Accesorios de ducha y bañera Monitor® serie 13 en cromado

N.º de modelo: BT13410
Accesorios de ducha y bañera Monitor® serie 13 en cromado
N.º de modelo: BT13410
Precio de lista: $12415
CARACTERÍSTICAS DEL PRODUCTO
La válvula de equilibrio de presión Monitor® mantiene la temperatura del agua a valores seguros dentro de los ±3.6 °F (±2.0 °C), y esto le protege de cambios repentinos en la presión del agua caliente o fría
  • Funciones de rociado: Rociado completo y rociado suave
  • El rociado completo ofrece una cobertura total constante, ideal para todas las necesidades a la hora de ducharse, desde enjuagar el champú del cabello hasta relajar los músculos cansados
  • El tubo de salida para bañera con tirador desvía el agua del tubo de salida para bañera al cabezal de ducha
  • Kit de accesorios únicamente; se debe pedir el conjunto interior de válvula universal MultiChoice® (serie R10000) por separado para completar la unidad
  • El kit de extensión de vástago RP77991 puede pedirse para un espesor de pared con 1 3/4 pulgadas adicionales
  • Capacidad de instalación dorso contra dorso
  • Las regaderas con clasificación WaterSense® usan al menos 20 % menos agua que los productos estándar de la industria sin sacrificar desempeño
  • Cumple con la ADA.
  • Con el respaldo de la garantía limitada de por vida de Delta Faucet
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
Ecológica
Con etiqueta WaterSense®
Tecnología
Características especiales
Cumplimiento con la ADA
Uso eficiente del agua
Documentos y especificaciones
Información de instalación
Altura total:
11 31/32
Voltaje:
0
Caudal:
1.75 gpm a 80 psi, 6.6 l/min. a 552 kPa
Tipo de válvula:
Cartucho con equilibrio de presión de función única

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Aplicación Delta BiLT
Logotipo de Bilt Intelligent Instructions horizontal

Instalación simplificada. Descargue la aplicación BILT sin cargo para acceder a instrucciones paso a paso interactivas en 3D.

LISTA DE PIEZAS

LISTA DE PIEZAS

Solo en minoristas en línea
Solo en minoristas en línea
Image-BT14496 Secondary Image-BT14496
Solo en minoristas en línea

Windemere®

Windemere® Accesorios de ducha y bañera Monitor® serie 14

Precio de lista: $172.30
Acabados estándar

BT14496

4.42 26
Image-R10000-PXWS Secondary Image-R10000-PXWS

Delta®

Delta® Conjunto interior de válvula universal MultiChoice® para ducha/bañera - Engarce de PEX

Precio de lista: $103.50
Acabados estándar

R10000-PXWS

4.88 8
Image-RP64772 Secondary Image-RP64772

Talbott™

Talbott™ Conjunto de unidad de vástago, asiento y resorte, tuerca cubierta y arandela

Precio de lista: $35.75
Precio en línea: $28.60
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP64772

Image-R10000-IP Secondary Image-R10000-IP

Delta®

Delta® Conjunto interior de válvula universal MultiChoice® para ducha/bañera - Entradas/salidas IPS

Precio de lista: $70.95
Acabados estándar

R10000-IP

4.42 24
Solo en minoristas en línea
Solo en minoristas en línea
Image-BT14296 Secondary Image-BT14296
Solo en minoristas en línea

Windemere®

Windemere® Accesorios de ducha Monitor® serie 14

Precio de lista: $145.45
Acabados estándar

BT14296

3.80 20
Image-Master-RP64721

Foundations®

Foundations® Tubo de salida para bañera - Desviador con tirador hacia arriba

Precio de lista: $64.95 - $97.10
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP64721

Discontinuado
Discontinuado
Image-B2312LF Secondary Image-B2312LF
Discontinuado

Foundations®

Foundations® Llave para cocina de dos manijas

Precio de lista: $90.80
Acabados estándar

B2312LF

5.00 2
Image-RP29569

Delta®

Delta® Espaciador

Precio de lista: $4.05
Precio en línea: $3.24
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP29569

5.00 1
Image-B2512LF Secondary Image-B2512LF

Foundations®

Foundations® Llave para baño de combinación de dos manijas

Precio de lista: $126.10
Acabados estándar

B2512LF

4.67 3
Image-R10000-UNBX Secondary Image-R10000-UNBX

Delta®

Delta® Conjunto interior de válvula universal MultiChoice® para ducha/bañera - Entradas/salidas universales

Precio de lista: $69.55

R10000-UNBX

4.56 276
Image-B2310LF Secondary Image-B2310LF

Foundations®

Foundations® Llave para cocina de dos manijas

Precio de lista: $120.85
Acabados estándar

B2310LF

4.75 8
Image-B4410LF Secondary Image-B4410LF

Foundations®

Foundations® Llave para cocina de una manija con rociador

Precio de lista: $146.30
Acabados estándar

B4410LF

3.76 152
Solo en minoristas en línea
Solo en minoristas en línea
Image-B3596LF Secondary Image-B3596LF
Solo en minoristas en línea

Windemere®

Windemere® Llave para baño de extensión de dos manijas

Precio de lista: $265.40
Acabados estándar

B3596LF

4.08 93
Image-R10000-UN

Delta®

Delta® Conjunto interior de válvula universal MultiChoice® para ducha/bañera - Entradas/salidas universales

Precio de lista: $70.95

R10000-UN

4.56 276
Image-Master-RP64722

Foundations®

Foundations® Tubo de salida para bañera - Sin desviador

Precio de lista: $59.85 - $89.50
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP64722

Image-RP6023 Secondary Image-RP6023

Delta®

Delta® Brazo de ducha

Precio de lista: $36.50
Precio en línea: $29.20
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP6023

4.57 7
RESEÑAS
Rated 3 out of 5 by from - tub spout does not tighten completely.
Date published: 2023-08-18
Rated 3 out of 5 by from Handle falls off We bought this set up for our bathrooms. Everything was easy to install and hook up aside for the knob to turn water on and off. It falls off after tightening down
Date published: 2022-05-31
Rated 2 out of 5 by from It works It works i just don't like how loose the on off part is. It feels like it could come off in my hands at any time. It feels like it is cheaply made.
Date published: 2022-03-25
Rated 5 out of 5 by from Some install I bought this about 2 weeks ago and it was probably the easiest one I've ever installed and works like it should my water pressure is a tad bit lower now but it's okay
Date published: 2021-04-18
Rated 2 out of 5 by from broken valve cartridge I have bought 2 sets of the one handle bath faucets Model Number B114915C . The valve cartridge has broken on the 2nd set as well. Last time I was sent a cartridge for free to repair. I need another one for this set. Too expensive to be replacing this often and a pain!
Date published: 2020-06-25
Rated 4 out of 5 by from HAD 2 REPLACE IT SO THE PLUMBER SAID 2 GET A DELTA SO FAR SO GOOD. I HAD 2 GET A REPLACEMENT FOR MY OTHER MODEL. THE PLUMBER SAID THAT DELTA STANDS BEHIND THEIR PRODUCTS
Date published: 2020-05-31
Rated 1 out of 5 by from Pretty but not functional I purchased 3 of these for a new construction, each one has had a problem. For the bath shower combo the the water is not separated. Water flows out of the top and bottom. Have no idea how to make this stop. Seems like they would be set up to work without adjusting. Very dissatisfied with this delay on the job.
Date published: 2020-05-03
Rated 5 out of 5 by from Delta Foundations [This review was collected as part of a promotion.] Great product! Delta makes a reliable product!
Date published: 2019-11-18
  • y_2024, m_5, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_37
  • loc_en_US, sid_BT13410, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Preguntas y respuestas

Can I use this trim with the #58470 in2ition h2okinetic shower/handshower?

Asked by: SCmom
Hi SCmom, Thank you for your question. You sure can! Any Delta shower head will work with this trim. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

I have the delta tub and shower B114900. I am trying to install the tub spout onto a 1/2" copper pipe that is 4" from my wall. It will not push flush to the wall. There is a 3/4" gap. Do I need to cut the copper pipe to 3 1/4"?

Asked by: dbrinton
Dbrinton, Thank you for your question. For a slip-on installation, the pipe should extend 1-1/2" to 2-3/4” from the finished wall. Threaded installations require a 3-7/8" to 4” pipe. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Do all shower/bath faucet kits come with the cartridge to insert in the Delta Multichoice rough-in?

Asked by: chad
Hi, Chad! Thank you for your question. All of our Delta Shower Bath Trim Kits do include the needed valve cartridge assembly to install with the trim and valve body. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Does this kit come with the cartridge?

Asked by: naldo8552
Thank you for your question, naldo8552! Yes, this trim kit includes the cartridge assembly. The R10000 rough-in valve is sold separately. Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

Can I weld my copper pipe inside the manifold

Asked by: Chris
Hi, Chris. Thank you for your question. We do not recommend welding the copper pipe inside the manifold for the Delta B114915C Tub and Shower Unit. We recommend reading the instructions before installing. Here is a link to the Maintenance & Installation Sheet for the faucet: https://media.deltafaucet.com/MandI/101650%20Rev%20B.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Does the cartridge come with it. If not, which cartridge ?

Asked by: Phyllis
Hi, Phyllis! Thank you for your question. The Delta B114915C does include the RP70538 Valve Cartridge Assembly. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

I have a BT13410-ss and am looking for a large escutcheon plate that would match. The plate needs to be a minimum of 10"X 6.5" Any recommendations?

Asked by: Sandy
Hi, Sandy! Thank you for your question. We do have a renovation plate that matches the Brilliance Stainless Steel Finish on the Delta Monitor BT13410-SS Tub and Shower Trim Kit. The part number is RP29827SS. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP29827SS Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Finish

I would like to get polished brass finish trim for my B114900 tub/shower faucet. I recently had to replace an older Delta tub/shower faucet with the B114900 (at the last minute due to faucet failure) and want the new faucet to match the remaining hardware in the bathroom. Is there a polished brass trim kit or other solution available?
Asked by: Doug
Thank you for your question. Delta Faucet model # B114900 is only available in Chrome. If you would like to switch to the Polished Brass finish, you will need to switch out the valve to an R10000-UNBX and then pick a trim that matches what you would like.
Answered by: Delta
Date published: 2024-03-28
  • y_2024, m_5, d_18, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_67
  • loc_en_US, sid_BT13410, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 8ms
  • questions, product
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.