Delta®
Dispensador de jabón/loción en cromado
N.º de modelo: RP50781
Image Thumbnail, click to view zoomed product image 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
- CARACTERÍSTICAS DEL PRODUCTO
- Documentos y especificaciones
- RESEÑAS
- Preguntas y respuestas
- LISTA DE PIEZAS
CARACTERÍSTICAS DEL PRODUCTO
- Para usar como dispensador de jabón o loción
- Botella de 13 onzas de gran capacidad
- Se puede rellenar desde arriba de la encimera
- Pida el embudo de relleno con ventilación RP30395 por separado
Technology and Special Features
Dispensador de jabón
Dispensador de jabón
El dispensador de jabón o loción combina con el estilo de la cocina y se carga cómodamente de la parte superior. No será necesario que tenga una botella de jabón líquido o loción en la encimera.
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Información de instalación
Instalación con 3 o 4 orificios de 8-16"
Overall Height (in.) :
2 15/16
Voltaje:
0
Tipo de válvula:
NA
SOPORTE PARA LA INSTALACIÓN
¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.
¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.
LISTA DE PIEZAS
LISTA DE PIEZAS
View Product
![Image-RP21945]()
Delta®
Delta® Dispensador de jabón/loción - Tuerca
Precio de lista: $6.95
Precio en línea: $5.56
Free Ground Shipping All Orders $49+
Acabados estándar
RP21945
3.00 1
RESEÑAS
Rated 1 out of
5
by
Don170 from
Very difficult to pump soap. Get very small drop. From first time it was used. What is the problem?
Date published: 2024-11-23
Rated 4 out of
5
by
Ky lady from
Length of spout.
Only downside is length of spout. Needs to be a little longer (maybe only 1/2 to 1 inch) to reach over edge of sink. It’s difficult to reach a dish or pan placed underneath. When detergent added directly to sink some trickles down the side. The problem may be the single sink with edge around top. Otherwise ok. Matches the faucet.
Date published: 2024-10-28
Rated 1 out of
5
by
Mark from
Doesn’t match
[This review was collected as part of a promotion.] Didn’t match the faucet it was sold with.
Date published: 2024-09-01
Rated 5 out of
5
by
Patti from
Broken pegs holding the tubes
I have had this for quite a few years, without any trouble. And have enjoyed the convenience, yesterday, I noticed it was sitting funny, since I just filled the bottle. But, I have searched, and to replace the top, I would have to buy a brand new one. Why, is the top, not available to buy, by itself, considering the rest is in good condition. I have learned how to fill, without overflowing it.
Date published: 2024-06-25
Rated 2 out of
5
by
CJT7 from
Breaks Easily
We are on our 2nd one of these in 2 years. For $90 I didn't expect this to be a reoccurring issue.
Date published: 2024-05-28
Rated 4 out of
5
by
Marie from
Soap dispenser
Does not push down easily. Nice looking
Date published: 2024-04-28
Rated 4 out of
5
by
Phil EH from
Nice Looking Soap Dispenser
This is a fine product and works well. The design of the soap dispenser looks good, but otherwise there's nothing special about it. A good choice and nice looking.
Date published: 2024-03-21
Rated 3 out of
5
by
Lisa from
Ugh, soap only trickles out
This soap dispenser looks great, but….. it’s very hard to pump the soap out. It takes many consecutive pumps before we get enough out to wash our dishes. It’s such a slow process. It was installed in May 2023. It’s Feb 2024.
Date published: 2024-02-06
Preguntas y respuestas
Black gasket placement on soap dispenser installation
The diagram photo and your previous reply in Q&A state that the black gasket should be installed on top of the sink. How is this possible, there is then a gap (probably 2 mm large, the size of the gasket) between the base of the product and the sink, the dispenser will not sit flush mount, water will definitely get into the gap. The mounting nut is tightly in place underneath, that is not the issue, the design seems majorly flawed. How do you get a flush mount installation to avoid water damage when the black gasket is preventing the unit from sitting flush?
Dear Susan,
Thank you for your question. The gasket for installing the Delta RP50781 Soap/Lotion dispenser is a thin foam white gasket. This gasket fits on the underside of the trim base, that sits on the sink/counter top.
Best regards,
Tanya
Date published: 2016-09-24
Have the Delta soap dispenser 50781 and the pump does not work. Is there a replacement pump available?
Hello Lynn,
Thank you for your question regarding the Delta Soap / Lotion Dispenser and I am happy to assist you today.
I am very sorry to hear that the pump is no longer working properly and I apologize for the inconvenience this has caused.
The replacement part number for the pump and bottle for this model is RP47888.
Please visit the link below to view this product:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP47888
Also, please refer to the email I sent to you regarding this issue and we will be happy to help you where we can and if we can assist you with anything else going forward, please do not hesitate to give us a call at 800-345-3358.
Thank you,
Brandy
Date published: 2024-03-28
The plastic soap bottle for my soap dispenser under my sink broke. How can I get a new plastic bottle?
Hello Lori,
Thank you for your question regarding the Delta Soap / Lotion Dispenser.
I am very sorry to hear that the bottle for your dispenser broke and I am happy to help you today. I apologize for the inconvenience this has caused.
Please refer to the email I sent to you or you may give us a call on our warranty line at 800-345-3358 and we will do our best to rectify this issue.
Thank you,
Brandy
Date published: 2024-03-28
Have a broken Delta Soap Dispenser RP50781 in Chrome from a recent kitchen remodel. Do you replace this part free?
Hello Sota2018,
Thank you for your question regarding the Delta Soap / Lotion Dispenser.
I am so sorry to hear that your dispenser is broken and I apologize for the inconvenience.
I am happy to help you with replacing the dispenser today.
When and which store did you purchase the dispenser from and how did the dispenser end up breaking?
Also, please respond back to the email I sent to you with your contact information and a photo of the model.
We hope to hear back from you soon!
Thank you,
Brandy
Date published: 2024-03-28
I need a replacement plastic bottle for a RPS 0781 Soap Dispenser. How do I order one?
Hi Greg,
Thank you for your question. You can purchase the RP47888, which will include the pump assembly and bottle.
http://www.deltafaucet.com/repairparts/details/rp47888.html?showPhotoGallery=false
Thanks,
Jon
Date published: 2024-03-28
Can I purchase just the top knob on the soap dispenser?
Hello Jmsbp13,
Thank you for your question regarding the Delta Soap / Lotion Dispenser and I am happy to help you today.
Unfortunately, there is not a replacement part number associated with the head assembly and spout and I apologize for any inconvenience this may cause.
If you could please respond back to the email I sent to you regarding this matter, we will be happy to assist you further.
I look forward to hearing back from you!
Thank you,
Brandy
Date published: 2024-03-28
What type of hand soap should I be using in my Delta model 11946-SD-DST soap dispenser?
The dispenser seems to get plugged up frequently. I am currently using a brand called Softsoap. I have also used Dial liquid. They both just plug up the dispenser. Should I be using a liquid foaming soap?
Hi Vicki, Thank you for your question. Any liquid soap will work in the soap dispensers. The foamimg soap will not foam when used in the soap dispenser. Without frequent use the soap can dry out affecting the performance of the dispenser.
Thanks,
Dave
Date published: 2024-03-28
Is there a shorter soap dispenser bottle? We cannot install the bottle due to the location of the plumbing. We would need a 4 inch bottle instead of the large capacity 6.5 inch height.
Thank you for your question, Becky! Unfortunately we do not manufacture a 4" soap dispenser bottle and I apologize for any inconvenience this may cause however our sister company Liberty Hardware does offer an above counter soap dispenser to match our Victorian collection that mounts to the wall instead as model number 75055.
https://www.deltafaucet.com/bathroom/product/75055
Best regards, Edward
Date published: 2024-03-28
Can the head be swiveled left or right to be out of the way?
Thank you for your question, Carol G! The head of this soap dispenser is not attached and so it does swivel but can also be lifted up off the unit for easy above-counter refilling.
Best regards, Edward
Date published: 2024-03-28
I have the RP50781AR Soap/Lotion Dispenser that we bought new in January 2014. It won't pump now. I've taken the head with the tube out and washed it with warm water. The white part with the spring in it appears to be stuck/frozen and won't pump. Any idea
Hello Jack,
Thank you for your question regarding the Delta Soap/Lotion Dispenser and I am happy to assist you today.
I am sincerely sorry to hear that the pump has stopped working and that cleaning the components still did not allow soap to pass through. I apologize for the inconvenience this has caused.
If you could please refer to the email I sent to you regarding this issue, we will be happy to assist you with resolving this matter.
We hope to hear back from you soon!
Thank you,
Brandy
Date published: 2024-03-28
does d the soap dispenser come with the life time warranted
Hi Carlos, Thank you for your question.
Delta® Non-Electronic Lifetime Faucet and Finish Limited Warranty
All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home. Delta recommends using a professional plumber for all installation and repair.
Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use and service.
Replacement parts may be obtained by calling 1‑800‑345‑DELTA (3358).
Thanks,
Dave
Date published: 2024-03-28
Which finish is closer to "Brushed Nickel". Stainless or Artic Stanless?
I am trying to match existing Delta Kitchen faucet with replacement Delta soap dispenser for which the spout broke off. This dispenser has a potentially stronger design so the spout will not break off, but is not available in "Brushed Nickel".
Thank you for your question. Delta Faucet model # RP50781 is available in Champagne Bronze, Artic Stainless, Stainless Steel, Chrome and Venetian Bronze. The Artic Stainless has a bluish tint and most closely resembles the stainless steel applicances in the market today. The Stainless Steel finish has a more gold tint to it and looks a little more brushed than the Artic Stainless.
Date published: 2024-03-28
Black gasket placement on soap dispenser
Your previous answer regarding the placement of the black rubber gasket during installation states that there in a thin foam white gasket that fits on the underside of the trim base, that sits on the sink/counter top. Since this foam white gasket has already been affixed, I assume your instuctions to remove the gasket refers to the black rubber gasket? If so, where should I install this black rubber gasket?
Hello Matt,
Thank you for your question on the Delta Soap / Lotion Dispenser. I will be more than happy to assist you and I do apologize for any inconveniences. Below you will see a link to the install manual for the soap dispenser. If you go to page 9 step 5 it will show you where the rubber gasket can be placed. If you need anything further please contact us by calling 800-355-3358.
https://media.deltafaucet.com/MandI/64943%20Rev%20F.pdf
Thanks,
Sarah
Consumer Care
Delta Faucet Company
Date published: 2019-09-06
I love the faucet but soap dispenser broke almost immediately. It’s actually the plastic part under the pump that broke. Am I able to just get the top part without having to order the entire dispenser?
Hello Alda,
Thank you for your question regarding the Delta Soap / Lotion Dispenser.
I am sincerely sorry to hear that your soap dispenser broke so soon after installing it and I apologize for the inconvenience this has caused.
I am happy to help you today.
If you could please refer to the email I sent to you, we will be happy to assist you further with resolving this issue.
We hope to hear back from you soon!
Thank you,
Brandy
Date published: 2024-03-28
There's a loose black rubber gasket & also a white sealant attached the bottom of the base that affixes to the top side of the sink. The white seal seems to replace silicone. Does the black gasket still go above the sink, or below with the plastic nut?
Hello Bill,
Thank you for your question on the Delta Soap / Lotion Dispenser. I will be happy to assist you today.
The black gasket should be installed below the deck between the deck and the mounting nut.
If you ever have any questions, concerns, or require anything further please feel free to give us a call on our warranty line at 800-345-3358 and we will be happy to assist you in any way that we can.
Thank you,
Matthew I.
Delta Faucet Company
Consumer Care
Date published: 2024-03-28
Just had RP50781RB soap dispenser installed. Plumber advised to read full instructions to addd some water with soap product. Please advise.
Hi, Sheila!
Thank you for your question. Adding water is not necessary to use your Delta soap dispenser.
Best Regards,
Rosanna
Date published: 2017-04-17
I have a 2011 Ashton 19922-SSSD-DST faucet set. I need to replace the soap dispenser pump handle (the pump tube receiving housing has come loose from the pump handle). Is this assembly available separately? What part #? Thanks.
Thank you for your question, andy123! I do apologize for any issue you may be having with this soap dispenser, but will be more than happy to help! The pump and bottle on model RP50781SP can be ordered separately. The part number for the pump and bottle is RP47888. I have included a link to the parts breakdown for the RP50781SP soap dispenser, for you to refer to. Feel free to contact us directly, if you need further assistance.
https://media.deltafaucet.com/PartsDiagram/DPD-K-RP50781%20Rev%20A.pdf
Best Regards, Benjamin
Date published: 2024-03-28
What size hole is to be drilled in a granite countertop for the RP50781AR soap dispenser????
Hello Keith,
Thank you for your question regarding the Delta Soap / Lotion Dispenser and I am happy to assist you today.
This dispenser requires a 1 3/8" hole to be drilled.
If we can assist you with anything else going forward, please do not hesitate to give us a call at 800-345-3358.
Thank you,
Brandy
Date published: 2024-03-28
The soap dispenser on our delta product has disintegrated and no longer pumps. Can I get a replacement part? I think the model number is RP50781 and is either stainless or brushed nickel. I can send a photo if that would help.
Hi, Thank you for contacting us.
We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you.
The replacement parts have been ordered and should arrive within 10-14 business days and you will receive two emails, one for order confirmation and one with tracking when it ships.
Please contact us if you have any further questions or if you need further assistance you may call us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your cooperation.
Best Regards,
Bethany
Date published: 2024-03-28
Is this still available in Black SS?
Hi, JoeTEST!
Thank you for your question. The Delta RP50781KS Soap Dispenser in the Black Stainless Finish is still available to purchase anywhere Delta Faucet products are sold.
Best Regards, Rosanna
Date published: 2024-03-28
Is there the same style dispenser that is about 2 inches higher above the sink top?
Thank you for your question. All of our soap dispensers are flush with the countertop except for one model. Delta Faucet model # RP47280SS sits on top of the countertop.
Date published: 2024-03-28
I am trying to match a brushed nickel faucet with your soap dispenser. What is difference in color between Actic Stainless and just Stainless?
Is Stainless or Arctic Stainless what you consider to be equal to brushed nickel?
Thank you for your question. The difference between Artic Stainless and Stainless Steel is that Artic Stainless more closely matches today stainless steel appliances. It has a bluer tint to the finish and Stainless Steel has a gold tint to the finish.
Date published: 2024-03-28
What material is the soap pump - plastic or metal?
My customer wants a soap dispenser in champagne bronze that is metal, not plastic.
Hi Jeri,
Thanks for your question. The Delta soap dispensers are a durable plastic. The reason being is the plastic will hold up better than the metal against rust.
Date published: 2024-03-28
Is it possible to replace just the top peice?
I recently bought the faucet and soap dispenser for my sink. Well yesterday my cat decided to run across the soap dispenser while my food disposal was running and knocked the top price down into it. Well that leaves me frantically searching to replace the top part as the rest of it is brand new.
Hello Momstheword,
Thank you for your question on the Delta Soap / Lotion Dispenser.
Unfortunately, we do not have a replacement part number set up for the top head assembly for this dispenser at this time and I apologize for any inconvenience this may cause.
Please refer to the email I sent to you regarding this issue and I will do my best to help rectify the situation.
Feel free to give us a call if we can help with anything further at 800-345-3358.
Thank you,
Brandy
Delta Faucet Company
Customer Service
Date published: 2024-03-28
What size hole do I need to drill?
Hi, Mike!
Thank you for your question. The Delta RP50781SS soap dispenser requires a 1 3/8" (35 mm) hole size.
Best Regards,
Rosanna
Date published: 2024-03-28
I need to order the plastic pump that goes with this soap dispenser. Please advise.
Hi Rita,
Thank you for your question!
The pump assembly for your RP50781AR is RP47888. Here is a link to the part on our website: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP47888
Best Regards,
Rosanna
Date published: 2018-01-13
Is there a warranty on this item ? Delta RP 50781RB
Hi, Jack!
Thank you for your question. The Delta RP50781RB Soap Dispenser does include a Lifetime Limited Warranty when purchasing the unit. Learn more about our warranty, here:
https://www.deltafaucet.com/service-parts/warranty
Best Regards, Rosanna
Date published: 2024-03-28
My model RP50781AR Soap dispenser pump sticks. It doesn’t return to the full pumping mode and therefore it doesn’t pump. Can I get a replacement pump to fix this problem? Thank you.
Hello Joe I,
Thank you for your question regarding the Delta Soap / Lotion Dispenser. I will be happy to assist you today.
I am very sorry to hear that you are experiencing issues getting your soap dispenser to pump properly, and I apologize for any inconveniences this may have caused.
Please refer to the email that I have sent to you regarding this issue and we will be happy to assist you further.
Thank you again!
Matthew
Delta Faucet Company
Consumer Care
Date published: 2024-03-28
I'm trying to replace an Opella plastic Kitchen Soap Dispenser - the hole in the sink will only allow a 7/8" threaded flange. Does Delta make a Kitchen Soap Dispenser that has a 7/8" Threaded Flange? If so, part number, stainless?
Thank you for your question, JimZ! Delta soap dispensers are designed to fit most standard installation holes but will require a minimum 1 1/4" to accommodate the threaded shank.
https://media.deltafaucet.com/SpecSheet/DSP-K-4380-SD-DST_Rev_B.pdf
Best regards, Edward
Date published: 2024-03-28
What is your warranty on the soap dispenser? There is a lot of comments regarding the plastic breaking and that they stop working. I hate to get one and have to replace it every year or two. Thanks
Do you have a replacement cap for the soap dispenser?
Date published: 2024-03-28
BUNDLES FEATURING THIS PRODUCT
View Product
![Image-Master-FVS2-LD1109]()
Solo en minoristas en línea
Leland®
Leland® Touch2O® with Touchless™ Pull-Down Kitchen 1L with Soap Disp Bundle
Precio de lista: $693.35 - $917.55
Acabados estándar
FVS2-LD1109
View Product
![Image-Master-FVS2-LD1110]()
Solo en minoristas en línea
Leland®
Leland® Touch2O with Touchless and VoiceIQ® Technology Single Handle Pull-Down Kitchen Faucet with Soap Dispenser
Precio de lista: $893.50 - $1,117.70
Acabados estándar
FVS2-LD1110
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.