DELTA

Diverter Tub Spout in Lumicoat® Chrome

N.º de modelo: RP101394
Agregar a favoritos
Busque instaladores locales de Delta®
DELTA
Diverter Tub Spout in Lumicoat® Chrome
N.º de modelo: RP101394
Precio de lista: $117.65
Precio en línea: $94.12
Free Ground Shipping All Orders $49+
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
Con un diseño inspirado en la forma de los veleros, la colección para baño Galeon™ le da un aspecto contemporáneo cincelado al baño. Complete the look of your bath with this Diverter Tub Spout. Nuestros productos de Delta® están especialmente diseñados para que su instalación sea simple y mejorar su uso diario en todo momento. You can install with confidence, knowing that Delta faucets and showers are backed by our Lifetime Limited Warranty.
  • Coordinates perfectly with the Delta® Galeon™ bath collection
  • Tire para desviar el agua de la salida de la bañera a la regadera.
  • 8-5/8 inches total length
  • Thread-on tub spout connection
  • Se vende por separado
  • Respaldado por la garantía limitada de por vida de Delta Faucet
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver hoja de mantenimiento e instalación
Registrar su producto
Información de instalación
Overall Height (in.) :
3
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 4ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Preguntas y respuestas

Does this tub spout (rp101394) require an adapter? Instructions supplied show all kindsof adapter assembly methods yet the spout model is not listed.The spout only has a female threaded end. I assume a 1/2 in. male NPT/sweat fitting is all that is needed?

Asked by: Don S
Hi Don S, Thank you for your question about the Delta Faucet RP101394 tub spout. I am sorry this information was not readily available, and I am happy to help! This spout is designed to fit a 1/2" IPS threaded pipe, directly. We do not currently carry an adapter for a sweat or slip-on connection for this tub spout. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Since the instructions do not reference what is in the box, could you please provide a step by step on how how to mount the brass insert to the ips and then how to mount the spout to the brass insert and in what sequence.

Asked by: Frustrated
Hi Frustrated, Thank you for your question about the Delta Faucet RP101394 tub spout. This tub spout does not use an adapter and threads directly to an iron pipe. See page 6 of the installation instructions here: https://media.deltafaucet.com/MandI/107700%20Rev%20J.pdf See page 4 for tub spouts that are installed to IPS with a brass adapter. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-10-31

Installation Instructions 107700 (p.6) - no specific reference given to model number RP101394 and therefore no reference for the pipe length extension. Please post this dimension or direct to the correct installation document. Thanks again.

Asked by: Jill177
Hi Jill177, Thanks so much for contacting Delta Faucet Company! The RP101394 uses a 1/2" IPS that should stick out from the wall approx., 0” - 1/4” max. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Installation instructions provided do not reference this particular model. Can you please provide the correct installation guide.

Asked by: Kelly S
Hi Kelly S, thanks for your question regarding RP101394! This spout is designed to fit a 1/2" IPS threaded pipe. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

IPS or NPT ? Please clarify as instructions document# 107700 Rev E states (page 6) NPT.

Asked by: Jill177
Hi Jill177, Thanks so much for contacting Delta Faucet Company! This spout is designed to fit a 1/2" IPS threaded pipe. The NPT installation type only applies to other certain tub spout models listed on page 6. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2024, m_12, d_22, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_RP101394, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 23ms
  • questions, product
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California