Lenta®
Ver toda la colección para cocina Lenta®

Llave para cocina extensible de una manija en cromado

N.º de modelo: 19802Z-DST
Agregar a favoritos
Busque instaladores locales de Delta®
Lenta®
Ver toda la colección para cocina Lenta®
Llave para cocina extensible de una manija en cromado
N.º de modelo: 19802Z-DST
Precio de lista: $36590
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
Las llaves para lavabo de cocina con orificios rociadores Touch-Clean® le permiten limpiar con facilidad la acumulación de calcio y cal con solo deslizar el dedo. La tecnología ShieldSpray® de Delta® limpia con precisión láser y, a su vez, evita el desorden y las salpicaduras. Un chorro concentrado quita con potencia los restos difíciles de comida y, a la vez, un innovador escudo de agua contiene las salpicaduras y elimina el desorden. De esta manera, usted pasará menos tiempo remojando, fregando y cambiándose de camisa. Las llaves para cocina con tecnología de sellado DIAMOND™ Seal de Delta® funcionan como si fueran nuevas de por vida porque cuentan con un diseño patentado gracias al cual se reducen los puntos de fuga, la instalación es más sencilla y duran el doble que el estándar de la industria*. Las llaves para lavabo de cocina con orificios rociadores Touch-Clean® le permiten limpiar con facilidad la acumulación de calcio y cal con solo deslizar el dedo. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves para cocina de Delta están respaldadas por nuestra garantía limitada de por vida. *Estándar de la industria basado en ASME A112.18.1 de 500,000 ciclos.
  • El acoplamiento MagnaTite® utiliza un potente imán integrado para colocar la varilla rociadora de la llave de manera precisa en su lugar y mantenerla allí para que permanezca acoplada cuando no está en uso, y no se cae con el tiempo
  • La tecnología ShieldSpray® soluciona el problema sin provocar problemas
  • El chorro concentrado evita el desorden y el escudo de agua innovador reduce las salpicaduras
  • Los suaves orificios rociadores de goma Touch-Clean® le permiten limpiar fácilmente la acumulación de calcio y cal con solo deslizar el dedo
  • Gracias a la tecnología de sellado DIAMOND™ Seal, la instalación es más fácil y la llave funciona como si fuera nueva de por vida, ya que se reducen los puntos de fuga y la duración es dos veces superior en comparación con los productos estándar de la industria.
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex®
  • Se adapta a instalaciones con 1 o 3 orificios con placa de encimera de 10 3/4" incluida.
  • Cumple con la ADA.
  • El diseño de cuello de ganso con arco elevado gira 360 grados con una manguera retráctil de 20" para una comodidad superior durante las tareas cotidianas de la cocina.
Technology and Special Features
Cumplimiento con la ADA
Libres de plomo
Tecnología de sellado Diamond Seal®
ShieldSpray®
Acoplamiento MagnaTite®
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver especificaciones técnicas
Ver hoja de mantenimiento e instalación
Ver diagrama de repuestos y accesorios
Registrar su producto
Recursos
Archivos de diseño
Información de instalación
Instalación con 1 o 3 orificios de 8"
Instalación con 1 o 3 orificios de 8"
Overall Height (in.) :
16 1/4
Voltaje:
0
Caudal:
1.8 gpm a 60 psi, 6.8 l/min. a 414 kPa
Tipo de válvula:
Disco cerámico

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Explorar videos
LISTA DE PIEZAS

LISTA DE PIEZAS

Discontinuado
Discontinuado
Image-RP64074
Discontinuado

Trinsic®

Trinsic® Junta - Llave extensible

Precio de lista: $17.90
Acabados estándar

RP64074

Image-RP80619

DELTA

DELTA Tuerca de bonete

Precio de lista: $20.65
Precio en línea: $16.52
Free Ground Shipping All Orders $49+
Acabados estándar

RP80619

Image-RP21945

Delta®

Delta® Dispensador de jabón/loción - Tuerca

Precio de lista: $7.30
Precio en línea: $5.84
Free Ground Shipping All Orders $49+
Acabados estándar

RP21945

3.00 1
Discontinuado
Discontinuado
Image-RP49149
Discontinuado

Delta®

Delta® Contrapeso de manguera deslizante

Precio de lista: $34.20
Acabados estándar

RP49149

3.00 2
Image-Master-RP47274

Delta®

Delta® Cubierta - 10"

Precio de lista: $48.50 - $173.35
Free Ground Shipping All Orders $49+
Acabados Lumicoat
Acabados estándar

RP47274

Image-RP80977

Delta®

Delta® Kit de imanes de recambio

Precio de lista: $61.30
Precio en línea: $49.04
Free Ground Shipping All Orders $49+
Acabados estándar

