Accesorios de bañera tipo romana en cromado

Hi Ark, Thank you for your question! This trim will work with any R2707 valve, which uses the RP24096 stem unit and RP4993 seat and spring. Best regards, Jon

Hi, aphbc! Thank you for your question. To determine if the BT2710 will retrofit on your current valve body, you will want to look at your current spout assembly. If your spout assembly has a small set screw located in the back of the spout, instead of the front where the water flows from, the new trim will retrofit on the current valve body. If the set screw is located in the front of the spout where the the water flows from, this will not retrofit on your current valve body. If you should need anymore assistance to determine if your valve body will be able to retrofit this trim kit, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna

Hi Steve, Thank you for your question. The model T2710 uses the anti-swivel pin. No other models will use the pin or cover the hole for the anti-swivel pin. http://www.deltafaucet.com/bath/details/t2710.html Best regards, Tanya

Thank you for your question, Pierson96! The Delta roman tub trim T2710 should cover the existing holes on your fiberglass tub. If this is not an option, a fiberglass repair kit or silicone sealant may also be used. We do not have escutheon plates for a roman tub trim and I apologize for any inconvenience this may cause. https://www.deltafaucet.com/bathroom/product/T2710 Best regards, Edward

Thank you for your question, DrRon! The stem unit assemblies can be switched out for the RP24096 stem assemblies which are metal and designed to work with set screws that come in from the side. Below is link to our roman tub trims in our Stainless Steel finish which is almost identical to Brushed Nickel. https://www.deltafaucet.com/bathroom/bathing/tub-fillers?categories=Delta_Bathroom_Bathing_Tub+Fillers_Roman+Tub&facetFinish=stainless&facetFinish=spotshieldstainless Best regards, Edward

Hi Honeystoner, Thank you for your question. Current trim kits will work on existing Delta valves if the original spout is attached to the valve with a set screw on the back. Best regards, Jon

Thank you for your question, Bill! Model BT2710-SS has a spout reach of 6 7/8" (176 mm). It does not have a longer spout that can be substituted. You may want to look at some other models if a longer spout is needed. This information can be found on the technical specification sheet under the documents and specs section for each models product page. Best regards, Edward

Thank you for your question. If you look on the back of your existing spout of your 2710/2711 model and there is a set screw on the back of the spout, then you will not need to replace your existing rough in valve. Any of the Delta Faucet 3-hole installations will work with your existing valve. If there is not a set screw, then you will need to replace the valve with Delta Faucet model # R2707 and any of the trims.