Tubo de salida para bañera - Sin desviador en cromado

Hello Chance, Thank you for your question! I would be more than happy to assist today. When installing a slip-on tub spout, the tubing should be cut 1 1/2 -- 2 3/4 from the finished wall. Please contact us back for any further questions. Best Regards, Kayla

Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! This tub spout has a slip-on tub spout. Please reach out with further questions. Best Regards, Kayla

Hello Valued Customer, Thanks so much for contacting Delta Faucet Company! The FOUNDATIONS® Tub Spout MODEL#: RP64722 will thread onto a 1/2" IPS nipple that extends 3 7/8" – 4” from the wall. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Mike! Thank you for your question and we are happy to help! For the Delta RP64722 you may refer to the maintenance and installation sheets linked below: https://media.deltafaucet.com/MandI/X00041261_-.pdf With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hi Carole, thank you for contacting Delta Faucet Company! The removable threaded adapter can be removed why threading counterclockwise out of the tub spout. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hello Chas, Thanks for the question. The diameter of the RP64722SS tub spout at the wall is 2 1/2". Best Regards, Yvette

Hello Britman, Thank you for your question, I would be happy to help. Unfortunately the 12" spout is the only tub spout option for the T5776-SSWL, the RP64722SS will not fit. Please contact us back for any further questions or concerns. Best Regards, Nicole

Hello Russell, Thank you for your question, I would be happy to help you. The RP64722OB is a slip on connection, If your looking for a copper connection I would advise to use RP61357OB. Please contact us back for any further questions or concerns. Best Regards, Nicole

Hi Billy, thank you for your interest in the RP64722SS! The tub spout Slips onto 1/2 in. C.W.T. also includes a removable threaded adapter for 1/2 in. IPS Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi KByrd, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Foundations® Tub Spout - Non-Diverter In Chrome MODEL#: RP64722 recommended pipe length from the finished wall to the end of the threads is 3-7/8" to 4". Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar

Hello Daniel, Thank you for your question about the Delta Faucet model RP64722SS tub spout. I apologize for any difficulty finding the installation instructions. I know that can be frustrating. We are happy to help! The instructions may be located on the packaging for the tub spout. The RP64722SS tub spout can slide onto 1/2" copper pipe, or with the adapter removed thread onto 1/2" threaded pipe. The recommended pipe length from the finished wall to the end of the threads is 3-7/8" to 4". Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan