Single Handle Project-Pack Bathroom Faucet in Chrome

Hi, Dankadon. Thank you for your question. We do not have a recommended distance from the center of the faucet to the drain hole in the sink. The measurement we do recommend for the faucet on the sink is the clearance to back splash which is Min. 2 1/2" (64 mm). https://media.deltafaucet.com/SpecSheet/DSP-L-559LF-PP_E.pdf Best Regards, Rosanna

Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! The lines cannot be replaced with different lines. We do apologize for any inconvenience this may cause. Please reach out with further questions. Best Regards, Kayla

Hi dmhdg, Thank you for your question about the Delta Faucet model 559LF-PP. This faucet includes a drain assembly operated by the lift rod on the faucet. The faucet is ADA compliant. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Sam Ross, Thank you for for question, we are happy to help. This spout of this faucet is indeed 4 1/4". Looking at the specifications sheet where is says 5 1/4", it is referring to the length from the tip of the spout to the back of the handle. Best Regards, Kelley

Hi, pbcd! Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. The Delta Faucet Modern Single Handle Project-Pack Bathroom Faucet In Chrome MODEL#: 567LF-MPU-PP includes a metal pop-up drain assembly. Please refer to the technical specifications sheet for more details, I have attached the link below. https://media.deltafaucet.com/SpecSheet/DSP-L-567LF-PP%20Rev%20G.pdf Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi Lynn, Thank you for your question about the Delta Faucet model 581LF-PP. For models produced after 01/14/2024, an aerator and wrench are RP73003. https://www.deltafaucet.com/parts/product/RP73003 For models produced prior to 01/14/2024, the aerator and wrench are RP91237. https://www.deltafaucet.com/parts/product/RP91237.html Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Leonard, Thank you for your question. We are happy to help! The issue with your Delta 581LF-PP faucet is likely the result of debris in your supply lines or faucet. To flush the unit, we recommend the following: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge, and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hi Terry, Thank you for your question regarding our Delta Faucet 79225. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Kevin, Thanks so much for contacting Delta Faucet Company! Please refer to the parts diagram and your box to find the correct part number for your product. I have attached the link to the parts diagram below. https://media.deltafaucet.com/PartsDiagram/DPD-L-567LF-PP%20Rev%20D.pdf Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Chris, thank you for your interest in the 567LF-PP! Please view the link below for instructions on how to replace the cartridge, https://media.deltafaucet.com/MandI/64211%20Rev%20A.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi pbcd, Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Project Pack lavatory faucets are available in two popular contemporary styles: contemporary round and angular modern. Project Pack faucets are priced competitively, making them an ideal option for project work in key commercial segments. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hello Beau, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 581LF-GPM-PP Modern Single Handle Project-Pack Bathroom Faucet In Chrome includes the Delta Faucet part RP91238 Modern Aerator Assembly And Wrench .5 GPM In Chrome, which has a wrench that can be used to remove the aerator and allow for cleaning. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hello Francheska, Thanks so much for contacting Delta Faucet Company! The Modern Project-Pack Bathroom Faucet Model#: 567LF-PP box dimensions are: Box height 3.0 Box length 16.0 Box width 7.0 Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello NKPM, Thank you for your question about the Delta Faucet model 567LF-PP MODERN Single Handle Project-Pack Bathroom Faucet. I apologize for any difficulty finding this information. We are happy to help! A loose set screw is likely the cause of a loose handle. Remove the set screw cover behind the handle and the screw can be tightened with a 3/32" hex wrench. See the faucet manual for more information: https://media.deltafaucet.com/MandI/85830%20Rev%20D.pdf Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hello! Thanks for the question. I will be glad to help you today. The faucet is made of metal. Best regards, Paul

Hi Barry, Thanks so much for contacting Delta Faucet Company! Yes, these models includes a 4" escutcheon for a three-hole installation. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Kelly, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 581LF-MPU-PP Modern Single Handle Project-Pack Bathroom Faucet In Chrome has a spout length of 5 5/8" from the center of the valve to the end of the spout and a height of 6 7/16" from the counter to the top of the handle when off and 7 7/8" when on. Please see the below technical specification sheet for more information on the above model: https://media.deltafaucet.com/SpecSheet/DSP-L-581LF-PP%20Rev%20E.pdf Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi Harry Bhakta, Thank you for reaching out to Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! The aerator can be removed by threading counterclockwise. If you get full flow after removing the aerator, the aerator may need to be cleaned or replaced if it is damaged. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Larry, Thank you for your question about the Delta Faucet model 567LF-GPM-PP. The aerator is unscrewed counterclockwise. So if looking from above the spout, turn it clockwise. A wrench can be used on the flat parts of the aerator, but a towel or pad should be used between to avoid damaging the finish. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Cins, Thank you for your question! We will be happy to help you today! The Delta 567LF-BLGPM-PP is recommended to have the water land close to the pop-up assembly to prevent splashing. The depth of the sink will also determine if the faucet splashes. Please contact us back for any further questions. Best Regards, Renna

Hello jaye2342, Thank you for reaching out to Delta Faucet Company! No, the supply lines for our 567LF-GPM-PP are not designed to be removed. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Sange! Thank you for contacting us at Delta Faucet! I will be happy to help. Project Pack are competitively priced faucets, making them an ideal option for project work in key commercial segments. Best Regards, Tim

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Our 567LF-PP does not have an option to be extended. We apologize for any inconvenience this may cause. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello rick, Thank you for your question! We are happy to help! The Delta Matte Black finish is an organic finish. Please contact us if you have any questions or need further assistance. Best Regards, Emma

Hi Marc, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with your Delta Faucet Modern Single Handle Project-Pack Bathroom Faucet In Chrome MODEL#: 567LF-PP. Here is what we can do to resolve your issue for you. We do recommend flushing the valve; it will allow the removal of debris in the lines which is causing the low flow. Here are the steps for flushing your faucet: Please shut water supplies off before starting this process. You will need a 1/8” Allen wrench, a towel, and a bucket. 1. Please start but shutting off the water to both hold and cold supplies, and then put the handle in the on position to drain the water from the faucet. (This will also ensure the shut-off is complete off.). 2. Please remove your handle with the 1/8" Allen wrench. There may be a blue/red button cover that can be removed with a sharp nail file or tweezers. 4. Please pull the handle off of the cap, which can be unthreaded from the body. This should only be hand-tight, but if you need to use a tool, we would recommend a strap wrench. (soaking a rag in 50/50 solution and wrapping around anything too tight will help loosen up the threads) 6. The bonnet nut would need to be removed next, unthreading as well. 7. once the bonnet nut is off, then the cartridge can be removed. At this time, I recommend placing all the parts into a bowl for reassembling. 8. Place the towel around the faucet on the counter and the bucket over the valve where you removed all the internal parts. Please turn both water supplies on. Please flush the faucet out for about 30 seconds to a minute. 9. After this, shut the hot and cold supplies off, reassemble and check for the flow and hammer sound. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello jjjcola, Thank you for your question. We are happy to help! Delta Faucet products have a Lifetime Limited Warranty that covers parts and finishes being free of defects in material and workmanship for the original owner/purchaser. For more information, see: https://www.deltafaucet.com/service-parts/warranty Best regards, Bryan

Hello Erika, Thank you for contacting us. I apologize for the issue you are spraying experiencing with your Delta faucet and I am happy to help you. We recommend removing the aerator from the Delta Faucet model 581LF-PP Single Handle Project-Pack Bathroom Faucet using the provided wrench. We would then recommend soaking the aerator in a 50/50 solution of white vinegar and water. After soaking, thread it back into place and ensure the threads of the aerator do not cross-thread with the spout threads. Please contact us directly as we would like to resolve this matter for you at this time. Best Regards, Skyler

Hello, Adrian! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you and I understand how frustrating that can be but I will be happy to help! We offer the Delta Faucet model 759-DST Trinsic® Single Handle Vessel Bathroom Faucet In Chrome which is taller and the spout reach is 1 1/8" longer. Please see the following links for information. https://www.deltafaucet.com/bathroom/product/759-DST.html#undefined https://media.deltafaucet.com/SpecSheet/DSP-L-759-DST_B.pdf Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim