Ara®
Ver toda la colección para baño Ara®

Accesorios de llave para baño de diseño acanalado de dos manijas de montaje en pared en acero inoxidable

N.º de modelo: T3568LF-SSWL
Agregar a favoritos
Busque instaladores locales de Delta®
Ara®
Ver toda la colección para baño Ara®
Accesorios de llave para baño de diseño acanalado de dos manijas de montaje en pared en acero inoxidable
N.º de modelo: T3568LF-SSWL
Precio de lista: $70675
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida. Las llaves, las duchas y los inodoros con clasificación WaterSense de Delta usan al menos 20% menos agua que los productos estándar de la industria y le ahorran dinero sin sacrificar desempeño.
  • El tubo de salida estilo canaleta abierta crea un hermoso ambiente de cascada.
  • Instalación en pared con 3 orificios de 8"
  • Sin emergente
  • Montaje en pared para un aspecto lujoso y más espacio de tocador optimizado
  • Juego de terminación solamente, se debe comprar el conjunto interior por separado
  • Cumplimiento con la ADA
  • Las llaves con clasificación WaterSense® usan al menos 20 % menos agua que los productos estándar de la industria sin sacrificar desempeño
  • Tubo de salida de canaleta
Ecológica
Con etiqueta WaterSense®
Technology and Special Features
Cumplimiento con la ADA
Libres de plomo
Acabado Brilliance®
Uso eficiente del agua
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver especificaciones técnicas
Ver hoja de mantenimiento e instalación
Ver diagrama de repuestos y accesorios
Registrar su producto
Información de instalación
Instalación en pared con 3 orificios de 8"
Overall Height (in.) :
3 15/16
Voltaje:
0
Caudal:
1.20 gpm a 60 psi, 4.5 l/min. a 414 kPa
Tipo de válvula:
Válvula de cerámica

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Explorar videos
LISTA DE PIEZAS

LISTA DE PIEZAS

Image-RP75494

Ara®

Ara® Adaptador para tubo de salida - Montaje en pared (baño)

Precio de lista: $66.55
Precio en línea: $53.24
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP75494

Discontinuado
Discontinuado
Image-RP63354
Discontinuado

Vero®

Vero® Regulador de flujo y junta, 1.32 GPM

Precio de lista: $13.10
Acabados estándar

RP63354

Image-RP61819

Addison®

Addison® Screws - On Wall - 4 Lengths

Precio de lista: $22.25
Precio en línea: $17.80
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP61819

Discontinuado
Discontinuado
Image-RP75465
Discontinuado

Ara®

Ara® Anillo deslizante (2) - Montaje en pared (lavamanos)

Precio de lista: $5.80
Acabados estándar

RP75465

Discontinuado
Discontinuado
Image-RP61828
Discontinuado

Addison™

Addison™ Junta tórica - Tubo de salida - Montaje en pared (lavamanos)

Acabados estándar

RP61828

Image-Master-RP75463

Ara®

Ara® Aireador y herramienta para extracción - Rectangular - Montaje en pared (baño)

Precio de lista: $47.60
Precio en línea: $38.08
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP75463

Image-Master-RP75462

Ara®

Ara® Juego de manijas tipo palanca de metal - Montaje en pared (baño)

Precio de lista: $107.30 - $134.15
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP75462

Image-Master-RP75461

Ara®

Ara® Brida de tubo de salida y junta - Montaje en pared (baño)

Precio de lista: $36.70 - $45.85
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP75461

Image-RP61821

Addison®

Addison® Flange Nut - Wall Mount Bathroom

Precio de lista: $31.95
Precio en línea: $25.56
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP61821

Image-Master-RP75466

Ara®

Ara® Juego de manijas tipo palanca de metal - Montaje en pared (baño)

Precio de lista: $9.95 - $12.15
Acabados estándar

RP75466

Discontinuado
Discontinuado
Image-RP50652
Discontinuado

Grail™

Grail™ Juego de junta, tuerca y arandela

Precio de lista: $12.40
Acabados estándar

RP50652

Image-RP61820

Addison®

Addison® Stem Extender - Wall Mount Bathroom

Precio de lista: $20.90
Precio en línea: $16.72
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP61820

RESEÑAS
Rated 5 out of 5 by from Used as a tub filler We used this sink facet as a tub filler. I’m not sure if the contractor removed the screen or flow restrictor but it fills the tub quickly and water shoots out of the spout to the middle of the tub or farther if you turn it up. I like seeing the water go out rather than dribble out or go down like a waterfall. It has a 7” spout which is shorter than most tub fillers and we did a wall mount for an alcove tub and it is plenty of room to clear the edge of the tub. Most facets were 11” or more and took up too much space.
Date published: 2024-11-04
Rated 2 out of 5 by from Open channel faucet has corroded Nice looking feature but has a design flaw. The water sits in the open channel on a daily basis and has corroded the faucet. I would appreciate someone reaching out to me on a replacement faucet. Thank you
Date published: 2024-01-28
Rated 2 out of 5 by from Looks great; poor design We have two of these installed in our 6 year old home in the master bathroom. I like the idea and the look, but the quality and design just doesn’t work. As others have mentioned, the water ends up sitting in the spout and has caused the faucet to erode. To avoid this, you would have to wipe it down with a dry cloth after every single use, which is clearly not practical. I would love to be able to get a replacement of just the faucet parts so I don’t have to replace the entire things ( two faucets with handles) with items that don’t match the rest of our house. But it I were doing it again I would not use this design.
Date published: 2021-04-12
Rated 5 out of 5 by from Waterfall bathroom faucet Beautiful, sleek & modern
Date published: 2020-11-30
Rated 5 out of 5 by from looks great with cement sink The style of this faucet matches well with my more rustic, cement trough sink. The faucet seems to be high quality and well made. We have not installed it yet, so I can't comment on installation; but it looks great!
Date published: 2020-01-14
Rated 1 out of 5 by from So disappointing I agree with all the previous low rating reviewers. We had 2 of these installed for our new construction home. The faucets look great, but are so frustrating because they do not drain properly. When the faucets are turned off the water rolls underneath the faucet and rolls backward and drips down behind the vessel sink. Also the water does not completely drain out if the channel and makes the inside slimy. We constantly have to scrub it clean every night. We have noticed that the metal is chipping/ corroding and turning green on the end of the spout. We specifically bought Delta because they have been known to be good quality and reliable. Unfortunately, this is not the case with the Ara line. We Have been so disappointed with the quality and performance of this product.
Date published: 2018-10-01
Rated 3 out of 5 by from Not as nice looking when installed The spout design is not practical for frequent use. It looks bulky and clunky. Hardware quality is good but I not personally a fan of this design. The price is high too.
Date published: 2018-01-20
Rated 1 out of 5 by from Very poor design Loved the look of these faucets. Had them installed and within 1 month they already looked like they needed to be replaced. Water sits in the spout and does not drain out. The tip of the faucet is completely green. Inside the spout is etched from the water sitting. And, I have a water softening system so it is not caused by hard water! Terrible design. I have 2 of the identical faucets and both look terrible. So disappointed to have done a complete bathroom remodel with brand new fixtures that already look old and grimy!
Date published: 2016-12-05
  • y_2024, m_11, d_21, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_T3568LF-SSWL, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

Is this available for a vessel sink in chrome

Asked by: Joanne
Thank you for your review, Joanne! Delta model T3568LF-WL can be used with a vessel sink and this model is featured in the Chrome finish. For a true vessel sink faucet; however, we would recommend models 568LF-MPU, 767LF or model 768LF-MPU. https://www.deltafaucet.com/product-comparison?modelNumber=568LF-MPU&modelNumber=767LF&modelNumber=768LF Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

can this faucet be used for a tub?

we are building a home and want the faucet and a waterfall type spout for the tub - s this unit of a size it could do a soaker tub?
Asked by: lin
There is a tub fixture available but would not recommend it. Leaking after less than 3 months use. Need to break through tiles to fix. See my review of this fixture, it's horrible.
Answered by: Tania70
Date published: 2024-03-28

How do you prevent water corrosion on top of spout?

Asked by: Lucie
Hi Lucie, Thank you for your question! Here are our cleaning and care instructions: Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. For more information, please click the link below: http://www.deltafaucet.com/customersupport/faq/cleaning+and+care/index.html#ixzz47nr9BFLO Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Is it possible to get this model with a longer spout?

Asked by: AJ
Thank you for your question. The Ara T3568LF-WL model does not have a longer spout available at this time. We apologize for any inconvenience this may cause. We do have other wall mount lavatory faucets with longer spouts, however. T3551LF-WL (Dryden) has a spout reach of 8 5/16" (211 mm), T3574LF-WL (Zura) has a spout reach of 8 1/2"(216 mm) and T3552LF-WL (Tesla) has a spout reach of 9"(229 mm). https://www.deltafaucet.com/bathroom/product/T3551LF-WL https://www.deltafaucet.com/bathroom/product/T3574LF-WL https://www.deltafaucet.com/bathroom/product/T3552LF-WL Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2017-08-11

Where can I find a Revit model of this faucet? I would like to spec this and I am not happy with how difficult it has been to get a model.

Asked by: DAKOTAH
Hi, Dakotah! Thank you for your question. Here is a link to our technical specifications for this model: https://media.deltafaucet.com/SpecSheet/DSP-L-T3568LF-WL%20Rev%20C.pdf Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-01-31

How high the spout end needs to be above the drain opening of a vessel sink to prevent least spashing?

Asked by: Lucie
Hi Lucie, Thank you for your question. We leave the spout height up to you, as sink depth and designs can vary. The best way to determine where to install the faucet is to place your hands in a natural position for washing them in your sink, and then allow for a comfortable amount of clearance under the spout. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

the cold water side is leaking how do i repair it i beleive its an ARA

Asked by: buzz
Hi buzz, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Ara® Two Handle Wall Mount Channel Bathroom Faucet Trim In Chrome MODEL#: T3568LF-WL would need a replacement cartridge, I have included a link to the parts diagram for the rough valve below. https://media.deltafaucet.com/PartsDiagram/DPD-B-R3500.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

How do you tighten the handles on these faucets? I don't see a tightening screw anywhere on the handles.

Asked by: Kris
Getting the button off is a challenge. How do you do it without scratching the faucet? Is there a specific tool that should be used?
Answered by: Kris
Date published: 2024-03-28
  • y_2024, m_11, d_19, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_T3568LF-SSWL, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 29ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.