Aireador - 2.2 GPM

Thank you for your question. Delta Faucet model # 4380-DST contains a 1.8 gpm at 60 psi aerator. That is the RP70718. If you would like a lower flow aerator, we have a 1.5 gpm available with RP60983, a 1.0 gpm with model RP63886 and a .5 gpm with model RP60729.

Hi, Rob! Thank you for your question. the RP53998 aerator does not come with an aerator wrench. You will need the RP52217 aerator wrench for this aerator. Here is the link for the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP52217 Best Regards, Rosanna

Hi LPT, Thank you for your question. The insert for the model RP37018 aerator is not available as a separate piece. The entire assembly RP37018 must be ordered. Thanks, Dave

Hi Kris, Thank you for your question. The RP53998 aerator is compatible with the 9192-DST faucet. However the existing faucet RP50815 aerator is a full flow aerator. The faucets that use this aerator have other components inside the faucet that control the water flow rate. Changing the aerator to a RP53998 2.2 gpm aerator will not increase the flow rate of the faucet. Thanks, Dave

Thank you for your question. Delta Faucet model # RP53998 is a 2.2 GPM at 60 psi aerator. We do manufacture a 1.8 gpm aerator. That model number is RP70718.

Hi, Tony! Thank you for your question. The Delta RP53998 cached aerator is not an insert and will not fit in the housing of the RP37018 aerator. Best Regards, Rosanna

Hi Richard, Thank you for your question. Delta aerator RP53998 is not compatible with model 470-AR-DST. Best Regards, Courtney

Thank you for your question, jimbees! The Lewiston wand assembly, RP60931 has an aerator that does not have its own separate part number. The wrench can be used to remove the aerator for cleaning, however, if the aerator needs replaced, then the whole wand will need to be replaced. We do make an aerator with the same thread size that will work with this wand. It is part number RP50815. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50815 Best regards, Edward

Hello Michael, Thank you for your inquiry! We do not manufacture a separate o-ring for the aerator RP53998. You would need to replace the whole aerator, if it is damaged. Please feel free to reach out to our customer service team at 1-800-345-3358 or customerservice@deltafaucet.com if there is anything you need. Best regards, Tanya

Thank you for your question, Gary! This is not the same size aerator and will not fit. The RP50815 is the correct aerator for your model. Please let us know if you have any further questions or need assistance. https://media.deltafaucet.com/PartsDiagram/DPD-K-16953-DST.pdf Best regards, Edward Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com| Facebook/Twitter: @deltafaucet

Thank you for your question, Eddie. The RP53998 aerator has a thread size of M21.5x1-6G. The RP51505 adapter will convert this size to a male 55/64”-27 thread. Unfortunately, we do not make an adapter for the M24x1 size, but you may be able to find a compatible one locally or online. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51505 Best regards, Jon

Hello Cass82, Thank you for your question! We are happy to help you. The Delta ADDISON Single Handle Pull-Down Kitchen Faucet requires the RP90248 aerator and wrench. Please see the parts diagram for further details. I have attached the link below. https://media.deltafaucet.com/PartsDiagram/DPD-K-9192T-DST.pdf Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello Jason, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Aerator - 2.2 GPM MODEL#: RP53998 would work with our Delta Faucet 155-RB-DST, please see the link below to the parts diagram. https://media.deltafaucet.com/PartsDiagram/DPD-K-155-DST.pdf Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole

Hi Clydey, Thank you for contacting Delta Faucet Company! The maximum flow rate of our 2390L-AR-DST is 1.8 GPM at 60 PSI. This model does not have an option for a different aerator with a higher flow. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi James! Thank you for your question and we are happy to help. The RP53998 and RP70718 are both the correct repair parts for the 4380-DST. There is no chrome aerator that extends beyond the spout. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Randy, Thank you for your question! You will need the RP52217 aerator wrench to install this. https://www.deltafaucet.com/parts/product/RP52217.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Adeal, Thank you for your question! No, model 19802TZ-SP-DST uses the RP90248 aerator. https://www.deltafaucet.com/parts/product/RP90248.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Tiger Bob, Thanks so much for contacting Delta Faucet Company! The Valdosta pullout and pull-down kitchen faucets will only provide a flow rate of 1.8gpm at 60 psi. Unfortunately, we do not currently offer an aerator with a higher flow rate at this time. We apologize for any inconvenience this may have caused. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Leslie, Thanks so much for contacting Delta Faucet Company! The TRASK™ Pull-Down Kitchen Faucet With Soap Dispenser MODEL#: 19933-SPSD-DST spray assembly does not have a removable aerator. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello, Mark! Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Aerator - 2.2 GPM MODEL#: RP53998 uses the RP52217 aerator wrench. Here is the link for the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP52217 Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar

Hello Melissa, Thank you for your question. I apologize for any difficulty finding this information. We are happy to help! The Delta Faucet Leland 978-DST faucet model uses the aerator part number RP50815. https://media.deltafaucet.com/PartsDiagram/DPD-K-978-DST%20Rev%20C.pdf The aerator RP53998 has the same thread size and would also fit. We appreciate your business and look forward to continuing to serve you! Best regards, Bryan

Hi Susie, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet RP53998 aerator is not compatible with model 2497LF. Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist

Hi Town Crier, Thanks so much for contacting Delta Faucet Company about, RP53998! The aerator thread count is model specific to the faucet, A112.18.1 is stamped during manufacturing and does not provide the model number or thread size. The RP53998 thread size is M21.5x1-6G. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Our RP53998 aerator has a thread size of M21.5x1-6g. Aerators are model specific and they are not interchangeable. We have reached out to you directly to further assist you with this matter! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Joe, Thank you for your question regarding our Delta Faucet RP53998. The correct aerator is RP90248. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi JB 607, Thank you for your question. the RP53998 aerator does not come with an aerator wrench. You will need the RP52217 aerator wrench for this aerator. Here is the link for the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP52217 Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Nick, Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. This Delta Faucet model 19802TZ-SP-DST Lenta™ Single-Handle Pull-Down Kitchen Faucet With Touch2O® Technology In Spotshield Stainless utilizes the RP60248 aerator and wrench. Please see the following link for more information. https://www.deltafaucet.com/parts/product/RP90248.html Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hello Keys, Thank you for your question! I am happy to help you! The Delta RP53998 aerator does not come with an aerator wrench. You will need the RP52217 aerator wrench for this aerator. Here is the link for the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP52217 Please contact us back for any further questions. Best Regards, Nicole