Conjunto de cartucho, desviador de 2 funciones, no compartido

Hi Andy, Thank you for your question! The RP71717 will work with the R11000 rough-in valve and T11800 trim. This will eliminate the shared function. Thanks, Jon

Thank you for your question, jojo! The flow rate is determined by the PSI available to the home as well as the trim used. An R10000-UNWS will have a slightly reduced flow because of the stops but should provide approximately 4.5gpm @40 PSI when using a 13/14 and 17 series trim. The same trims can provide up to 6.5gpm if the home has 80PSI. The 17T Thermostatic trim kits will provide approximately 5.5gpm - 7.7gpm with this valve body. Please note that the flow rate will be further reduced with the addition of a diverter valve and trim so this will depend mostly on the PSI of the home. Best regards, Edward

Hi, Plumbingconundrum. Thank you for your question. The Delta RP71717 Diverter Cartridge Assembly is a two-setting non-shared cartridge and will only allow one shower component on at once. Best Regards, Rosanna

Hi Amy Sue, Thank you for your question! Without uninstalling the valve the alternative solution would be is to install an RP51919 six setting diverter cartridge. There will be some "dead spots" when switching positions but this will forego the need to replace the valve altogether. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi davidkor, Thank you for your question about the Delta Faucet RP71717 non-shared diverter cartridge. It is not designed to provide more water flow than a shared cartridge. The reason for this part is that some plumbing codes may not allow multiple outlets to run simultaneously. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Sag and Sons, Thank you for your question about the Delta Faucet RP71717. This diverter cartridge would direct the water flow to the left or top outlets. I recommend checking that the hand shower is connected to one of these outlets and that the right side outlet is plugged. A 6-setting shared or 3-setting non-shared diverter cartridge can be used if the incorrect outlet is plugged. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Customer! Thank you for your question and we are happy to help. The Delta RP71717 diverter will work with the Delta T27859 for a 2 setting shower. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hello Grrry, Thank you for your question, I would be happy to help you. The cartridge you would need is RP71718, This is a 3 function non shared. The cartridge will give water from 1 & 3, but it will have a dead spot when handle is in outlet 2. Please contact us back for any further questions or concerns. Best Regards, Nicole

Hi Sag and Sons, Thanks so much for contacting Delta Faucet Company! The Cartridge Assembly MODEL#: RP71717 can be used for a shower only set up. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Sonny, Thank you for your question about the Delta Faucet RP71717 Diverter Cartridge Assembly. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! A non-shared cartridge will have settings for each individual shower feature. A shared cartridge has individual settings and will also have settings that run two shower features at once. For two shower features, use either the RP71717 2-setting non-shared or the RP51918 3-setting shared. For three shower features, use either the RP71718 3-setting non-shared or the RP51919 6-setting shared. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hello Mondo! Thank you for your question! I am happy to help you. This diverter cartridge can be used with the Delta R22000 valve. You cannot cap the left port of the diverter valve. It will cause the diverter to not work properly. Plumbing to this diverter valve must be done to the right port if only 2 accessories are being used. Please contact us back for any further questions. Best Regards, Frank