte para productos, repuestos y especificaciones técnicas

Ver especificaciones técnicas

Ver hoja de mantenimiento e instalación

Ver diagrama de repuestos y accesorios

Registrar su producto

Información de instalación

Altura total:

Voltaje:

Tipo de válvula:

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Explorar videos

Logotipo de Bilt Intelligent Instructions horizontal

Instalación simplificada. Descargue la aplicación BILT sin cargo para acceder a instrucciones paso a paso interactivas en 3D.

LISTA DE PIEZAS

Trinsic®

Trinsic® Tapón de prueba - Llave de llenado para bañera de montaje en piso

Precio de lista: $15.00

Precio en línea: $12.00

Envíos sin cargo para todos los pedidos de más de $49

Acabados estándar

RP74816

Trinsic®

Trinsic® Juntas tóricas - Tubos de conjunto interior

Precio de lista: $9.50

Precio en línea: $7.60

Envíos sin cargo para todos los pedidos de más de $49

Acabados estándar

RP74812

Delta®

Delta® Conjunto de vástago con juntas tóricas y tuercas

Precio de lista: $24.75

Precio en línea: $19.80

Envíos sin cargo para todos los pedidos de más de $49

Acabados estándar

RP50366

RESEÑAS

Rated 5 out of 5 by Guy M from Well made and heavy duty Heavy duty, well made, and quality to last. This was my second time purchasing this unit. A little tricky on the first install but the second install went without a hitch. Would buy again.

Date published: 2023-02-24

Rated 5 out of 5 by Chris from Tub Filler Rough Use the inside of the metal template when marking out you tile or finish flooring.

Date published: 2021-02-14

Rated 5 out of 5 by Purple Mom from Fantastic support! I contacted Delta Customer Service about a leaking faucet. The agent was knowledgeable and efficient. My parts were shipped immediately! They honor their Lifetime Warranty!

Date published: 2020-07-21

Rated 5 out of 5 by Fontconst from Delta Freestanding Tub Filler Rough-in Valve with Stops. If your interested in local building codes... [This review was collected as part of a promotion.] As far as I know, this delta freestanding rough-in valve is the most cost effective way to meet plumbing codes where I'm from, which require you to have a shut off for all inaccessible valves. I use it in concrete floors and it works like a charm. Just make sure the copper is completely protected from the concrete. Their tub fillers are all thermostatic as well, so you don't have to worry when the inspector comes. As long as its level, and you have adequate setbacks from the wall and tub, installation should be a small feat for any professional. Heavy and beautiful, highly recommend.

Date published: 2018-02-07

Preguntas y respuestas

Hi, I am wondering what is the difference between the r4700-fl vs r4700-flws

Asked by: ejvv

Thank you for your question, ejvv! The model R4700-FLWS has supply shut offs, which allow you to turn the water off directly at the valve during installation of the trim or repair. It also has 1/2" NPT female inlets, whereas the R4700-FL has 1/2” sweat connections. Best regards, Jon

Answered by: Delta Faucet

Date published: 2024-03-28

what is the tub filler flow rate

Asked by: Rick

Hi Rick, Thank you for your question! The tub filler should run at least 6 gallons per minute at 60 PSI. However, the exact flow rate will be determined by the trim kit that you use. Please refer to the Technical Specifications under the "Documents and Specs" tab on the product page for the trim kit you will be using. Best regards, Jon

Answered by: DeltaFaucet3

Date published: 2016-11-14

What size and thread type are the 4 mounting screws

Asked by: Zac

Hi Zac, Thank you for your question. The subfloor mounting screw threads are a #8-15 x 1.25". The trim mounting bolts come in 2 different lengths, 1/4-20 x 2.32" and 3.70". Thanks, Jon

Answered by: DeltaFaucet3

Date published: 2021-01-27

will the R4700-FLWS floor valve work with a Senlesen floor tub faucet?

Asked by: Helms

Thank you for your question, Helms! We can not guarantee a faucet from another manufacturer would be able to fit over the Delta R4700-FLWS rough in kit. Best Regards, Benjamin

Answered by: Delta Faucet

Date published: 2024-03-28

I see from the instructions that it is mounted with the plasterguard in place. Cut it off when installing filler?

It is attached the the rough so I was wondering if it stays on and I cut it off when installing the filler trim.

Asked by: Archie

Yes, right before you install the trim, cut off the plastic shield even with the floor. I used a utility knife and it cut fairly easy. Hope this helps, Jim

Answered by: Jim62

Date published: 2024-03-28

is this valve temperature and pressure balanced?

Asked by: Darin 3

Hi, Darin 3! Thank you for your question. The valve cartridge assembly that is included with the Delta Floor Mount Tub Filler for the Delta R4700-FLWS Rough Valve Body is pressure balanced. Best Regards, Rosanna

Answered by: Delta Faucet

Date published: 2024-03-28

What's the easiest way to mount it in cement?

Asked by: Steve

Thank you for your question, Steve! Information on installing this rough-in valve in concrete can be found on page 4 of the Maintenance and Installation manual below. https://media.deltafaucet.com/MandI/X00076944_C.pdf Best regards, Edward

Answered by: Delta Faucet

Date published: 2024-03-28

Hot Water Adjustment

We have the R4700-FLWS with stops and there is not enough hot water. Can the faucet be adjusted to increase the hot water?

Asked by: Greg

Thank you for your question, Greg. Some Tub Filler trims have a Rotational Limit Stop. Please refer to page 7 of the instructions linked below. Please also make sure that the supply stop on the hot side is fully open. https://media.deltafaucet.com/MandI/74820%20Rev%20D.pdf Best regards, Jon

Answered by: DeltaFaucet3

Date published: 2016-11-29