Foundations®
Tubo de salida para bañera - Desviador con tirador hacia arriba en cromado
N.º de modelo: RP64721
Image Thumbnail, click to view zoomed product image 
Documentos y especificaciones
Información de instalación
Altura total:
2 11/16
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 1 out of
5
by
Cmak cpa from
Blah delta tub faucet I returned
Not what I was looking for-no aerator and a cheap gate mechanism inside rather than a push-pull design (not talking about the thing you see).
Date published: 2022-10-30
Rated 5 out of
5
by
mimi2 from
Exactly the color I was looking for
Had to do small adjustment with inner fittings but works great and looks very good!
Date published: 2022-01-11
Rated 1 out of
5
by
Mrsm from
Help, Delta or Build.com?
This was just installed and after two showers, there are water stains that won't come off.
Date published: 2021-06-17
Rated 5 out of
5
by
NLucido from
Great Buy
[This review was collected as part of a promotion.] This was the best purchase and just what we were looking for. Couldn't fine this in any big box stores in our area but found it on this site. Contractor put a tub spout in that was too short so Build.com had what we needed. Can't go wrong. Thanks
Date published: 2018-02-03
Rated 5 out of
5
by
Cheryl from
Classy and solid brass
[This review was collected as part of a promotion.] I wanted solid brass and this faucet is a tremendous value. I bought a long one so that if you want to wash your hair under the faucet, it would reach out far enough for you to stick your head under it. We are very happy with it
Date published: 2016-12-07
Rated 5 out of
5
by
Bobbie from
I was just what I wanted
[This review was collected as part of a promotion.] This spout was just perfect. It arrived very quickly and the spout was easy to order from the web site
Date published: 2016-09-13
Preguntas y respuestas
Installing a new RP64721 spout. How long should my cooer pipe be cut from the tile?
Thank you for your question, tracy79! When installing the RP64721 slip-on tub spout, the tubing should be cut 1 ½ – 2 ¾” from the finished wall.
https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf
Best regards, Edward
Date published: 2024-03-28
I need a tub spout with a diverter where the pipe extends 5-6 inches from the wall and is threaded at the nose
Hi pastor,
Thank you for your question! Unfortunately, our tub spouts that thread into the nose require a pipe that is 3 7/8 – 4” in length.
Best regards,
Jon
Date published: 2024-03-28
Will this screw onto a 1 inch threaded adaptor? Does it screw on at the base?
Prli,
Thank you for your question. This faucet can slip onto 1/2" copper pipe or thread onto 1/2" IPS. It does not use a 1" adapter.
Best regards,
Jon
Date published: 2024-03-28
Sweat On Installation
How far from the wall does the copper tubing need to protrude?
Thanks
Hi kbh33, Thank you for your question. When installing the RP64721 slip-on tub spout, the tubing should be cut 1 ½ – 2 ¾” from the finished wall.
Thanks,
Dave
Date published: 2024-03-28
is this metal or plastic/acrylic?
Thank you for your question, Caroline! The RP64721 tub spout is metallic.
Best regards, Edward
Date published: 2024-03-28
I need installation instructions for RP64721 tub spout deverter
Here's the deal, just bought kit #B114900. States to use install instructions with tub spout. THERE ARE NONE!! It is Sunday, and I can't even download a set of instructions. I am very unhappy and cannot believe There are no install instructions to be found!!!
Thank you for your question. We apologize that your tub spout did not include the instructions. They should have been on the bag itself. Included here are the instructions for installing a typical 1300/1400 series faucet. Your spout is a slip-on spout for a 1/2" copper pipe and also has a removalble threaded adapter for a 1/2" iron pipe. Your instructions are on page 7.
http://www.deltafaucet.com/customersupport/documentation/t13420.html?document=mi&documentIndex=0&proUser=true#flashWrapper
Date published: 2024-03-28
I also did not receive instructions for the RP64721 spout which came in the B114900-SS kit. How long should the copper pipe extend from the wall?
According to Delta customer service I called on 8/23/17 copper stub out is 1/4" to 1/2" I have used this product some years ago ,do not recall stub out being so short. Have always had good results with this spout
Date published: 2024-03-28
I purchased the BT13410-SS trim which comes with this faucet. Everything has been a perfect match to replace the old parts of the Model #1348 except for the faucet (old RP5834). It will not slip or screw onto the old adapter attached to the copper pipe.
I'm sorry for any inconvenience, AnniBee82. Unfortunately, it will not work with the adapter for the RP5834 tub spout. However, you can reuse the RP5834 or purchase any model that includes the RP12307 adapter.
The RP64721 spout will slip onto 1/2" copper piping that extends 1 1/4” to 1 1/2” from the finished wall. The slip-on adapter can be removed to allow it to thread into a 1/2" nipple that extends 3 7/8" - 4" from the wall.
Best regards, Jon
Date published: 2024-03-28
PRODUCTOS RELACIONADOS
Ver colección
View Product
![Image-Master-BT13410]()
Foundations®
Foundations® Accesorios de ducha y bañera Monitor® serie 13
Precio de lista: $124.15 - $152.30
Acabados estándar
BT13410
View Product
![Image-Master-B510LF-PPU-12]()
Solo en Home Depot
Foundations®
Foundations® Llave para baño de combinación de una manija
Precio de lista: $86.55 - $143.85
Acabados estándar
B510LF-PPU-12
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.