RP80977

3.35 34
Image-RP60923

Delta®

Delta® Espaciadores de rozamiento y abrazadera - Cocina

Precio de lista: $21.40
Precio en línea: $17.12
Free Ground Shipping All Orders $49+
Acabados estándar

RP60923

5.00 2
Image-RP13938

Delta®

Delta® Junta tórica

Precio de lista: $7.25
Precio en línea: $5.80
Free Ground Shipping All Orders $49+
Acabados estándar

RP13938

4.50 2
Image-RP60911

Delta®

Delta® Abrazadera para manguera de conexión rápida

Precio de lista: $16.60
Precio en línea: $13.28
Free Ground Shipping All Orders $49+
Acabados estándar

RP60911

2.64 11
Image-Master-RP54972

Delta®

Delta® Casquillo - 1H (baño)

Precio de lista: $12.75 - $31.05
Free Ground Shipping All Orders $49+
Acabados Lumicoat
Acabados estándar

RP54972

Image-RP54975

Lahara®

Lahara® Junta tórica

Precio de lista: $14.10
Precio en línea: $11.28
Free Ground Shipping All Orders $49+
Acabados estándar

RP54975

Image-RP90248

Restauración

Restauración Aireador y llave

Precio de lista: $23.25
Precio en línea: $18.60
Free Ground Shipping All Orders $49+
Acabados estándar

RP90248

2.57 7
Image-RP92714

DELTA

DELTA Tornillería de montaje

Precio de lista: $40.40
Precio en línea: $32.32
Free Ground Shipping All Orders $49+
Acabados estándar

RP92714

4.33 3
Discontinuado
Discontinuado
Image-RP72998
Discontinuado

Trinsic®

Trinsic® Tornillo de fijación - Manija

Precio de lista: $16.90

RP72998

RESEÑAS
Rated 5 out of 5 by from Large Stainless Steel Farmhouse Sink We searched extensively for large stainless drop-in farmhouse sink with 16 gauge steel. This was perfect. Looks fantastic and is high quality. The mats that were included will ensure we maintain the quality of the sink.
Date published: 2024-09-05
Rated 5 out of 5 by from Just say “YES”! Gorgeous Gold Faucet makes the kitchen look classy.
Date published: 2024-03-24
Rated 1 out of 5 by from Kitchen Faucet Great Delta faucetn taht warms up the decor in my kitchen.
Date published: 2024-01-19
Rated 2 out of 5 by from Low water pressure We purchased this faucet to replace another delta faucet. After installing, we noticed a drastic change in water pressure. I'm not sure if this is a water saving feature, but I don't think I will be able to keep this as the pressure will barely rinse the sink clean.
Date published: 2023-11-08
Rated 5 out of 5 by from worth the money Love the look of this faucet. Modern yet classic look. Reasonably priced.
Date published: 2023-09-22
Rated 5 out of 5 by from I probably could have install the product myself, but I called the plumber just to be sure. Everything arrived just fine with all of the parts included.
Date published: 2023-09-18
Rated 1 out of 5 by from Lacks significant water flow I just had this faucet installed 3 days ago! What a horrible product! The water flow lacks any power. My plumber took the boxes with him otherwise I’d have it uninstalled and returned. I’m going to none the less buy a new faucet and throw this one in the trash. I didn’t watch the video when I purchased it but will on my new faucet. The water has little force. It removes no food from a plate. I’m really disappointed.
Date published: 2023-09-17
Rated 3 out of 5 by from Faulty Product? Remodel after Hurricane Ian. Purchased faucet in March, was installed in May. The faucet head has a constant drip, and a slight drip under the sink. I personally love the style, look. The off/on handle is tight and not fluid to movement.
Date published: 2023-08-22
  • y_2025, m_1, d_26, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_45
  • loc_en_US, sid_19802Z-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Preguntas y respuestas

Is the valve designed so that the vertical position of the handle is full coke and the fed 90degree position is full cold?  This is different than the other kitchen faucets we have had.

Asked by: Chuck
Hi Chuck, Thanks so much for contacting Delta Faucet Company about 19802Z-DST! The Euro motion cartridge does have a different handle operation. The handle should be straight up when off, you would grab the handle and tilt out for on and cold, then pull towards you for hot. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-08-02

Hi, I don’t see a soap dispenser in the Lenta collection, but the video has a shot with one. What which soap dispenser is recommended to pair with the faucet? Thanks, Chris

Asked by: Csbodkins
Hello Chris! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! The Delta Faucet soap dispenser shown in the video is the RP50781CZ soap dispenser in the Champagne Bronze finish. However, please see the following link to view all of our soap dispensers. https://www.deltafaucet.com/kitchen/accessories/soap-dispensers Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

How does one clean the screen inside the nozzle head?

Asked by: Jerry
Hello Jerry, Thanks so much for contacting Delta Faucet Company! To clean the product, we recommend you try soaking the product in a 50/50 solution of water and white distilled vinegar. This could break up any possible calcium buildup inside. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Kelley
Date published: 2025-01-07

How do i make the water hotter? It does not have the optional limit stop switch inside the handle. Is there a cartridge I can order?

Asked by: DEEDEE
Hi DEEDEE, Thanks so much for contacting Delta Faucet Company! The only way to increase the temperature would be to adjust your hot water heater. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

My Delta Lenta is missing the handle set screw. How can I replace it? 

Asked by: L3jsea
Hi L3jsea, Thank you for your question regarding our Delta Faucet 19802Z-DST. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

What parts is the faucet made out of?

Asked by: KP12
Hi KP12, thank you for contacting Delta Faucet Company! The total makeup of our products is considered proprietary and may vary depending on the model. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2023-08-09

I have a brand new Lenta 19802z-sp-dst kitchen faucet. It will not let the water get hot.  I was sent a new cartridge, that did not fix it.  has plenty of flowon both hot and cold settings, but it won’t let the water get hot.  How can I get hot water?

Asked by: anne
Hi anne, Thank you for your question regarding our Delta Faucet 19802Z-DST. The only way to increase the temperature would be to adjust your hot water heater. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

Do you have to hold down the button on faucet head while using the different water sprays or will it lock into position?

Asked by: Larry
Hi Larry, Thank you for your question about the Delta Faucet model 19802Z-DST. The switch between the aerated stream and the spray setting will stay in place without holding the button. The third setting, ShieldSpray, is intended to be used while holding the spray head near the plate or dish, and the button would be held down for ShieldSpray. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-16

Does the Lenta faucet default back to stream (from spray) when you turn it off and back on again?

Asked by: lynn
Hello Lynn, Thank you for your question about the Delta Faucet model 19802Z-DST LENTA™ Single-Handle Pull-Down Kitchen Faucet. I apologize for any difficulty finding this information. We are happy to help! The faucet includes a spray head with an aerator stream, a spray mode, and ShieldSpray mode. Press the buttons on the spray head to change between stream and spray. After releasing the ShieldSpray button the sprayer returns to stream mode. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

Can the handle/lever on the Lenta faucet be changed to the right side of the faucet?

Asked by: Clifford
Hello Clifford! Thank you for your question and we are happy to help! The Delta LENTA™ Single-Handle Pull-Down Kitchen Faucet MODEL#: 19802Z-DST handle is already on the right side. You are able to install the faucet with the handle on the opposite side but the controls will be reversed. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

How do I register it for the warranty?

Asked by: Brian3757
Hi Brian3757! Thank you for contacting us at Delta Faucet! I will be happy to help. Please contact us directly via email or phone in order to register your product. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

Can this faucet be mounted directly to counter without deck plate

Asked by: Deltagirl22
Hi Deltagirl22, Thanks so much for contacting Delta Faucet Company! The 19802Z-DST can be installed with the plate for a 3 hole install, or just install the faucet in a single hole with no plate. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Hello - the space between the back of my over mount kitchen sink & the backsplash is 3 1/2 inches with the hole centered. Will the Lenta faucet fit in this space?

Asked by: Beth
Hi Beth, Thank you for your question about the Delta Faucet model 19802Z-DST. Yes, we recommend a minimum of 2 1/2" from the hole center to the back splash to best operate the handle. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-09-13

Is the aerator removable for cleaning/replacement? What size is it?

Asked by: tmcginn9
Hi tmcginn9, Thanks so much for contacting Delta Faucet Company! Yes, the aerator can be removed for cleaning and maintenance. This aerator has a M16.5x1-8g thread size. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Does model 19802Z-SP-DST have a matching bar faucet with spray

Asked by: Ball
Hi Ball, Thanks for your question regarding 19802Z-DST! No, the Lenta™ Collection does not currently have a matching bar/prep faucet; however, I have included a link below to our bar/prep faucets: https://www.deltafaucet.com/kitchen/specialty-faucets/barprep?page=2 Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I just purchased a new New Delta Single-Handle Pull-Down Kitchen Faucet on Amazon. The spray head will not stay attached. It appears that the clip at the top of the spray head is broken.

Asked by: rcat
Hi rcat, Thank you for your question regarding our Delta Faucet 19802Z-DST. We have reached out to you directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-05-28

Is there any way to use a portable dishwasher with this faucet?

Asked by: Keljo3420
Hello Keljo3420! Thank you for your question and we are happy to help! Unfortunately, we do not have any recommendations for portable dishwashers that can or cannot be used with our faucet. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

I have a cabinet above my sink. How much space do above the sink to install the Lenta?

Asked by: Jer1
Hi Jer1! Thank you for your question and we are happy to help. The Delta 19802Z-DST is 15 3/4" (400 mm). With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-10-07

What is the overall all height of faucet and the clearance needed for water levers from back splash to work properly. 

Asked by: SueP
Hello Sue, Thank you for your question about the Delta Faucet model 19802Z-DST Lenta™ Single-Handle Pull-Down Kitchen Faucet In Chrome. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! The height is 15.75" and the minimum clearance to the backsplash should be 2.5" from the hole center. See the specification sheet for more information: https://media.deltafaucet.com/SpecSheet/DSP-K-19802Z-DST%20Rev%20A.pdf Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Customer Service
Date published: 2024-03-28

What metal is the faucet made of

Asked by: Suzy
Hi Suzy, Thank you for your question! This model may contain, bronze, brass (36000, 260) (hub, handle, body, tube, fittings, zinc (escutcheon, hub, handle), stainless Steel (undercover plate, seat liner, set screw), copper (tubing), aluminum, PEX-C (puck and tubing), silicone (gaskets), synthetic rubber - EDPM, santoprene (hoses), vinyl (hoses), nylon, plastics, and ceramics. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-14

How wide is the base?

Asked by: Ecg7
Hello Ecg7, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 19802Z-SP-DST Single-Handle Pull-Down Kitchen Faucet has a single-hole base width of 2 3/8" and a 3-hole escutcheon base width of 10 3/4". Please contact us back directly via email with any further questions. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

Is it possible to get a smaller deck plate with this faucet?

Asked by: Randou
Hello Pa, Thank you for your question! We will be happy to help you today. The 10 1/2 inch escutcheon RP47274SS is the only one for this faucet. Please contact us back for any further questions. Best Regards, Renna
Answered by: Delta7
Date published: 2024-03-28

I need to know the set screw size that is needed for the handle. The original has fallen out somehow. Thanks.

Asked by: Nick
Hi Nick, Thank you for your question about the Delta Faucet model 19802Z-BL-DST. The handle set screw size is #8-32x.43. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

my Lenta faucet came with a black sprayer. I thought I was getting a stainless sprayer. Can I buy a stainless sprayer and swap out?

Asked by: Guy Gehlert

Which soap dispenser would look best with this faucet since there isn't a Lenta style dispenser?

Asked by: Teresa
Hi Teresa, Thank you for your question about the Delta Faucet model 19802Z-CZ-DST. We carry soap dispensers in a variety of styles. A couple of examples are models RP101850CZPR and RP101629CZPR. https://www.deltafaucet.com/parts/product/RP101850CZPR.html https://www.deltafaucet.com/kitchen/product/RP101629CZPR.html Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

How long are the 3/8" pex supply lines for the Lenta faucet model?

Asked by: Rick
Hi Rick, Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. The PEX supply lines for this Delta Faucet model 19802Z-SP-DST are 38" long. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Does it matter if my sink is drop in or under mount?

Asked by: Lance
Hello Lance, Thanks so much for contacting Delta Faucet Company! The Lenta® Single-Handle Pull-Down Kitchen Faucet Model#: 19802Z-SP-DST can be used in either an undermount or drop-in sink. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Kelley
Date published: 2024-12-05

I have had this faucet for approximately a year. Suddenly it started having a low flow. I cleaned the head and that did not help.  

Asked by: Blue
Hi Blue, thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and will be happy to assist you! We have reached out to you for further assistance with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Can the faucet be adjusted to make my water hotter?  Does not get as hot as my previous faucet. 

Asked by: Gypsyred3
After removing the handle there is not an option to slide from a 1 or 2 position.  Does not look like the picture as provided.  
Answered by: Gypsyred3
Date published: 2024-03-28

Can get a different Spray pattern or nozzel on my Lenta 19802Z-SP-DST faucet?

Asked by: Papa
Hi Papa, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Lenta™ Single-Handle Pull-Down Kitchen Faucet In Spotshield Stainless MODEL#: 19802Z-SP-DST and all of our pulldown/pullout faucet wands are manufactured model specific, unfortunately, there is not another spray pattern or wand option other than the one included with your model. I am sorry for any inconvenience this may have caused. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28
  • y_2025, m_1, d_28, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_85
  • loc_en_US, sid_19802Z-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 44ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.