Conjunto interior para desviador de 3 y 6 funciones

Thank you for your question, Todd. The if you are only using two ports, the right port must be capped. However, you can plumb it from the left port to the right side as needed. Best regards, Jon

Thank you for your question, gabe! The R10000 MultiChoice Universal valves are named so because they are able to accept any of the current MultiChoice valve trim cartridges, allowing you to easily change the style and function of your shower. These cartridges are included in the shower trim and will depend on the features you are needing. A 13/14 series has only one handle that controls volume and temperature together whereas a 17 series trim has a volume control and temperature knob for independent control. A Tempassure Thermostatic cartridge can further monitor the temperature within a safe ±3.6° F (±1.7° C). https://www.deltafaucet.com/shower-cartridges Best regards, Edward

Hi, Mike! Thank you for your question. We do not advise to install a tub spout assembly to the Delta R11000 Diverter Rough In as the tub spout will not have a positive shut off while the shower components are in use. We do apologize for any inconvenience this may cause. Best Regards, Rosanna

Thank you for your question, Joseph! Those valves are correct for the setup you have described. If you have two showering components (shower head and hand shower), the matching diverter trim will be model number T11853. https://www.deltafaucet.com/parts-product-detail?modelNumber=T11853 Best regards, Jon

Hi Ki@m, Thank you for your question. The tub spout that comes with the model T14486-SHQ is a diverter tub spout. Using that tub spout you would cap the right side or 3 o-clock port on the R11000 diverter rough and plumb the rain shower head out of the 12 o-clock port and the hand shower from the 9 o-clock port. The shower port from the R10000 faucet rough would be plumbed to the 6 o-clock port on the R11000 diverter rough. The T11886 diverter trim will allow you to operate each showerhead individually or both at the same time. Thanks, Dave

Hi Curt, I'm sorry to hear about that and would be happy to answer your question. The bottom port of the R11000 valve must be connected to the water supply in order for the diverter to work properly. If this was done, you may still install the trim, but it will be upside down as well. If the top port of the diverter valve was connected to the supply, it will not work. Best regards, Jon

Hi Tim, Thank you for your question. The T11892 is a 3 setting 2 port diverter trim that is only made to operate 2 features, not the 3 that you have plumbed to the diverter valve. You can order the RP51919 6 function diverter cartridge and switch it with the existing cartridge to have all of the features, showerhead, tub spout, and hand shower work properly. Thanks, Dave

Hi scdavis, Thank you for your question. The T11853 is the 3 setting diverter trim, and the T11953 is the 6 setting diverter trim in the Vero collection. Thanks, Dave

Hi scdavis74, Thank you for your question. Your breakdown of the functions of the 6 setting diverter is correct. There will be three individual and 3 shared positions. Thanks, Dave

Hi, JZee! Thank you for your question. The Delta R11000 is a diverter rough. The Delta Monitor T14067-BL Valve Trim Kit will need to be installed onto a Delta MultiChoice Universal R10000 Rough Valve Body. All of our rough inlets and outlets have 1/2" connections. We do apologizes for any inconvenience this may cause. Best Regards, Rosanna

Thank you for your question, Alice! Any Delta 3 setting or 6 setting diverter trim that has a model number that starts with T118 or T119, will work with the R11000 Diverter rough. Best Regards, Benjamin

Hi Joe, Thank you for your question! The right port needs to be capped off in a 3 setting application. If you cap the left port the water will not be diverted properly. The bonnet nut is to hold the diverter cartridge into the valve body. Best regards, Brandis

Thank you for your question. Delta Faucet model # R11000 is used when adding a handheld to a tub and shower setup. We recommend matching a 3 function diverter trim with your tub/shower set-up. All of your cartridges will be included with your trim models.

Thank you for your question, RAZZ! Unfortunately, we do not currently offer a version of the R10000-UNWSHF and R11000 that comes with PEX fittings. However, you can adapt the R10000-UNWSHF and the R11000 diverter valve for 1/2" PEX. Best Regards, Benjamin

Hello Ed, Thank you for your question. You will need to order the RP51919 6 setting cartridge. Best regards, Brandis

Hi Cory, Thank you for your question! We recommend to use a strap wrench if it does not come off by hand. Best regards, Jon

Thank you for your inquiry, Joey Beans! Yes, the Delta R11000 3/6-Setting Diveter valve would be install above the main MultiChoice Universal rough-In R10000-UNBX valve. If installing the Delta Vero 3-Setting Diverter T11853 you would need to cap off the right port of the diverter valve. This will allow you to run the shower head and hand shower individually or together. Best regards, Tanya

Thank you for your question. It actually is a pretty easy fix to upgrade from the 3-setting diverter to a 6-setting diverter. The only thing you will need to replace is the diverter trim. The valve is the same valve.

Dear Greg, Thank you for your question. The Delta R11000 is a 3 / 6-Setting Diverter valve. You would install this valve, (above the R10000 main valve) if you are adding an extra showerhead, handshower or body sprays to your bathtub/shower unit. If you are just adding one extra showering unit, you would need to cap off the right side of the R11000 diverter valve. Best regards, Tanya

Hi marc, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet 3- And 6-Setting Diverter Rough MODEL#: R11000 will allow for installation with PEX piping. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Customer! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. There is no copper pipe that separates the R11000 from the mixing valve. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Hello Jimbo, Thank you for your question. We are sorry to hear there is an issue with your Delta Faucet diverter valve, and we are happy to help. We would recommend confirming that the R11000 valve rough was installed with the word "UP" facing upward and that the right side of the valve is plugged for use with two shower features. Next, remove the diverter cartridge and flush water out of the valve to remove any debris. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hi Marcey, thank you for your interest in the R11000! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Jermic, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. The Delta Faucet 3- And 6-Setting Diverter Rough MODEL#: R11000 can use a three or six-function diverter cartridge. The cartridge will ship with the trim kit you purchase. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello konadog! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! You will need to use the Delta Faucet RP51919 6-function diverter cartridge in order to have a shared function between the handshower and showerhead. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hello Kruk, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model R11000 3- And 6-Setting Diverter Rough is compatible with a tub spout, but can reduce the flow to the spout because the outlet of the diverter rough does not receive as much pressure as a tub spout port on a regular shower rough-in valve would. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hello Customer, Thank you for your question. I have sent an email so we can gather some more information. Please contact us back with any further questions. Best Regards, Emma Phone: (800) 345-3358 | Email: customerservice@deltafaucet.com

Hello Lisa! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta Faucet 3- And 6-Setting Diverter Rough MODEL#: R11000 will work for two showerheads. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Hello Rod1626, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. Please follow the below link to see the 4 available cartridges that are compatible with the Delta Faucet model R11000 3- And 6-Setting Diverter Rough. The cartridges will be located at the end of the page of products. https://www.deltafaucet.com/search-results?q=diverter+cartridge&lang=en_US Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi Sheri, Thank you for your question about the Delta Faucet R11000. This diverter valve is not recommended for use with a tub filler that uses R65700 or R3500-WL valves. These valves are not designed to add a diverter after the water is mixed. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist