Tub Spout - Non-Diverter in Lumicoat® Chrome

Thank you for your question, Derek82! You can connect the RP90159 non-diverter tub spout to one of the diverter ports as a temperature tester only. Since the flow rate from the tub spout would be lower than a standard installation, we do not recommended to use it as a tub filler. Alternatively, you can install an R10000 and R11000 valve with corresponding trim kits. The tub spout should be connected to the bottom port of an R10000 valve to provide sufficient flow to fill a tub. Best regards, Tanya

Hi John, Thanks so much for contacting Delta Faucet Company! No, the RP90159BL uses a different connection for installation and can not be used with the R3500-WL. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello, Elda21! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! Yes, this Delta Faucet RP90159 Pivotal® Tub Spout - Non-Diverter In Chrome will work with the R22000-WS Integrated diverter rough-in valve. However, please note the following: As the diverter cartridge was designed to supply water to showerheads, body sprays and hand showers, the flow from the tub spout could be noticeably reduced compared to the standard direct flow from the control valve. There is no “fix” for that. Depending on the configuration of the fixtures, this may be between 0.3gpm to 1.5gpm. You may end up with the tub spout turning on while in a shared position, which can happen every time you change from body spray to hand shower for instance. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hello Bin Gold, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet PIVOTAL® Pivotal® Tub Spout - Non-Diverter In Chrome MODEL#: RP90159 can fit on a 1/2" threaded pipe that extends 5/8" to 1 5/8" from the finished wall, or it can be sweat onto a 1/2" copper pipe that extends 2" to 4". I have included links below to two non-diverter tub spouts with slip-on installations. https://www.deltafaucet.com/parts/product/RP64722.html https://www.deltafaucet.com/parts/product/RP77092.html Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole

Hi Valued Customer, Thank you for your question regarding our Delta Faucet RP90159SSPR. This tub spout can fit on a 1/2" threaded pipe that extends 5/8" to 1 5/8" from the finished wall or it can be sweat onto a 1/2" copper pipe that extends 2" to 4". Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 pm. m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Loul, Thank you for your question about the Delta Faucet RP90159BL. This tub spout is about 2.5" wide. See specifications here for more information: https://media.deltafaucet.com/SpecSheet/DSP-B-T14099%20Rev%20F.pdf Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Alex, Thank you for your question about the Delta Faucet RP90159BL tub spout. I am sorry this information was not readily available, and I am happy to help! We do make the RP101616 adapter so some of our tub spouts can be used with the R3500-WL valve rough. But, this RP90159 is not compatible. RP93249 is a 9" spout that will work with the adapter. Other compatible spouts included RP77350 RP43028 RP53237 RP77092 RP100453. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Installing RP90159SSPR! Thank you for your question and we are happy to help. We do not have an installation video but the maintenance and installation sheet is available online under your model number. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hi livinginaplumbersparadise, Thanks for your question regarding RP90159BL! Every tub spout has a specific type of installation. This model can fit on a 1/2" threaded pipe that extends 5/8" to 1 5/8" from the finished wall or it can sweat onto a 1/2" copper pipe that extends 2" to 4". Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist