Tubo de salida para bañera - Desviador con tirador hacia arriba en cromado

Hello Jay1755, Thank you for your question. There are a few tub spouts that are a little longer than the Delta RP64721 (7"). RP34357 - 7 1/2" long RP38450 - 7 5/8" long RP61269- 7 1/2" long RP72565- 7 2/3" long RP75435- 7 1/10" long RP90158- 9" long Best regards, Tanya

Thank you for your question, 67Cougar! Many of our Delta tub spouts work with this RP12703 adapter, such as the RP51303, RP34357, RP52148, etc. Please click the link below to browse our selection of tub spouts. On the product details page it will list the installation type. If the spout works with this adapter, the "Product Features & Benefits" tab show that it can "Sweat onto 1/2″ C.W.T." and "Thread onto 1/2″ IPS". http://www.deltafaucet.com/bath/showering-components/filter-results.html?sort=pricehighlow&type=type-showercomp-tubspouts&function=bath-showering-components&page=2&count=15 Best regards, Tanya

Thank you for your question, Mpool! Unfortunately we do not currently offer a longer tub spout in this finish. The RP64721 spout will slip onto 1/2" copper piping that extends 1 1/4” to 1 1/2” from the finished wall. The slip-on adapter can be removed to allow it to thread into a 1/2" nipple that extends 3 7/8"- 4" from the wall. Silicone sealant may be used where the base meets the wall if there is still a slight gap. Best regards, Edward

Thank you for your question, dumber 55! This tub spout can either be installed as a slip-on to 1/2" copper pipe and held on with a set screw or threaded directly onto 1/2" IPS. The spout includes a threaded adapter however this can be removed if it is not needed. Further information on installing this tub spout can be found in the Maintenance and Installation manual on page 5. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best regards, Edward

Hi Hiedi, Thank you for your question. The RP63157OB is our diverter tub spout in oil rubbed bronze that is threaded in the nose to screw onto 1/2" pipe threads. Thanks, Dave

Thank you for your question, Ryan67! This tub spout is 7" in length. Best regards, Tanya

Hi LR, Thank you for your question! The RP64721SS will not work on your current pipe. When installing this slip-on tub spout, the tubing should be cut 1 ½ – 2 ¾” from the finished wall with a tubing cutter. We do not have an available tub spout in the Brushed Stainless Steel finish that would attached to your 3 7/8 pipe. Best regards, Brandis

Thank you for your question, Roger1! RP64721SS is made of a Brass construction. Best regards, Edward

Thank you for your question, eric93. The insert will unscrew from the tub spout near the front for a threaded connection. Please ensure that the insert is fully threaded into the spout (but avoid over-tightening) before tightening the set screw. We also recommend using a thin bead of silicone between the spout and wall to help secure it as well. Best regards, Jon

So, the answer is no. Is there a stainless tub spout with a diverter that will fit this connection? I would rather not cut holes in walls and re-pipe. Just want to go from the old brass to Stainless. I was able to change everything else easily. The info on the site was misleading as it indicated that it would fit all three types of pipe...

Hi, Scott! Thank you for your question. The Delta RP64721SS Diverter Tub Spout Assembly measures 2 15/32" (62 mm) at the base where the unit meets the wall. Best Regards, Rosanna

Dear Dave, Thank you for your question. The Delta Tub spout RP64721SS can either be used on as a slip on spout to a 1/2" copper pipe or it has a removable threaded adapter for the 1/2" iron pipe installation. Best regards, Tanya

Hi Chris, Thank you for your question. The part in the photo appears to be an older version of our RP12307 adapter. The RP17453SS or the RP19820SS will work with this adapter. The RP19820SS has a different adapter, but will work with the RP12307. http://www.deltafaucet.com/repairparts/details/rp12307.html http://www.deltafaucet.com/bath/details/rp17453ss.html http://www.deltafaucet.com/bath/details/rp19820ss.html?showPhotoGallery=false Thanks, Jon

Hi Kate, Thank you for your question.Most likely, you are experiencing "shower-rise" where the water can’t get out of the spout as fast as it flows through the valve. This causes the water to back up and come out the shower head. There can be one of several reasons for this: The valve could be upside down The length from the valve to the tub spout is outside of the 8" to 18" rule There is more than one 90-degree angle Something other than copper or galvanized pipe was used going to the spout The most common reason is that there is something restricting the water flow to the spout, e.g. solder or something lodged in the pipe. Something is impeding the flow of water to the spout and causing it to back up and go out the shower head. If this is the cause of shower-rise it is possible to remove the blockage by removing the tub spout; then, feeding a plumber’s snake or a speedometer cable up through the tub drop. The act of feeding it causes it to twirl and loosen the blockage. Be sure to flush the valve before reinstalling the tub spout. Be sure to check the tub spout itself for blockage. If none of these help, you may need to call a plumber. After the shower has been installed and the wall has been closed, there is little that can be done to remedy this situation yourself. Thanks, Dave Read more: http://www.deltafaucet.com/customersupport/faq/showers/index.html#ixzz2lsUElemAhank you for your question.

Thank you for your question, Andrew. This tub spout is 7" in length. Best regards, Jon

Hi Sunspot01! Thank you for your question and we are happy to help. The Delta RP64721 may be dripping due to the seats and springs needing to be changed in the valve which are RP4993. Please contact us directly for further assistance. Best Regards, Carrie

Hello Customer! Thank you for your question and we are happy to help. The Delta RP64721 is a tub spout repair kit. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Valued Customer, Thank you for your question regarding our Delta Faucet. The RP64721 spout will slip onto 1/2" copper piping that extends 1 1/4” to 1 1/2” from the finished wall. The slip-on adapter can be removed to allow it to thread into a 1/2" nipple that extends 3 7/8" - 4" from the wall. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Glen, Thanks so much for contacting Delta Faucet Company! The RP64721 tub spout attaches to a 1/2" pipe extended front the wall. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi spouting horn, Thank you for your question about the Delta Faucet RP64721. Installation instructions should be included with the spout or on the packaging. The spout will slip onto 1/2" copper piping that extends 1 1/4” to 1 1/2” from the finished wall. The slip-on adapter can be removed to allow it to thread into a 1/2" nipple that extends 3 7/8"- 4" from the wall. Silicone sealant may be used where the base meets the wall if there is still a slight gap. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi John, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. The Delta Faucet part RP64721 Tub Spout - Pull-Up Diverter In Chrome measures 7" and can be installed as a 1/2" slip on or remove the adapter for a 1/2" IPS install. Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Skyler

Hi Craig, Thank you for your question! Unfortunately, PR64721 would not be a Delta Faucet part number. I apologize that we cannot find any information about this number. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Valued Customer, Thanks so much for contacting Delta Faucet Company about RP64721! The tub spout will slip onto 1/2" copper piping that extends 1 1/4” to 1 1/2” from the finished wall. The slip-on adapter can be removed to allow it to thread into a 1/2" nipple that extends 3 7/8"- 4" from the wall. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Sri v, Thanks so much for contacting Delta Faucet Company! The FOUNDATIONS® Tub Spout MODEL#: RP64721 can either be installed as a slip-on to 1/2" copper pipe and held on with a set screw or threaded directly onto 1/2" IPS. The CLASSIC Tub Spout MODEL#: RP101727SS is installed to a 1/2" copper pipe or 1/2" threaded iron pipe. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi dave! Thank you for your question and we are happy to help. The Delta RP64721 is 7" in length. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Steve, Thank you for your question about the Delta Faucet RP64721. Please accept our sincere apology for the inconvenience you are experiencing with the tub spout diverter. We are happy to help! Unfortunately, we don't carry replacement parts for the diverter. The tub spout may need to be replaced. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello VC69, Thank you for question! We are pleased to assist! The Delta FOUNDATIONS Tub Spout can be used with your 1400 Series unit. Please feel free to contact back us for further assistance. Best Regards, Kelley

Hello Valued Customer, Thanks so much for contacting Delta Faucet Company! The Adapter W/ O-Ring MODEL#: RP12307 adapter works with tub spouts that thread on to 1/2" iron pipe or brazed onto 1/2" smooth copper. You could alternatively order the Tri-Universal Tub Spout adapter MODEL#: RP100154 which will cover all installation requirements. https://www.deltafaucet.com/kitchen/product/RP100154 Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Kyle, Thank you for your question. I do apologize for any confusion regarding your Delta product. We are happy to help! Feel free to contact us directly, so we can further assist you with this matter. I have included our contact information below. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Joshua

Hello Steve; Thank you for your question Can this tub spout be installed on a 1/2 threaded copper pipe ? Ill be glad to assist. The Delta tub spouts connection should be 1/2 inch copper or galvanized pipe. Your spout is slip on spout and does not require threaded connection. Best regards, Michelle