Conjunto de cartucho, desviador de 3 funciones, no compartido

Thank you for your question. Delta Faucet model # RP71717 is available to order now. It will not ship until 7/16/2012. Contact your local retailer or wholesaler to place an order.

Thank you for your question, Waterboy! An R11000 diverting valve is not capable of shutting off the water as this is done with a "mixing" valve like the R10000-UNBX which is not only responsible for mixing the hot and cold water appropriately but also for shutting off the water completely when not in use. The diverter valve is then intended to connect to the top port of this Multichoice valve allowing you to direct the flow of water. https://www.deltafaucet.com/bathroom/product/R10000-UNBX Best regards, Edward

Thank you for your question, Patrick the plumber! In order for all three components to function independently, the Delta 3 Setting Non-Shared Diverter-RP71718 is advised, however there will not be a shared function on these products. For shared functions as well, you will need to use a six-function diverter cartridge RP51919 which will allow the use of each separately as well as three shared settings. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51919 Best regards, Edward

Hi Burt, Thank you for your question! The RP51919 would have additional non-working functions if you are not using the extra outlet. The RP71718 would also have a non-working function and would not allow you to run the jets and shower head together. You will need the RP51918 3-setting diverter cartridge. If you have the T18230 instead of the T18230-XO trim, you will also need the RP51920 sleeve. http://www.deltafaucet.com/repairparts/details/rp51918.html http://www.deltafaucet.com/repairparts/details/rp51920.html Best regards, Jon

Hi deave, Thank you for your question. The 3-Setting Non-Shared Diverter Cartridge is designed to work with a 6-Setting Diverter Trim. However, you may use it with a 3-Setting Trim, but the handle will not align with the marks on the escutcheon plate in all three settings. Best regards, Jon

Thank you for your question, Irish Don! Any restriction from a diverter trim would be minimal depending on the trim kit used and PSI to the home. For example, an R10000-UNBX rough in valve is capable of producing 6.3 gpm at 60psi whereas the high flow version, R10000-HF will produce approximately 7.3gpm. Adding an R11000 diverting valve will lower this to 5.3 gpm or 6.3 gpm respectively. For the maximum 10.7 gpm, a 17T series is recommended with a high flow rough-in valve giving you about 9.7gpm. https://www.deltafaucet.com/design-innovation/innovations/shower/tempassure-valve--monitor-valve Best regards, Edward

Hi Kathy, Thank you for your question. Since the diverter is plumbed from the right you will want to install the RP51919 6 function diverter cartridge. There will be some duplicate settings, and some blank, but you will have access to all of the functions the 3 function cartridge would give you. Thanks, dave

Hello ScottG, Thank you for your question! I will be happy to assist. T27859 comes with a 3 setting 2-port cartridge. If you are using all ports of the diverter, the 3 function NON-shared diverter is RP71718. This information is also included with the Parts diagram for the trim. Please contact us back if you need further assistance. Best Regards, Kyra

Thank you for your question, Nc toolman. I am sorry to hear your hand shower is leaking. RP71718 is a diverter cartridge that would switch between three shower functions and is not used to turn off water. That would be done by the mixing valve. Please contact us directly and we would be happy to help with your issue. Best regards, Bryan

Hi JamesBL, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Cartridge Assembly - 3-Setting Diverter - Non-Shared MODEL#: RP71718 is not recommended for a tub spout installation, due to the limited flow rate. If you currently have an R10000-UNBX and T17059 installed, we would advise plumbing the tub spout from the bottom port and a shower head from the top port. This will allow for a full flow of 8-10 GPM for the tub spout, please see the maintenance and installation instructions for the R10000-UNBX below. https://media.deltafaucet.com/MandI/50353%20Rev%20L.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Jtadh, Thank you for reaching out to Delta Faucet Company! When the handle is pointing straight up using our RP71718 3-setting non-shared diverter cartridge, you should get water from the top port. Please refer to page 4 in the link below to see the other handle positions. https://media.deltafaucet.com/MandI/73490%20Rev%20D.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Mark, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Cartridge Assembly - 3-Setting Diverter - Non-Shared MODEL#: RP71718 can be swapped out for the 6 setting diverter cartridge RP51919, this will allow for the top and right port to be used, however, you will have a dead spot with no water flow. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Steady, Thank you for your question about the Delta Faucet RP71718 Cartridge Assembly - 3-Setting Diverter - Non-Shared. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! No, we would not recommend using a tub spout with this diverter cartridge and an R22000. The flow rate would be too reduced for a tub filler. This is a cartridge for using three different shower features, without any shared settings. The bottom outlet of the R10000 MultiChoice valve rough, with a tub and shower trim, would be recommended for a tub spout. The R22000 valve does not include a tub outlet. https://www.deltafaucet.com/bathroom/product/R10000-UN.html Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hi Jason74, Thanks so much for contacting Delta Faucet Company! The RP71718 would allow for 3 items to be used separately and not shared. I have included a link to the Where To Buy section on our website below, this can be purchased locally or online. https://www.deltafaucet.com/where-to-buy Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Mata, Thank you for your question, Jimbo. With a 3-setting diverter, the top and left port must be used and the right-side port should be capped off. To allow water to go to the right port, you can install a 6-setting diverter cartridge, RP51919. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51919 Best Regards, Renna

