Montaje flexible para dos manijas

Dear Ali Fl, Thank you for your question. Yes, If your current tub spout has a set screw on the back side of the spout, then any of our newer Delta trim kits that start with a T27 will interchange for you. However, the spout assembly may partially cover the anti-swivel pin hole in the deck. Best regards, Tanya

Dear Sam, Thank you for your question. Yes, the Delta Windemere Roman Tub trim kit BT2796 will work on the R2700 rough-in valve assembly. https://media.deltafaucet.com/SpecSheet/DSP-B-BT2796%20Rev%20B.pdf Best regards, Tanya

Hello Ali! The only determining factor on the trim you can replace this model with, would be the set screw placement. If the set screw is on the back of your spout, then any current T27 roman tub trim will work with either rough in valve. If you have an anti swivel pin in the front, many models could also work, however they may not fully cover the existing hole in the deck. The R2707 utilizes jack screws which can be adjusted above the deck. If you do not see a silver washer with a screw below it after removing the handles, then you have the R2700 rough valve. Best regards, Edward

Hi, Dave! Thank you for your question. Any of our handles that start with 'H6' will work with our roman tub unit. Here is a link to these handle options: https://www.deltafaucet.com/search-results?searchTerm=h6 Best Regards, Rosanna

Thank you for contacting us, Dalz102! The Delta R2707 works with any of the current Roman Tub Trims. Best Regards, George

Hi Jon, Thank you for your question! The R2700 rough in valve body will work for the PTT298510 roman tub trim. Best regards, Brandis

Hi, Denny! Thank you for your question. The flow rate for the roman tub unit will be determined by the trim kit that is used for the unit rather than the rough valve body. If you should need further assistance with this, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna

Hi Stu, Thanks for your question. The R2700 has a maximum deck thickness of 1 1/4", but can be extended up to 2 1/4" with the RP18504 extension kit. The mounting nuts must be tightened from below the deck. The R2707 has a maximum deck thickness of 2 1/2". The mounting washers can be tightened from above the deck using the jack screws. Thanks, Jon

Hi MattB, Thank you for your question regarding our Delta Faucet R2700. The threads are size 1.0-14 UNS-2A. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Mwskrcn, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet DELTA®Two Handle Flexible Mount MODEL#: R2700 repair parts do not come in a kit. Please view the parts breakdown in the link below. https://media.deltafaucet.com/PartsDiagram/R2700__47793%20Rev%20C.pdf Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar

Hi Josh, Thank you for contacting Delta Faucet Company! We will need more information to better assist you. Please watch out for an email from customerservice@deltafaucet.com. Best Regards, Nicole Digital Communications Specialist

Hello Murray, Thank you for contacting us, I would be happy to help you. Our R2700 will accept any of our roman tub trim kits in BL, please see the link below and use the Filter on the right hand side to select matter black. https://www.deltafaucet.com/bathroom/bathing/tub-fillers Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hello ftom! Thank you for your inquiry. I am happy to assist you. The Delta Dorval Roman tub trim is not compatible with the Delta R2700 Rough-in. It may be used with the R2707 Rough-in valve. With any further questions or concerns, please do not hesitate to reach out to us directly! Best Regards, Carrie

Hello ftom! Thank you for your question. I am happy to assist you. The Delta Dorval Roman tub trim is not compatible with the Delta R2700 Rough-in. It may be used with the R2707 Rough-in valve. Please contact us if you have any other questions! Best Regrards, Antoine

Hello Valued Customer, Thank you for reaching out to Delta Faucet Company! No, our R2700 Roman tub rough-in valve is not designed to be installed in the wall, and is also not compatible with wall-mounted trim kits. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hello Magos, Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you. You can purchase the Delta Faucet Two Handle Flexible Mount MODEL: R2700 online, locally, or over the phone. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy To order parts over the phone, please call us at 1-800-345-3358, Monday through Friday from 8 am to 8 pm and Saturday from 9 am to 6 pm Eastern Standard Time. We accept Visa or MasterCard. Higher than normal demands on global supply chains may cause shipping delays. We appreciate your patience. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello Mike, Thank you for your question! We are pleased to help you. You would be able to use the Delta Rough-In Roman Tub Fixed Mount R2707 for the Delta Dryden Roman Tub Trim. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello Gene, Thank you for your question! I am happy to help you! I have attached the link below to the parts diagram of the Delta R2700, The stems needed are RP24096. https://media.deltafaucet.com/PartsDiagram/R2700__47793%20Rev%20C.pdf Please contact us back for any further questions. Best Regards, Nicole

Hi Randy, Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! This R2700 tub filler valve with a Victorian tub filler trim uses RP24096 stem and RP4993 seats and springs. A Victorian sink faucet 3555 Series also uses RP24096 and RP4993. A Victorian sink faucet 35955 Series uses RP47422 stems. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello lynnahoff, Thank you for your question about the Delta Faucet model R2700 Two Handle Flexible Mount Rough-In. I apologize for any difficulty finding this information. We are happy to help! This Roman tub valve is available for orders. We do currently have backorders for this product due to production delays. We are now running multiple shifts to fulfill our backorders and expect to return to normal lead times no later than early June. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hi Andy G, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Two Handle Flexible Mount MODEL#: R2700 has a max deck thickness of 1 1/4" (32 mm) and (2 1/4" (57 mm) Max. If using the RP18504 Thick Nuts. Please see the technical specification sheet below. https://media.deltafaucet.com/SpecSheet/dsp-b-r2700_C.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Todd! Thank you for contacting Delta Faucet Company and we are happy to help. Please contact us directly through a phone call or sending us an email for further assistance in diagnosing your faucet. Best Regards, Carrie

Hello JayDee, Thank you for contacting us, I would be happy to help you. The R2700 has a maximum deck thickness of 1 1/4", but can be extended up to 2 1/4" with the RP18504 extension kit. The mounting nuts must be tightened from below the deck. The R2707 has a maximum deck thickness of 2 1/2". The mounting washers can be tightened from above the deck using the jack screws. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole