Ara®
Ver toda la colección para baño Ara®

Llave para baño de diseño acanalado de una manija en negro mate

N.º de modelo: 568LF-BLMPU
Agregar a favoritos
Busque instaladores locales de Delta®
Ara®
Ver toda la colección para baño Ara®
Llave para baño de diseño acanalado de una manija en negro mate
N.º de modelo: 568LF-BLMPU
Precio de lista: $68185
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
Con bordes y ángulos geométricos definidos, la colección para baño Ara® crea una apariencia estilizada de elegancia contemporánea Las llaves con tecnología de sellado DIAMOND Seal® de Delta® funcionan como si fueran nuevas de por vida porque cuentan con un diseño patentado gracias al cual se reducen los puntos de fuga, la instalación es más sencilla y duran el doble que el estándar de la industria. Las llaves con etiqueta WaterSense® de Delta usan al menos un 20 % menos agua que los productos estándar de la industria y le permiten ahorrar agua sin sacrificar el desempeño. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida.
  • La tecnología de sellado DIAMOND Seal® facilita la instalación y permite que su llave funcione como si fuera nueva toda la vida, ya que reduce los puntos de fuga y dura dos veces más que los productos estándar de la industria.
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex®
  • El tubo de salida estilo canaleta abierta crea un hermoso ambiente de cascada.
  • Se adapta a instalaciones con 1 orificio o 3 orificios de 4 pulgadas
  • Incluye placa de encimera opcional de 6 pulgadas para instalaciones con 3 orificios
  • Se incluye anillo indicador de temperatura rojo/azul opcional.
  • El conjunto de desagüe con emergente a presión de metal con acabado a juego (incluido) cumple con la ADA y es fácil de instalar, operar y limpiar.
  • Cumplimiento con la ADA
  • Las llaves con clasificación WaterSense® usan al menos 20 % menos agua que los productos estándar de la industria sin sacrificar desempeño
  • La salida de tina rígida no gira
  • Accesorios de compresión de 3" a 8"
  • Respaldado por la garantía limitada de por vida de Delta Faucet
Ecológica
Con etiqueta WaterSense®
Technology and Special Features
Cumplimiento con la ADA
Libres de plomo
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver especificaciones técnicas
Ver hoja de mantenimiento e instalación
Ver diagrama de repuestos y accesorios
Registrar su producto
Información de instalación
Instalación con 1 o 3 orificios de 4"
Instalación con 1 o 3 orificios de 4"
Altura total:
6 3/8
Voltaje:
0
Caudal:
1.2 gpm a 60 psi, 4.5 l/min. a 414 kPa
Tipo de válvula:
Disco cerámico

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Explorar videos
LISTA DE PIEZAS

LISTA DE PIEZAS

1 2 >
Image-RP90056 Secondary Image-RP90056

Ara®

Ara® Vástago y válvula

Precio de lista: $103.00
Precio en línea: $82.40
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP90056

Image-RP73838

Compel®

Compel® Aireador, consumo eficiente de agua, 1.0 GPM

Precio de lista: $24.25
Precio en línea: $19.40
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP73838

Discontinuado
Discontinuado
Image-RP75409
Discontinuado

Ara®

Ara® Regulador de flujo, adaptador y junta tórica

Precio de lista: $28.00
Acabados estándar

RP75409

Image-RP73837

Compel®

Compel® Aireador, consumo eficiente de agua, 0.5 GPM

Precio de lista: $24.25
Precio en línea: $19.40
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP73837

Image-Master-RP26533

Delta®

Delta® Conjunto de desagüe de metal - Sin tirador de desagüe (baño)

Precio de lista: $80.30 - $166.30
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP26533

Image-Master-RP90060

Ara®

Ara® Base para manija, tubo de salida y junta - 1H

Precio de lista: $52.05 - $68.80
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP90060

Image-RP47029

Leland®

Leland® Soporte de montaje, 1H, baño

Precio de lista: $15.05
Precio en línea: $12.04
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP47029

5.00 2
Image-RP12517

Delta®

Delta® Varilla horizontal

Precio de lista: $18.80
Precio en línea: $15.04
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP12517

2.80 5
Image-RP47030

Leland®

Leland® Llave inglesa de baño

Precio de lista: $8.30
Precio en línea: $6.64
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP47030

1.00 2
Discontinuado
Discontinuado
Image-RP75432
Discontinuado

Ara®

Ara® Reductor de flujo, 1.32 GPM

Precio de lista: $14.05
Acabados estándar

RP75432

Discontinuado
Discontinuado
Image-RP6132
Discontinuado

Delta®

Delta® Tuerca pivotante - Desagüe emergente de metal

Precio de lista: $13.00
Acabados estándar

RP6132

Image-RP12516

Delta®

Delta® Abrazadera con tornillo

Precio de lista: $15.40
Precio en línea: $12.32
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP12516

Discontinuado
Discontinuado
Image-RP6130
Discontinuado

Delta®

Delta® Asiento pivotante y junta - Conjunto de desagüe

Precio de lista: $7.65
Acabados estándar

RP6130

4.60 5
Image-RP6142

Delta®

Delta® Junta

Precio de lista: $10.30
Precio en línea: $8.24
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP6142

Image-RP6140

Delta®

Delta® Tuerca y arandela - Conjunto de desagüe

Precio de lista: $20.90
Precio en línea: $16.72
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP6140

Image-Master-RP90058

Ara®

Ara® Tirador de desagüe y varilla deslizable, 1H, baño

Precio de lista: $38.25 - $50.60
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP90058

RESEÑAS
Rated 1 out of 5 by from Minimal water flow. I wish I would have read these reviews before wasting money on this faucet. As previous reviewers have mentioned, the water flow is horrible. So little water emerges, it takes 5 minutes to warm up.
Date published: 2024-10-03
Rated 1 out of 5 by from Don’t waste your money! This is by far the worst bathroom faucet! The only nice thing about it is it’s look. For a delta product it’s simply terrible and the fact that delta is selling this faucet is disappointing. The water flow is absurd. No pressure, it’s a trickle of water that makes it’s way to the counter every time someone washes their hands. Forget trying to wash your face in the sink. Ugh! Water doesn’t flow straight down. Do NOT buy this faucet.
Date published: 2023-09-07
Rated 1 out of 5 by from This faucet is exhausting! Installed Oct 2020, small unremovable calcium ring by Aug 2021 & now looks like this. Oh and bonus—black mold that sticks to it or sometimes just pours out with the water. Plus it holds EVERY FINGERPRINT and is very hard to clean --everything streaks and leaves some kind of mark. I did reach out Aug of 2021 and asked if I could return it, but think it was a no because it works-can’t find the email. Very disappointed in the quality of this faucet that is now an eyesore in my otherwise beautifully remodeled bathroom. :(
Date published: 2023-07-19
Rated 1 out of 5 by from Love this faucet, but many problems Have had three of these installed by professional plumber 7 years ago. Each one has been problematic. Spout eroded down to the metal - now it's just ugly; handle scratched over time even though never used anything harsher than vinegar; handle became harder to operate over time; handle loose and could not be tightened, set screw stripped very easily - not stuck with floppy handle. Cleaning was always a chore, hard water deposits got under handle. Replacement parts were provided, but will be replacing this with something other than this model.
Date published: 2023-07-05
Rated 1 out of 5 by from Horrible product. In less than 3 years we had to replace. Will not buy Delta products again.
Date published: 2022-12-06
Rated 5 out of 5 by from Cool runnings So cool and fun. But keep it clean so hard water residue won’t cloud up
Date published: 2022-07-16
Rated 5 out of 5 by from centerpiece of the bathroom sink well made. stylish. nice lines.
Date published: 2021-08-11
Rated 1 out of 5 by from lavatory faucets these low flow faucets hardly have enough water to use. I would recommend them. I paid over $500.
Date published: 2021-05-27
  • y_2024, m_11, d_5, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_32
  • loc_en_US, sid_568LF-BLMPU, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

What is the hole size I need for this one hole faucet 568LF-MPU?

Asked by: G Man
Hello! Thank you for your question. The hole size for the 568LF-MPU faucet is 1 1/8"-1 1/2". You can find this measurement and more here: https://media.deltafaucet.com/SpecSheet/DSP-L-568LF-MPU%20Rev%20E.pdf Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Can you remove the Red/Blue water temp indicators?

If so does it leave pits or any noticeable traits behind.
Asked by: ra89
Dear Ra89, Thank you for your inquiry! The red and blue indicators on the Delta Ara Lavatory 568LF-MPU faucet can not be removed from the faucet handle. Best regards, Tanya
Answered by: Tanya
Date published: 2017-06-26

My wife and I ordered 2 of these from a seller on amazon. When it showed up, there was no drain kit in the box. Is this supposed to have a drain kit?

Asked by: Nate
Hello Nate, Thank you for your question. Yes, the Delta Ara Lavatory 568LF-MPU faucet does come with the metal Pop-Up Assembly RP26533. https://media.deltafaucet.com/PartsDiagram/DPD-L-568LF.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Had a Ara faucet installed in November, water flow was very little and getting worse, help

Asked by: Rosie 123
Hi, Rosie 123! Thank you for your question and I am sorry to hear that you are experiencing low flow from your Delta faucet. We do recommend to flush the valve to make sure no debris is causing the low flow. To flush, first turn off the water supply to the faucet.           1. Remove the handle. On the lever handle, you should find a small hex screw that can be loosened with a 3/32" Allen wrench. The handle will lift off when this screw is loose enough.           2. Once the handle has been removed, unscrew the dome-shaped cap. The domed shaped cap will unscrew counter-clockwise.            3. Once the cap has been removed, grasp the round metal stem. The valve cartridge will pull straight out. Also remove the flow restrictor and rinse these parts. You will need to reinstall these parts later, so be sure to note how they are positioned in the valve.      4. Now, with the valve completely disassembled, place a bucket upside down over the top of the empty brass valve body. Turn the hot and cold water supplies back on and let the water run for about 10 to 15 seconds. The water will come directly up out of the valve and should mostly be deflected back into the sink by the bucket. You might have a little bit of water to clean up, though!           5. Shut off the water supplies. Reinstall all parts. If the flow is not better, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Is it normal for water to always be sitting in the trough when faucet is not in use?

Doing a bathroom remodel and just had this faucet put in. After the water is turned off, the front 2/3 of the trough has water remaining in it - which would mean there would always be water setting in the trough. Is this the way it is supposed to be or is the trough supposed to be slanted slightly downwards so that the water completely drains from it? Will water constantly sitting in the trough negatively affect the stainless steel over time? (I have used other trough faucets and never noticed water remaining in the trough.) Please let me know right away as l only have my contractor for 2 more days. Thanks!
Asked by: Andy
Hi, Andy! Thank you for your question. Water remaining in the spout trough is normal. Dry off with a dry towel as needed. For cleaning, use a 50% white vinegar and 50% water solution and clean off any build up as needed, if any. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2016-10-06

Where is the filter in this faucet

Asked by: Slevents
Hello Slevents, Thank you for your question. We are happy to help! The Delta 568LF-BLMPU faucet has a filter and flow restrictor located underneath the valve cartridge. https://media.deltafaucet.com/PartsDiagram/DPD-L-568LF%20Rev%20C.pdf Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

I Need drain with out over flow

Asked by: Edprov
Hello Edprov, Thank you for contacting us, I would be happy to help you. I have attached a link to our push pop up assembly with out overflow, please see the link below. https://www.deltafaucet.com/parts-product-detail?modelNumber=72172-BL Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole
Answered by: Delta7
Date published: 2024-03-28

Do these splatter in the sink? We will have in counter sinks and 2 bowl sinks.

Asked by: jworkman
Hi jworkman, Thank you for your question about the Delta Faucet model 568LF-BLMPU. I am sorry this information was not readily available, and I am happy to help! This channel spout faucet has a laminar flow with a maximum flow rate of 1.2 GPM. How the water will hit the sink can depend on the specific shape and size of the sink and the position of the faucet. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Hello, I am interested in the 568LF-SS. My new sink will have an overflow, does the MPU have an overflow built into the drain? Or would I need to purchase an item such as 72175-SS or 72173-SS? Do you have an image of what the MPU drain looks like? Thanks

Asked by: Wojo350
Hello Wojo350, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet ARA® Ara® Single Handle Channel Bathroom Faucet In Stainless MODEL#: 568LF-SSMPU comes with a pop-up assembly with overflow, please see the link to the pop-up below. https://www.deltafaucet.com/parts/product/RP26533.html Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

How do you clean the filter screen

Asked by: Rick
Hi Rick, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. We recommend flushing the Delta Faucet Ara® Single Handle Channel Bathroom Faucet In Chrome MODEL#: 568LF-MPU. To flush the unit follow the directions below: 1. Remove the handle. On the lever handle, you should find a small hex screw that can be loosened with a 3/32" Allen wrench. The handle will lift off when this screw is loose enough. 2. Once the handle has been removed, unscrew the dome-shaped cap. The domed-shaped cap will unscrew counter-clockwise. 3. Once the cap has been removed, grasp the round metal stem. The valve cartridge will pull straight out. Also, remove the flow restrictor and rinse these parts. You will need to reinstall these parts later, so be sure to note how they are positioned in the valve. 4. Now, with the valve completely disassembled, place a bucket upside down over the top of the empty brass valve body. Turn the hot and cold water supplies back on and let the water run for about 10 to 15 seconds. The water will come directly up out of the valve and should mostly be deflected back into the sink by the bucket. You might have a little bit of water to clean up, though! 5. Shut off the water supplies. Reinstall all parts. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Customer Service
Date published: 2024-03-28

I purchased "Delta Faucet Ara Single-Handle Waterfall Bathroom Faucet with Metal Drain Assembly, Chrome 568LF-MPU". I need to know what is the minimum distance from the center of the hole to the back splash.

Asked by: WayneJang
Hello WayneJang, Thank you for your question. We are happy to help! The 568LF-MPU does not have a listed minimum distance to the backsplash. You would just need enough space to reach fingers behind the faucet to operate the lift rod. https://media.deltafaucet.com/SpecSheet/DSP-L-568LF-MPU%20Rev%20F.pdf Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

Delta 568LF-SSMPU is only dispensing warm/hot water. Purchased June 2021.

Asked by: Libby
Hello Valued Customer, Thanks so much for contacting Delta Faucet Company! It is possible that flushing the product could resolve this issue with the ARA® Single Handle Channel Bathroom Faucet MODEL#: 568LF-SSMPU. To flush the product, turn off the water supplies, remove the aerator using the supplied wrench and turn the faucet handle to the full on mixed position. Turn on the hot and cold water supplies and flush the water lines for one minute. This flushes away any debris that could cause damage to internal parts. Reinstall the aerator with wrench. If this does not help please let us know. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-07-17

PURCHASED 3 OF DELTA 568LF-MPU IN CHROME FOR BATH APPROX YEAR AGO - REGULAR CLEANING OF TROUGH WITH THE SUGGESTED 50% VINEGAR 50% WATER - HOWEVER CLOSE TO THE EDGE OF THE TROUGH APPEARS 2 of them THE FINISH IS COMING OFF - HOW DO I MAKE WARRANTY CLAIM

Asked by: Love these Faucets
Hi Love these Faucets, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-10-29

what is the diffeence between LPU and MPU?

Asked by: Neil
Hi Neil, Thank you for your question about the Delta Faucet model 568LF-MPU. MPU indicates a drain assembly or pop-up is included. LPU indicates the faucet does not include a drain pop-up. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Installed an ARA Faucet (model 56SLF-SSMPU). The water flow was just a trinkle, so I followed the steps you described along with those in the manual. This slightly improved the flow. But still it was not acceptable. And now the faucet will not shut off.

Asked by: KenD

How do I remove and clean aerator on my Ara faucet 

Asked by: KayR
Hello! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! This Delta Faucet 568LF-MPU Ara single handle channel bathroom faucet features an open channel spout so there is no aerator to clean. If you need to clean the spout we recommend wiping away any residual water after each use. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

The requested URL /SpecSheet/DSP-L-568LF-MPU Rev H.pdf was not found on this server. Please fix.

Asked by: Grant78
Hi Grant78, Thanks so much for contacting Delta Faucet Company! Please see the following link for the technical specifications for this model. https://media.deltafaucet.com/SpecSheet/DSP-L-568LF-MPU%20Rev%20E.pdf Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Hi there, What is the expected lifespan of the fixed integrated (none changeable) PEX supply line pipes?

Asked by: great_scandinavian
  • y_2024, m_11, d_5, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_26
  • loc_en_US, sid_568LF-BLMPU, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 39ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.