Hi Score27, Thank you for your question about the Delta Faucet RP71718. This cartridge does not include shared settings. The cartridge RP51918 would be used for two individual settings and one shared setting. If the shower only has two shower features (shower head and hand shower), then the right side port of the diverter rough should be plugged. If not, the 6-function cartridge RP51919 can be used, but there will be unused settings. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello, Mathking! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! You will need the Delta Faucet RP71717 2-function non-shared diverter cartridge in order for the showerhead and handshower to operate without both running at the same time. If you wish to have independent control as well as both components run at the same time you will want the RP51918 diverter cartridge assembly. Please see the links below for more information. https://www.deltafaucet.com/parts/product/RP71717.html https://www.deltafaucet.com/parts/product/RP51918.html Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hi Irina, Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! Yes, changing the cartridge will help if the wrong diverter port was plugged. RP71717 can be replaced with RP71718 for non-shared systems without mixed diverter positions. But if you would like to have mixed positions, it would be replacing RP51918 with RP51919. RP71718 or RP51919 is what you would need. They are typically for setups with three shower features, so it will work for your two features, but there will be dead spots on the dial. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Rccc, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Cartridge Assembly - 3-Setting Diverter - Non-Shared MODEL#: RP71718 would work properly to allow 3 items to be used individually, however we do not recommend installing the tub spout from the diverter as it would produce a lesser amount of flow. The tub spout would only produce half flow if plumbed from the diverter, if plumbed from the bottom port of the main rough valve it would produce 8-10 GPM. The RP71717 would allow for two items to be used individually, I have included a link below. https://www.deltafaucet.com/parts/product/RP71717.html Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Jimbo, Thank you for your question about the Delta Faucet RP71718 3-setting non-shared diverter cartridge. We are happy to help! Delta Faucet part number RP71717 is a 2-setting non-shared diverter cartridge for two shower features, without a shared setting. https://www.deltafaucet.com/parts/product/RP71717.html We appreciate your business and look forward to continuing to serve you! Best regards, Bryan

Hi Troubled, Thanks for your question regarding RP71718! This is a 3-setting diverter cartridge that is used with our R11000 diverter rough, with the proper model number I can not say for sure this would fit your model. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi Phil, Thank you for your question about the Delta Faucet RP71718 Cartridge Assembly - 3-Setting Diverter - Non-Shared. We will be happy to assist you as quickly as possible. A two-port, three-function diverter would include the cartridge RP51918. To use the three-function diverter, the port on the right side will need to be capped. If the top port of the diverter valve was capped, a 6-setting diverter cartridge RP51919 or the 3-setting, non-shared cartridge RP71718 can be used. There will be unused positions or dead zones, but the two shower features can be controlled with the diverter. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Joseph, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with your Delta Cartridge Assembly - 3-Setting Diverter - Non-Shared MODEL#: RP71718. Here is what we can do to resolve your issue for you. Low flow is caused by a blockage or debris, and we would recommend flushing. The rough end is not recommended to be installed upside down as it could cause issues with the operation, please start by verifying that the word "UP" is on the top of the valve. I have included some flushing instructions below: Start by turning the hot and cold water off. 1) Remove the handle to the diverter. 2) After removing the handle, remove the trim sleeve. 3) After removing the sleeve, you will need to pull the cartridge straight out. Once the cartridge is removed, you will have an open valve body. 4) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out, much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let it flush for 30 seconds. 5) Re-install the cartridge and re-assemble in reverse of how it was disassembled. Check the full handle rotation. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello fakeituntilyoumakeit, Thank you for your question. We are happy to help! Yes, the RP71718 diverter cartridge has three settings for the three shower features and does not have shared settings. The shared positions would allow only a trickle of water to prevent crossflow. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Yes, the RP71718 is the non-shared 3-setting diverter cartridge that will allow 3 separate components. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist