Llave para baño de una manija en cromado

Thank you for your question. Model #553LF currently has the option to purchase the RP63970 (6" escutcheon) seperately.

Hello Andy4567, Thank you for your question. The Delta Vero Lavatory 553LF faucet must be installed with the handle on the right. The handle pulls out, away from the body to turn on and give cold water. Pull the handle towards you to get hot water. Best regards, Tanya

Thank you for your question, Bobs! I am sorry to hear that you are experiencing splashing from your Delta 553LF faucet. We do not recommend removing the stream straightener as this part is not designed to be easily removed. Instead, you can soak a rag in a 50/50 solution of white vinegar and water and apply around the spout for an hour or even overnight to help break up any debris that maybe causing the splashing issue. We would also recommend either using a low gallons per minute flow regulator such as part number RP73838 or simply turning the supply lines down halfway or until the splashing stops. https://media.deltafaucet.com/PartsDiagram/DPD-L-553LF_A.pdf Best Regards, Rosanna

Thank you for your question. Delta Faucet model # 553LF may have a splash effect depending on the size and shape of your sink. The easiest way to combat this is to turn down the force of water coming out of your faucet.

Hi, Sydney! Thank you for your question. The Delta 553LF faucet handle pulls out, away from the body to turn on and give cold water. Pull the handle towards you to get hot water. The flow restrictor in the faucet is non-removable. The stopper for the drain assembly is a push pop up. Best Regards, Rosanna

Grit, Thank you for your question. The faucet could be installed with a 5.5" vessel sink. However, the spout will drop below the rim of the bowl at 5 1/4" above the deck surface. The vessel version of this faucet is model 753LF. The end of the spout on this model is 9 9/32" above the deck. Please refer to the Technical Specifications linked below. https://media.deltafaucet.com/SpecSheet/DSP-L-553LF%20Rev%20E.pdf Best regards, Jon

Thank you for your question. Delta Faucet model # 553LF-SS has a push-pop assembly for the drain.

Dear Bryan, Thank you for your question! Yes, the RP73838 (1.0 GPM flow restictor) is still available for ordering for the Delta Vero Lavatory 553LF-CZ faucet. https://media.deltafaucet.com/MandI/86513%20Rev%20D.pdf Best regards, Tanya

Hi Angie, Thank you for your question. The base of the model 553LF-SS faucet measures 1-7/8". The recommended hole size is from 1-5/16" to 1-1/2". Here is a link to the spec sheet for the model 553LF-SS that shows these and other important dimensions. http://www.deltafaucet.com/customersupport/documentation/553lf-ss.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper Thanks, Dave

Thank you for your question. Delta Faucet makes pop-up assemblies with a flange to meet industry standard measurements of 2.11 inches.

Thank you for your question, Laney Interiors! The Vero collection is unfortunately not available in Matte Black at this time. Below is a link to similar models that are offered in this finish. https://www.deltafaucet.com/bathroom/sink-faucets/single-hole?facetFinish=matteblack Best regards, Edward

Thank you for your question, MichiC! Yes, a grid strainer can be used with model 553LF-RB. We manufacture 2 grid strainers for lavatory faucets. RP47648RB is the grid strainer without overflow holes. RP6346RB is the grid strainer with overflow holes. I have included links to both drain assemblies, for you to refer to. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP47648RB https://www.deltafaucet.com/parts-product-detail?modelNumber=RP6346RB Best Regards, Benjamin

Hi, Frank! Thank you for your question. To remove the stream straightener in the Delta 553LF-SS Faucet, simply pull the stream straightener straight down and out with needle nose pliers. Best Regards, Rosanna

Dear AmandaM, Thank you for your question. We do recommend applying a bead of silicone to the underside of flange of the drain assembly, for installation. This help creates a tight seal to the sink hole. Best regard, Tanya

Hi, SC77! Thank you for your question. We do not have any recommendations for smudge resistant products. Here is a link to the cleaning and care information for our faucets: https://www.deltafaucet.com/bathroom/showering/showerdoors101/care--cleaning Best Regards, Rosanna

Thank you for your question, Maz. The faucet must be installed with the handle on the right. Best regards, Jon

Hello Reno 2020 2021! Thank you for your question! We will be happy to help you today! The Delta Vero 553LF model does come with the optional escutcheon. The Delta escutcheon RP63970 is 1.88 inches from front to back and is 6 inches long. Please contact us back for any further questions. Best Regards, Antoine

Hello Jenna, Thank you for your question! We apologize for the calcium build-up you are experiencing. We understand how frustrating this can be and will be happy to help you! To remove the stream straightener from the Delta Faucet Vero® Single Handle Bathroom Faucet In Chrome MODEL#: 553LF shut off the water supplies. Pull out the stream straightener with a long nose plier. Pull out the stream straightener slowly to avoid damage. Clean the stream straightener then press it back in place into the spout. If additional cleaning is needed, we recommend using a 50/50 solution of white vinegar and water. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello Valued Customer, Thanks so much for contacting Delta Faucet Company! It is possible this issue can be resolved by cleaning the product. We recommend you try soaking the product in a 50/50 solution of water and white distilled vinegar. This could break up any possible calcium buildup inside. If the faucet exhibits very low flow: SHUT OFF WATER SUPPLIES. Remove the handle, trim cap, bonnet nut, and valve. Remove the adapter using long nose pliers. Remove the flow regulator using an O-ring pick or similar tool. Clean any debris from inside surface of flow regulator. When reinstalling parts, ensure bonnet nut is tightened securely with wrench. Failure to securely tighten bonnet nut with wrench could result in water damage. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Valued Customer, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 553LF Vero® Single Handle Bathroom Faucet In Chrome technical specification sheet can be viewed using the below link. No Delta Faucet lavatory faucets have an 8-9 inch spout reach. We apologize for any inconvenience this may cause. https://media.deltafaucet.com/SpecSheet/DSP-L-553LF%20Rev%20H.pdf Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi Florida faucets, Thanks for your question regarding 553LF! The Stream Straightener (RP76571) can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Our products have a Lifetime Limited Warranty that covers parts and finishes being free of defects in material and workmanship for the original owner/purchaser. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi Rich969, Thank you for your question about the Delta Faucet model 553LF-SS. The drain assembly included with this faucet would be model 33W576SS. The stopper is 33D661. https://www.deltafaucet.com/parts/product/33W576SS.html You can purchase Delta Faucet products at many local dealers and internet sites. If a dealer does not carry a specific item in stock, they should still be able to place an order for you. I recommend using our store locator. https://www.deltafaucet.com/where-to-buy Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello OKIEPOKE, Thank you for your question! I will be happy to assist! Model 553LF has a stream straightener and does not have an option for another aerator. This model has flow restrictors inside of the valve, however, that would be changing the flow rate. Please contact us back if you need further assistance. Best Regards, Kyra

Hello Schmid, Thank you for your question. We are happy to help! The Delta Faucet 553LF does not currently have a model with Touch2O.xt technology. We apologize for any inconvenience this causes. You can view our available faucet with the proximity sensing Touch2O.xt technology here: https://www.deltafaucet.com/bathroom/sink-faucets/touchhands-free Best regards, Bryan

Hi Annalee, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Always blot dry any water from the faucet surface. Allowing water to evaporate on the surface can lead to a build-up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean, soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse the surface thoroughly with water afterward. I have also included a link to our “How to clean your faucet” on our website, please see the link below. https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-clean-a-faucet Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Jack, thank you for your interest in the 553LF! Cataloged Models and Creations can take 1-3 weeks to ship. Special Model's lead time will be determined when requirements are finalized. Estimated lead time: 3-4 months. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hello kaitie1233, Thank you for your question! I am happy to help you! Our Delta Lavatory Faucet model 553LF takes the stream straightener RP76571, Please see the parts diagram link below. https://media.deltafaucet.com/PartsDiagram/DPD-L-553LF_A.pdf Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hi diyer, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with your Vero® Single Handle Bathroom Faucet In Chrome MODEL#: 553LF. Here is what we can do to resolve your issue for you. We do recommend flushing the valve; It will allow the removal of debris in the lines. Here are the steps for flushing your faucet. Please shut water supplies off before starting this process. You will need Phillip's screwdriver and start by popping the cap off of the handle. Then you would remove your handle with the screwdriver. Please pull the handle off of the cartridge, you will then find the cap and bonnet nut. Both the cap and bonnet nut would be unthreaded from the faucet. The next part you should see is the cartridge, please grab and pull it out. Then, using needle-nose pillars, grab the brass insert and pull it out. Under the insert is the flow restrictor and this is where the blockage would be located, once cleaned follow the directions in reverse for reinstall. Lastly, place the towel behind the back of the handle, then put the bucket over the top of the towel covering the opening in the valve. Have someone turn the cold/hot water supply on for about 30 seconds to a minute. After this, shut the water off and follow the directions above in reverse for the reinstallation of the flow restrictor, cartridge, and handle. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Susan, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Vero® Single Handle Bathroom Faucet In Chrome MODEL#: 553LF can not be installed with the handle on the left-hand side, the spout and handle would not operate properly, I am sorry for any inconvenience this may have caused. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Lewis, Thank you for your question. We are happy to help! To remove the bonnet nut on the Delta 553LF faucet, remove the set screw cover with a small tool and loosen the set screw with a 3/32" hex wrench. With the handle removed and the water supply off, the cap will pull off the bonnet nut and a wrench can be used to remove the bonnet nut. https://media.deltafaucet.com/MandI/86513%20Rev%20E.pdf Best regards, Bryan