Accesorios de bañera tipo romana en cromado

Hi JR, Thank you for your question. Once the set screw is removed the spout should slide off. Often times mineral build up will make it hard to remove the spout. We recommend soaking a towel in a 50/50 solution of vinegar and water and wrapping the towel around the screw opening in the spout. Allow the solution a chance to soak in, the longer the better to help break up the mineral deposits. If the set screw is located on the front of your current spout, the new trim will not fit. For the new trims to work on an older rough the tub spout set screw should be on the back of the spout. Otherwise the rough will also need to be replaced. Thanks, Dave

Thank you for your inquiry, Christian! Basically any pair of our handles that start with a H6 in the Stainless Steel finish would be designed to fit our roman tub faucets. Such as the H64SS handle set. Please view the below link for more handle options. https://www.deltafaucet.com/search-results?searchTerm=h6&searchType=Delta_Default#resultPage=0&offset=1333.3333740234375 Best regards, Tanya

Hi MMN, Thank you for your question. Unfortunately our new roman tub trims would not be compatible with the pictured faucet rough in valve. The entire faucet above and below deck would have to be replaced. Thanks, Dave

Hi, Dominick! Thank you for your question. The Delta T2710 Roman Tub Faucet trim can be changed out to any new trim kit we have available, as the set screw is on the back of the spout, just like our new trim kits. Here is a link to our available trim kits in the Brilliance Stainless Steel finish: https://www.deltafaucet.com/bathroom/bathing/tub-fillers?categories=Delta_Bathroom_Bathing_Tub Fillers_Roman Tub&facetFinish=stainless Best Regards, Rosanna

Thank you for your question. Delta Faucet model T2710 should have a set screw at the back of the spout that may be covered up by a button. That button should just pop off and there will be a set screw underneath. Loosen that with an allen wrench and the spout should come off.

Hi CCK, Thank you for your question. The R2707 rough-in valve is only designed to work with Delta Roman Tub trim kits. It will work with any T27_ trim. To browse our select, please click the link below and choose "Roman Tub". https://www.deltafaucet.com/bathroom/bathing. Best regards, Jon

Hi Raj, Thank you for your question. Delta Faucet model T2710 is only available in Chrome. It is not available in the Oil Rubbed Bronze. Thanks. Jody

Hello, Thank you for your question. The RP4993 seats and sprrings is the kit that you need. Best regards, Brandis

Thank you for your question, Bill! Any of our current roman tub trims in the Brushed Nickel or Stainless Steel finish can be substituted provided the set screw placement is in the the back of the spout. Best regards, Edward

Hi, Jimmy! Thank you for your question. The Delta T2710 Roman Tub Faucet is only available in the Chrome Finish. Here is a link the roman tub we have in Polished Brass finish: https://www.deltafaucet.com/bathroom/bathing/tub-fillers?facetFinish=polishedbrass Best Regards, Rosanna

Hi Kris, Thank you for your question. Since the spout is not held in place by a set screw, new trim kits will not work with the existing valve. To use a current trim kit you will need to first replace the rough-in valve with the R2707. Best regards, Jon

Hello Jqs1, Thank you for your question. The stem cartridge assemblies that work with all of our Delta Roman Tub faucets are the RP24096. These stems usually come with rough-in valve assembly. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP24096 Best regards, Tanya

Hello Rick, Thank you for your question. If your current tub spout has a set screw on the back side of the spout, then any of our trim kits that start with a T27 will interchange for you. If your current tub spout does not have a set screw on the back side of the spout, then you would need to install a R2707 rough in valve below your tub decking to be able to use the new trim kits. Best regards, Tanya

Hi, James! Thank you for your question. At this time, the Delta T2710 roman tub faucet only comes in the Chrome finish. Best Regards, Rosanna

Hi Ron, Thank you for your question. The set screw is what holds the spout onto the valve. There may be hard water build up making the spout harder to remove. We recommend soaking a towel in a 50/50 mixture of vinegar and water and wrapping the towel around the spout base and set screw hole. This should help break up the mineral build up and allow the spout to be removed. Thanks, Dave

Thank you for your question. Delta Faucet model # T2710 is held on by the set screw. It should pull straight up. If it does not, there may be mineral deposits built up preventing it from coming out. We recommend using a 50/50 solution of white vinegar and cold water to remove the deposits.

Thank you for question! Just about all of our Roman Tub trims are available in chrome. You would want to make sure the trim you are planning on installing, has a set screw on the back of the spout, if you do not want to change the valve body. We still manufacture model T2710 in the chrome finish, and it does have a set screw on the back of the spout. If you need further assistance, feel free to contact us directly. Best Regards, Benjamin

Thank you for your question, Collete2003! The knob handles can be replaced with any of our H6_ handle sets (link below). https://www.deltafaucet.com/search-results?searchTerm=H6 Best regards, Jon

Hi Maria, Thank you for your question! Once the set screw has been removed, you can pull straight up on the spout to remove it. Some models have an anti-swivel pin that will prevent you from rotating the spout. Otherwise, it may help to swivel it back and forth slightly as you pull up. Best regards, Jon

Hi, Rondo85! Thank you for your question. To verify if a new trim kit will work with your existing valve body, we recommend to look at the tub spout assembly. The tub spout will have a set screw either in the front or back of the spout. If the set screw is in the front, no new roman tub trim will work with the existing valve body. If the set screw is in the back, any new trim kit will fit on the existing valve body. All of our new trim kits have the set screws on the back of the spout so they will retrofit on the original valve body. I hope this information helps. Best Regards, Rosanna

Thank you for your question. Delta Faucet model # T2710 can also use lever style handles. You may purchase model H64 with A64 accents to complete your handles. These handles and accents are ordered in pairs.

Hi, Venven! Thank you for your question. The T2710 roman tub faucet is not available in a brushed gold finish. Here is a link to our Polished Brass and Champagne Bronze finished roman tub faucets: https://www.deltafaucet.com/bathroom/bathing/tub-fillers?categories=Delta_Bathroom_Bathing_Tub+Fillers_Roman+Tub&facetFinish=champagnebronze&facetFinish=polishedbrass Best Regards, Rosanna

Hi Linda, Thank you for your question! If your current tub spout has a set screw on the back side of the spout, then any of our trim kits that start with a T27 will interchange for you. If your current tub spout does not have a set screw on the back side of the spout, then you would need to install a R2707 rough in valve below your tub decking to be able to use the new trim kits. The T2710 and H64/A64 are still available to order. Best regards, Brandis

Hi, Tom D! Thank you for your question. At this time, the Delta T2710 Roman Tub Faucet is only available in the Chrome finish. Best Regards, Rosanna

Thank you for your question, Michael! Model T2710 uses the R2707 rough in valve which will accept our current trims provided the set screw is located in the back of the spout. Below is a list of our roman tub trim kits in both Polished Brass and Champagne Bronze. https://www.deltafaucet.com/bathroom/bathing/tub-fillers?categories=Delta_Bathroom_Bathing_Tub+Fillers_Roman+Tub&facetFinish=champagnebronze&facetFinish=polishedbrass Best regards, Edward

Thank you for your question, Jaye! Provided the set screw is on the back of the spout, you can update this model to any of our current trim kits. The closest in style would be BT2710-SS which is in the Stainless Steel finish, a close match to Brushed Nickel. https://www.deltafaucet.com/bathroom/product/BT2710-SS https://www.deltafaucet.com/bathroom/bathing/tub-fillers?searchFilter=true Best regards, Edward

Hello, Patty! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you and I understand how frustrating that can be but I will be happy to help! Unfortunately, we do not currently offer a tub spout with a diverter to accommodate a roman tub trim kit. We apologize for any inconvenience this may have caused. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hello Susie, Thank you for your question about the Delta Faucet model T2710 Classic Roman Tub Trim. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! Yes, In general, if the old Delta roman tub spout has a set screw on the back at the bottom securing it to the spout adapter rough, the old trim can be replaced with a new trim. Older Roman tub end valves were adjustable in height. You want to make sure the valve is set high enough in the deck so that new handles, which might be taller than older handles, can be assembled to the valve stems and not scrape on the handle bases. The minimum height from deck to top of the stem should be 1 ¾”. Pivotal T2799, T4799 handles are not compatible with older roughs. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hello Bill, Thank you for your question. We are happy to help! The Delta Faucet model number T2710 and T2705 Roman tub trim kits are both chrome finish and currently designed to install to the R2707 deck mount valve rough. If your faucet trim is installed to a R2707 valve rough, The T2705-SS is available in a brushed stainless finish. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan