Delta®

Accesorio de desviador de 3 ajustes y 2 puertos en cromado

N.º de modelo: T11800
Agregar a favoritos
Busque instaladores locales de Delta®
Delta®
Accesorio de desviador de 3 ajustes y 2 puertos en cromado
N.º de modelo: T11800
Precio de lista: $19000
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
Una curva delicada y un estilo esbelto caracterizan el diseño prolijo y moderno de esta terminación para desviador monomando de 3 funciones. Prepararse en la mañana no es un acto de rutina cuando está rodeado por un baño que refleja su estilo personal. La ducha se convierte en su refugio privado, donde los rociadores para el cuerpo y las regaderas funcionan en perfecta armonía.
  • Juego de terminación solamente, se debe comprar el conjunto interior por separado
  • Debe comprarse el juego de tubería interna R11000, que se vende por separado.
  • 2 posiciones individuales, 1 posición compartida
  • Manija tipo palanca única para facilitar la operación.
  • Tubería interna de 1/2".
  • Incluye cartucho de válvula
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
Technology and Special Features
Cumplimiento con la ADA
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver especificaciones técnicas
Ver hoja de mantenimiento e instalación
Ver diagrama de repuestos y accesorios
Registrar su producto
Información de instalación
Overall Height (in.) :
4 1/2
Voltaje:
0
Tipo de válvula:
NA

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Explorar videos
LISTA DE PIEZAS

LISTA DE PIEZAS

1 2 >
Image-Master-RP51924

Delta®

Delta® Cubierta - Desviador de 3 ajustes

Precio de lista: $48.85 - $73.70
Free Ground Shipping All Orders $49+
Acabados estándar

RP51924

Discontinuado
Discontinuado
Image-RP72559
Discontinuado

Cassidy®

Cassidy® Escutcheon - 3-Setting Diverter

Precio de lista: $33.50

RP72559

Image-RP51918

Delta®

Delta® Cartucho - Desviador de 3 ajustes

Precio de lista: $199.60
Precio en línea: $159.68
Free Ground Shipping All Orders $49+
Acabados estándar

RP51918

1.33 3
Image-Master-RP62380

Vero®

Vero® Cubierta - Desviador de 3 ajustes

Precio de lista: $50.90 - $80.70
Acabados estándar

RP62380

Image-Master-RP62381

Vero®

Vero® Cubierta - Desviador de 6 ajustes

Precio de lista: $50.90 - $81.70
Acabados estándar

RP62381

Image-Master-RP70642

Linden®

Linden® Metal Lever Handle Kit - Diverter

Precio de lista: $43.90 - $81.70
Free Ground Shipping All Orders $49+
Acabados estándar

RP70642

Image-RP51919

Delta®

Delta® Cartucho - Desviador de 6 ajustes

Precio de lista: $199.60
Precio en línea: $159.68
Free Ground Shipping All Orders $49+
Acabados estándar

RP51919

3.67 6
Image-Master-RP53447

Arzo®

Arzo® Cubierta - Desviador de 3 ajustes

Precio de lista: $43.45 - $73.20
Acabados estándar

RP53447

Image-Master-RP42413

Victorian®

Victorian® Cubierta - Desviador de 6 ajustes

Precio de lista: $37.65 - $56.40
Acabados estándar

RP42413

Image-RP20032

Delta®

Delta® Tapón de cobre - Ducha únicamente

Precio de lista: $9.80
Precio en línea: $7.84
Free Ground Shipping All Orders $49+
Acabados estándar

RP20032

Image-RP64851

Delta®

Delta® Tuerca de bonete - Desviador de 3 y 6 ajustes

Precio de lista: $30.95
Precio en línea: $24.76
Free Ground Shipping All Orders $49+
Acabados estándar

RP64851

Image-Master-RP61657

Addison®

Addison® Escutcheon - 3-Setting Diverter

Precio de lista: $44.50 - $53.20
Acabados estándar

RP61657

Image-Master-RP52590

Dryden®

Dryden® Metal Lever Handle Kit - Diverter

Precio de lista: $51.05 - $71.45
Free Ground Shipping All Orders $49+
Acabados estándar

RP52590

Image-Master-RP61658

Addison®

Addison® Escutcheon - 6-Setting Diverter

Precio de lista: $39.60 - $55.35
Acabados estándar

RP61658

Image-Master-RP62962

Vero®

Vero® Kit de manija tipo palanca de metal - Desviador de 3 y 6 ajustes

Precio de lista: $66.45 - $94.70
Free Ground Shipping All Orders $49+
Acabados estándar

RP62962

Image-RP72561

Cassidy®

Cassidy® Set Screw & Button - Diverter

Precio de lista: $8.55
Precio en línea: $6.84
Free Ground Shipping All Orders $49+

RP72561

1.00 1
RESEÑAS
Rated 3 out of 5 by from T11800 Appearance great but facia would not day to my old R1100 diverted valve
Date published: 2023-12-09
Rated 5 out of 5 by from homeowner This is worth it, was needed with the diverter that was installed, easy to use.
Date published: 2023-11-13
Rated 5 out of 5 by from Delta T11800 Expensive but well built and works very smoothly
Date published: 2023-07-04
Rated 5 out of 5 by from Control valve This product worked well, and it fit our existing.
Date published: 2022-12-27
Rated 5 out of 5 by from It works well and looks good. smooth design and works well
Date published: 2022-12-01
Rated 5 out of 5 by from Not big box Delta Heavy components provide a solid feel. There’s a light detent when divided flow is selected.
Date published: 2022-10-08
Rated 5 out of 5 by from Nice trim pkg Nice trim for delta valve.
Date published: 2022-01-18
Rated 5 out of 5 by from Just what I wanted Works well and looks great
Date published: 2021-08-02
  • y_2024, m_12, d_22, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_37
  • loc_en_US, sid_T11800, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Preguntas y respuestas

Is there trim that can be used when the hole for the diverter is larger than the trim?

I have the t11800 and I made the hole the same size as the valves. the depth is about on the money slight in too far so the plate can push out the diverter trim too much. Thanks, Steve
Asked by: Steve
Thank you for your question, Steve. The RP42414 will fit behind the plate, and may help cover the hole. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP42414 Technical Specifications: https://media.deltafaucet.com/SpecSheet/DSP-B-T11855%20Rev%20D.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-12-22

At 60PSI, what is the flow rate (in GPM) from each port when not in the shared position? and from each port when in the shared position?

Asked by: Steve
Hello Steve, Thank you for your question. The GPM ( gallons per minute) of the positions for the T11800/R11000 diverter valve depends on the components being used and the trim/cartridge of the control valve. Below is a general chart: Approximate Outlet Flow Rate (gpm) Pressure (psi) 13 Series 17 Series 17T Series 30 3.7 3.5 4.0 40 4.3 4.1 4.6 50 4.8 4.6 5.1 60 5.3 5.0 5.6 70 5.7 5.4 6.1 80 6.1 5.8 6.5 Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2016-09-19

I'm assuming that I can fill the bathtub and run the shower or a hand-held at the same time. Am I correct? Thanks for your assistance. Multitask

Asked by: Multitask
Hello Multitask, Thank you for your question. This diverter will allow you to run two components, together or individually. The diverter valve is not designed to have a tub spout connected to it You would connect the diverter tub spout to the bottom port of the valve. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

We have purchased the Windemere Monitor 14 Series Valve Trim along with the MultiChoice Rough-In. We are wanting a diverter that does two shower heads, plus a both option. This valve recommended isn’t making sense to us. Help? 

Asked by: lexipinney
Rosanna, The I spoke with a Delta representative on the phone yesterday. They said this diverter trim required the R11000 rough-in. This particular rough-in comes with 4 outlets. In which, how do you plumb it accordingly to do the detachable on one, rain head on the other and then both? Does the cartridge that comes with this trim allow for that?
Answered by: lexipinney
Date published: 2024-03-28

Rosanna, I spoke with a Delta representative on the phone yesterday. They said this diverter trim requires the R11000 rough-in. This particular rough-in comes with 4 outlets. In which, how do you plumb it accordingly for 2 heads or both?

Asked by: lexipinney
Hi, Alexis! Thank you for your question. The Delta R11000 has four ports. The bottom port is to be plumbed to a MultiChoice R10000 valve body. The right port is to be plugged, while the two shower components are to be plumbed to the top and left ports. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Depth of installation problem

I have this R11000 diverter with the T11800 trim kit. I had a plumber do all the rough-in, but now that the tile is up and I'm installing the trim, I've found that the plumber put the valve at the wrong depth. While the shower valve trim (a Symmons) itself was fine, the diverter backplate is actually sitting 3/8" from the wall. Is there an alternate trim or a extension plate available that resolve this? Untiling the wall is not an acceptable solution! Thank you, Larry B
Asked by: LarryB
Hi Larry, We are sorry that you are experiencing a problem with your installation. Unfortunately if the valve is plumbed out too far we do not offer any alternative trim rings or extensions to fix the issue. The valve will have to be replumbed. Step 1 of the attached installation manual shows the dimension at which the diverter rough should be installed. http://www.deltafaucet.com/customersupport/documentation/r11000.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

What crartrage do I need to use the right port and to instead of the left and top? Thanks

Asked by: ChrisN
Hello! Thank you for your question. We recommend using a 6 setting diverter cartridge if you are using the right port. The part number for this is RP51919. Please note, there will be blank settings if you are not using all three ports. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Which valve is this"

I have a 3 position diverter that came in a 3/6 box (T11800 versis T11900). The replacement sent is says this on the stem "Fluhs 60567 and 161117". I can't compare with the temp. installed 3, but it looks the same. Delta pic on site for 6 shows (all I can see) https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51919 "uhs __563 and __1109" which leads me to believe it is again the 3/6. Maybe in the future Delta could show all numbers on parts instead of just partial!!!!
Asked by: Ron
Dear Ron, Thank you for your question. The Delta 3-Setting Diverter Trim T11800 comes with the 3-Setting Diverter Cartridge Assembly RP51918. The Delta 6-Setting Diverter Trim T11900 comes with the 6-Setting Diverter Cartridge Assembly RP51919. https://media.deltafaucet.com/PartsDiagram/DPD-B-T11800.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2017-05-30
  • y_2024, m_12, d_23, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_32
  • loc_en_US, sid_T11800, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 34ms
  • questions, product
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.