Llave para cocina de una manija con rociador en cromado

Hi, Dave! Thank you for your question. The diverter assembly may need to be replaced. The diverter is RP44124. Here is a link to the part on our website: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP44124 You can also try flushing the valve without the diverter and aerator installed. To do this, turn the water off at the shut off valve. Remove handle to get to the diverter and remove. Keep rest of the parts installed. Reinstall the cap and handle. Remove the aerator. Turn the water on at the shut off valve. Flush the water without the aerator and diverter installed for 30-45 seconds. Turn water off at faucet and and shut off valve. Reinstall diverter and aerator. If this does not fix the issue, do replace the diverter assembly. Best Regards, Rosanna

Thank you for your question, Bill! To remove the spray hose from your faucet, you will need to press in on the textured portion on the tabs on both sides of the white block connector. Once you have applied pressure, push up slightly and then pull the hose straight down off the fitting. Best regards, Edward

Thank you for your question. Delta Faucet model B4410LF is equipped with a 9 1/2" spout. We do offer a 14" spout that will fit this model. This model has the longest spout that we manufacture.

No

Hi, Thank you for contacting us. We apologize for any inconvenience. We are more than happy to help you. To place an order for you, we would like to gather some more information first. Could you please provide a date of installation. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany

Hi, Jogger! Thank you for your question. The handle assembly on the B4410LF Faucet can be removed by first popping the red/blue button out by using something small and flat. Once removed, the set screw can then be unscrewed with a 1/8" Allen Wrench. The handle can then be removed. Best Regards, Rosanna

It came pretty long and already. If you have the tools and the know how I'm sure it can be done

casseyyyyyyy, This product is not Buy American Act certified. We're proud to manufacture most of our products at our plants in Jackson TN, Morgantown KY, Lapeer MI, and Greensburg, IN. As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where the specific faucet was made. Best regards, Jon