Porta papel higiénico en cromado

N.º de modelo: 73850
Porta papel higiénico en cromado
N.º de modelo: 73850
Precio de lista: $6025
CARACTERÍSTICAS DEL PRODUCTO
Complete el estilo de su baño con este porta rollo de papel higiénico con brazo pivotante Lahara. Gracias a Delta, la instalación resulta muy sencilla para los aficionados al bricolaje de fin de semana, ya que se incluye toda la tornillería de montaje e instrucciones de instalación fáciles de entender. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que la tornillería para el baño de Delta está respaldada por nuestra garantía limitada de por vida.
  • Combina a la perfección con la colección para baño Lahara.
  • Se extiende 3 3/4" desde la pared
  • Se recomiendan tornillos para enlucido/yeso con sostenes de plástico o plomo para azulejos/mampostería si no hay bloques de madera disponibles
  • Se incluye toda la ferretería y la plantilla de montaje con el producto
  • Dimensiones una vez montado: 2 in. H x 3-3/4 in. D x 8-3/4 in. W
Documentos y especificaciones
Información de instalación
Altura total:
2
Voltaje:
0
Tipo de válvula:
NA

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Aplicación Delta BiLT
Logotipo de Bilt Intelligent Instructions horizontal

Instalación simplificada. Descargue la aplicación BILT sin cargo para acceder a instrucciones paso a paso interactivas en 3D.

LISTA DE PIEZAS

LISTA DE PIEZAS

Image-T14438 Secondary Image-T14438

Lahara®

Lahara® Accesorios de ducha y bañera Monitor® serie 14

Precio de lista: $219.30
Acabados estándar

T14438

4.47 32
Image-T14238 Secondary Image-T14238

Lahara®

Lahara® Accesorios de ducha Monitor® serie 14

Precio de lista: $170.95
Acabados estándar

T14238

4.50 42
Image-T4738 Secondary Image-T4738

Lahara®

Lahara® Bañera tipo romana con accesorio de ducha manual

Precio de lista: $548.30
Acabados estándar

T4738

4.38 26
Image-Master-73818

Lahara®

Lahara® Toallero en barra de 18"

Precio de lista: $60.50 - $86.35
Acabados estándar

73818

Image-T17T438

Lahara®

Lahara® Accesorios de ducha y bañera TempAssure® serie 17T

Precio de lista: $505.35
Acabados estándar

T17T438

4.17 12
Image-T2738 Secondary Image-T2738

Lahara®

Lahara® Accesorios para bañera tipo romana

Precio de lista: $338.75
Acabados estándar

T2738

4.44 27
Image-T17T238

Lahara®

Lahara® Accesorios de ducha TempAssure® serie 17T

Precio de lista: $479.10
Acabados estándar

T17T238

4.91 23
Image-T17T038

Lahara®

Lahara® Accesorio de válvula únicamente TempAssure® serie 17T

Precio de lista: $438.15
Acabados estándar

T17T038

3.80 10
Image-Master-73846

Lahara®

Lahara® Toallero en aro

Precio de lista: $40.60 - $57.95
Acabados estándar

73846

Image-Master-73835

Lahara®

Lahara® Percha para bata

Precio de lista: $27.15 - $38.65
Acabados estándar

73835

Image-Master-73824

Lahara®

Lahara® Toallero en barra de 24"

Precio de lista: $66.00 - $94.65
Acabados estándar

73824

Discontinuado
Discontinuado
Image-3538
Discontinuado

Lahara®

Lahara® Llave para baño de extensión de dos manijas

Acabados estándar

3538

5.00 3
Image-T17038 Secondary Image-T17038

Lahara®

Lahara® Accesorio de válvula únicamente Monitor® serie 17

Precio de lista: $192.35
Acabados estándar

T17038

4.42 53
Discontinuado
Discontinuado
Image-538
Discontinuado

Lahara®

Lahara® Llave para lavamanos de combinación de una manija

Acabados estándar

538

4.00 1
Image-T17438 Secondary Image-T17438

Lahara®

Lahara® Accesorios de ducha y bañera Monitor® serie 17

Precio de lista: $252.35
Acabados estándar

T17438

4.16 57
Image-T17238 Secondary Image-T17238

Lahara®

Lahara® Accesorios de ducha Monitor® serie 17

Precio de lista: $225.20
Acabados estándar

T17238

4.36 89
RESEÑAS
Rated 5 out of 5 by from Quality product! Very pleased with this holder. It replaced one that was a much lesser quality and I couldn't be happier.
Date published: 2023-11-06
Rated 4 out of 5 by from Hinged paper holder Decent quality and works well.
Date published: 2023-09-08
Rated 5 out of 5 by from GREAT TP Holders! Really like the look and how to replace the TP roll with these holders! Ordered one In Champagne Bronze and the other in Satin Nickel. Couldn’t be happier.
Date published: 2023-09-04
Rated 1 out of 5 by from Terrible quality control I bought two of these in chrome through my general contractor. I was stuck installing them. After spending an hour trying to get 2 of these poor quality toilet paper holders mounted I can see why my contractor lets installation to the homeowner. I opened the first to find the 20 plus finish blemishes in the chrome, looks like a 50 year old corroded fixture new out of the box. I moved on to the second one and found the finish to be better. However if you install the unit per the provided instructions with a 6-5/16" center to center spacing on the brackets the latch side of the bar will not fully seat on the mating pin. I double checked my brackets and they are precisely 6-5/16" apart. If you try to drill out the holes of the mounting bracket as I did, this does not provide more adjustability because bevel sidewalls of the bracket force it to remain centered on the screw head. Delta quality control is lacking! 4 holes in a new wall and a fixture that cannot be properly aligned let this long time customer saying never again Delta. The latch side has a cylindrical post mating with a V notch which provides no forgiveness for errors in Delta mounting instructions. The center to center distance actually needed to be a shade less than 6-1/4".
Date published: 2023-08-15
Rated 2 out of 5 by from Impossible to Line Up Correctly This holder is heavy and solidly made. The champagne bronze finish is nice. We bought a house with this whole line of hardware installed in four baths, and all the other pieces are holding up well. The down side of this tissue holder is that it's next to impossible to get aligned when installing. It's nice in that you don't have to deal with a spring-loaded roll holder when replacing tissue, but the lever lifting up the way it does means getting it aligned to fit together well is difficult. If you change the tension on the hex screw connecting the holder to the rods (which you have to do in order for the lever to be loose enough to replace tissue rolls), the alignment changes. If you change the position of the rods, the alignment changes. On all the holders in our house, because of this issue the right side where the holder lever sits on the rod doesn't align and fit together flush, kind of ruining the sleek look. I would have loved to have replaced them all with the Trinsic line, but Delta only makes that tissue holder facing one direction. Delta, you can do better with these tissue holders!
Date published: 2023-01-20
Rated 5 out of 5 by from Toilet paper holder Good design with nice finish
Date published: 2022-10-29
Rated 2 out of 5 by from Poor finish I like the holder overall. First holder had finish issues. Didn’t have time to return because of remodel time. Order a second holder and it had same finish issues.
Date published: 2022-04-27
Rated 5 out of 5 by from New build New build have not installed yet.
Date published: 2022-04-24
  • y_2024, m_5, d_8, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_39
  • loc_en_US, sid_73850, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Preguntas y respuestas

Is this a pivoting arm or a spring loaded rod

Delta's site says pivoting arm yet online retailers looks like spring loaded rod
Asked by: Bolivarspeck
Hi Bolivarspeck, Thank you for your question. All of the model 73850 tissue holders currently being manufactured are the pivoting arm version. Online retailers may still have spring loaded versions in stock. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

What size hex wrench is needed for the set screws on the Delta Lahara (78350) pivoting toilet paper holder?

Asked by: Donna
Hi, Donna! Thank you for your question. The Delta 73850 tissue holder uses 5/64" Allen wrench. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Where can we buy the mounting bracket? we have lost one, the part has 1321 stamped on the back of it. the holder is part 73850.

Asked by: Tomb
Thank you for your question. Unfortunately, the mounting bracket is not currently available separately. Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

Has the pivoting arm design changed in recent years? Does just the bar that holds the paper flip up, or does the knob on the end come with it. In other words, are you slipping the paper roll over the thin bar or over the knob at the end of the bar?

Asked by: Gene G
Thank you for your question, Gene G! This toilet paper holder has been redesigned with a pivoting arm that flips up. The toilet paper roll will go over the knob at the end. If you have questions or need further assistance with this repair, please feel free to contact us directly. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

One of the reviewers stated that a roll of toilet paper would not fit on the pivoting arm. What is the diameter of the end of the arm?

Asked by: mem05
Just had installer put this in. Can't find a diagram or instructions on how to use this thing. Arm does pivot, but toiler paper roll diameter does not easily fit over end of pivot arm. Extremely disappointed with this product. Not useable.
Answered by: ccNH
Date published: 2024-03-28

What is the size of the set screw that holds the tissue holder to the wall flange. I purchase three of these and each one is missing one of the set screws.

Asked by: PTG1
Hello PTG1, Thank you for your question regarding the Delta Lahara® Tissue Holder and I am happy to assist you today. The thread size for the set screw for this model is 8-32 x 3/8, Cone Point, Hex Socket. If you could please refer to the email I sent to you or if you could give us a call at 800-345-3358, we will do our best to rectify this issue for you over the phone. Thank you, Brandy Delta Faucet Company Customer Service
Answered by: Brandy
Date published: 2024-03-28

Does the arm pivot up without the end post coming up? That's not evident in the online photo.

I have the other Lahara bath and light fixtures and love them. I need to see a picture of the arm up to make sure paper will slide onto arm.
Asked by: marietheo
Hi Marietheo, Thank you for your question. The end of the endpost for the Lahara paper holder is part of the pivoting arm that moves. I have attached a picture of the model 73850-RB below. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Size of pivoting arm?

In one of the reviews it was mentioned that a toilet paper roll doesn't fit over the end of the pivoting arm. Is this true or will a standard toilet paper roll slide over the end of the arm just fine? I don't know why a toilet paper holder would be made so that it is not convenient to change the toilet paper roll. Want to make sure before I purchase this item... Thanks!
Asked by: Sam
Hi Sam, Thank you for your question. The size of the pivoting arm that that paper roll goes over on the model 738250-SS is 1-1/4". Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28
  • y_2024, m_5, d_8, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_73850, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 29ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.