Kate®
Ver toda la colección para cocina Kate®

Single Handle Pull-Down Kitchen Faucet with Soap Dispenser in Chrome

N.º de modelo: 16970-SD-DST
Agregar a favoritos
Busque instaladores locales de Delta®
Kate®
Ver toda la colección para cocina Kate®
Single Handle Pull-Down Kitchen Faucet with Soap Dispenser in Chrome
N.º de modelo: 16970-SD-DST
Precio de lista: $39350
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
La varilla de rociado para tubo de salida deslizable se libera tirando suavemente y le otorga total flexibilidad. La manguera se extiende y retrae sin puntos de fricción, alimentada por la gravedad. Al levantar la varilla para acoplarla, el imán integrado en el tubo de salida la retrae con precisión hasta su lugar. Gracias al acoplamiento MagnaTite®, su llave extensible seguirá viéndose como nueva, a diferencia de otras llaves que tienden a caerse con el paso del tiempo. La exclusiva tecnología de sellado DIAMOND Seal® de Delta presenta una válvula con un revestimiento resistente de diamante. Los conductos de agua de PEX InnoFlex® evitan que el agua dentro de la llave entre en contacto con posibles contaminantes metálicos. Esta potente combinación le ofrece una llave fabricada para hasta cinco millones de usos. Solo las llaves de Delta incluyen pequeñas boquillas flexibles Touch-Clean® de caucho que le permiten limpiar con facilidad la acumulación de calcio y cal con solo deslizar el dedo.
  • El acoplamiento MagnaTite mantiene la varilla de rociado extensible para cocina firmemente en su lugar con un imán potente e integrado, de modo que permanecerá acoplada cuando no esté en uso.
  • La tecnología de sellado DIAMOND cuenta con una válvula incrustada con diamantes para garantizar un funcionamiento como nuevo de la llave para toda la vida
  • Incluye dispensador de jabón con acabado a juego.
  • Cumple con las normas de la Ley para Estadounidenses con Discapacidades (ADA, por sus siglas en inglés)
  • Los orificios rociadores Touch-Clean facilitan la eliminación de la acumulación de minerales.
  • Instalación de 6" a 16" con 3 orificios.
  • El diseño de cuello de ganso con arco elevado gira 360 grados con una manguera retráctil de 20" para una comodidad superior durante las tareas cotidianas de la cocina.
Technology and Special Features
Cumplimiento con la ADA
Libres de plomo
Uso eficiente del agua
Tecnología de sellado Diamond Seal®
Acoplamiento MagnaTite®
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver especificaciones técnicas
Ver hoja de mantenimiento e instalación
Ver diagrama de repuestos y accesorios
Registrar su producto
Recursos
Archivos de diseño
Información de instalación
Instalación con 3 orificios de 6-16"
Instalación con 3 orificios de 6-16"
Overall Height (in.) :
14 5/16
Caudal:
1.8 gpm a 60 psi, 6.8 l/min. a 414 kPa
Tipo de válvula:
Disco cerámico

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Explorar videos
LISTA DE PIEZAS

LISTA DE PIEZAS

1 2 >
Image-RP37490

Delta®

Delta® Placa de estabilización

Precio de lista: $25.80
Precio en línea: $20.64
Free Ground Shipping All Orders $49+
Acabados estándar

RP37490

3.20 5
Image-RP63265

Delta®

Delta® Adaptador - Junta deslizable

Precio de lista: $51.40
Precio en línea: $41.12
Free Ground Shipping All Orders $49+
Acabados estándar

RP63265

Image-RP63264

Delta®

Delta® Kit de adaptadores - Compresión PEX (10)

Precio de lista: $81.50
Precio en línea: $65.20
Free Ground Shipping All Orders $49+
Acabados estándar

RP63264

Image-Master-RP54537

Leland®

Leland® Conjunto de tubo de salida

Precio de lista: $108.65 - $219.30
Free Ground Shipping All Orders $49+
Acabados estándar

RP54537

Image-RP21945

Delta®

Delta® Dispensador de jabón/loción - Tuerca

Precio de lista: $7.30
Precio en línea: $5.84
Free Ground Shipping All Orders $49+
Acabados estándar

RP21945

3.00 1
Image-RP63263

Delta®

Delta® Kit de adaptadores - Compresión PEX (4)

Precio de lista: $39.80
Precio en línea: $31.84
Free Ground Shipping All Orders $49+
Acabados estándar

RP63263

3.67 3
Image-Master-RP49302

Talbott™

Talbott™ Conjunto de dispensador de jabón/loción

Precio de lista: $53.55 - $62.35
Acabados estándar

RP49302

Image-RP80977

Delta®

Delta® Kit de imanes de recambio

Precio de lista: $61.30
Precio en línea: $49.04
Free Ground Shipping All Orders $49+
Acabados estándar

RP80977

3.35 34
Image-RP60923

Delta®

Delta® Espaciadores de rozamiento y abrazadera - Cocina

Precio de lista: $21.40
Precio en línea: $17.12
Free Ground Shipping All Orders $49+
Acabados estándar

RP60923

5.00 2
Image-RP50390

Delta®

Delta® Quick Connect Hose & Clip - 54" - Pull-Up / Pull-Down DST Faucets

Precio de lista: $95.40
Precio en línea: $76.32
Free Ground Shipping All Orders $49+
Acabados estándar

RP50390

3.96 27
Image-RP47030

Leland®

Leland® Llave inglesa de baño

Precio de lista: $8.75
Precio en línea: $7.00
Free Ground Shipping All Orders $49+
Acabados estándar

RP47030

1.00 2
Image-RP51503

Delta®

Delta® Tuerca de bonete con sello de válvula

Precio de lista: $30.80
Precio en línea: $24.64
Free Ground Shipping All Orders $49+
Acabados estándar

RP51503

5.00 3
Image-Master-RP51512

Kate®

Kate® Kit de manija tipo palanca de metal

Precio de lista: $42.40 - $55.75
Acabados estándar

RP51512

Image-Master-RP51511

Kate®

Kate® Conjunto de rociador - Extensible (cocina)

Precio de lista: $67.85 - $88.15
Acabados estándar

RP51511

Image-Master-RP51514

Kate®

Kate® Conjunto de manguito

Precio de lista: $51.20 - $65.10
Acabados estándar

RP51514

Image-RP50815

Victorian®

Victorian® Aireador y llave, retráctil o extensible

Precio de lista: $27.30
Precio en línea: $21.84
Free Ground Shipping All Orders $49+
Acabados estándar

RP50815

4.54 26
RESEÑAS
Rated 1 out of 5 by from Falling apart This completely fell apart :( The hose portion just dangles and the handle to turn the water on/off doesnt turn off properly without a lot of maneuvering. Also, it doesnt maneuver in a way that captures any cold water at this point either. Lukewarm is the coolest you can get. Just not made well unfortunately :( Do they have replacement parts so I dont have to purchase a completely new faucet?
Date published: 2025-03-03
Rated 2 out of 5 by from I was reading reviews. I just paid for it to be installed and a week later the hot and cold little piece fell out and the handle is loose. Someone else in reviews said the same thing. I just paid a lot for the faucet and for it to be installed. How do I fix it?? It is less than two weeks old.
Date published: 2025-02-13
Rated 4 out of 5 by from Very nice faucet! Had a plumber install it so I can't comment on that, but I do love the faucet. My only problem is the faucet "hot cold" handle is somewhat loose. I guess the set screw fell out. I don't see that anywhere on the parts list. This is very inconvenitnt as the hardware store guy said I really have to know the size. Set screws are dumb
Date published: 2024-11-13
Rated 5 out of 5 by from Excellent replacement for our 2003 faucet We installed a Delta faucet for our kitchen when we built our home in 2003. This replacement with the pull out faucet is exactly what we needed!
Date published: 2024-03-29
Rated 5 out of 5 by from Home owner Nice design, great product
Date published: 2023-10-11
Rated 5 out of 5 by from Delta Faucet Beautiful design and great functionality!
Date published: 2023-04-08
Rated 3 out of 5 by from Just Installed - Instructions Don't Quite Match Just installed this product. I'm not a professional installer, so it took an hour or so longer than it should have because the installation instructions/illustrations (both printed included in the box and the same on-line) do not match the product very well. Even the cover page does not match the product. Left me guessing on how to install some pieces.
Date published: 2023-02-18
Rated 1 out of 5 by from Dripping We bought new one few months ago, because previous one was dripping(Same faucet) , but this one started dripping too. This one is even worse than previous one.
Date published: 2023-02-09
  • y_2025, m_4, d_2, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_94
  • loc_en_US, sid_16970-SD-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Preguntas y respuestas

Can I get an escutcheon plate for this faucet

I purchased this faucet to use in the laundry room. The tub has a 4" center, 3 hole. An escutcheon plate would solve the problem. Do you sell any plates that would work with this faucet
Asked by: Phaye
Hi Phaye, Thank you for your question. The model 16970-SD-DST does not have any escutcheon plate compatible with it. The components are made to fit 3 individual holes on a typical 8" center installation Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

If i disconnect lines from handle from the supply shutoffs to move the faucet, can i reconnect them later?

Faucet needs to be moved as the soap dispenser and faucet were installed on the wrong sides. If i disconnect the tubes from the supply lines, do i have to do anything to them to make sure they seal correctly when i reattach them? I want to make sure i still get a good seal with the provided fitting ends.
Asked by: MTBAHS#1
MTBAHS#1, Thank you for your question. You may disconnect the water lines and reinstall them. When reinstalling, please follow the installation instructions exactly as before. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

We ordered a Delta kitchen faucet (16970-SD SDT). We have a concern about the nozzle. It appears (feels like) plastic rather than metal. Is it??

Asked by: Marcia
Thank you for your question, Marcia. The wand assembly is non-metallic. The spout and handle are metal. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

I have a 2-hole sink. I only need the faucet and handle, not the soap dispenser. I bought a Kate and the box indicates it can be used with a 2-hole sink, but all the installation literature indicates a 3-hole sink. Can this be installed in a 2-hole sink?

Asked by: Bruce
Thank you for your question, Bruce ! The Kate, model 16970-SD-DST, can be installed on a two or three-hole sink as this Delta faucet comes with a soap dispenser but this does not have to be installed if it is not needed. Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

What size is the nut that is used to mount the lever assemble?  The plastic wrench slipped off and won’t work now an I can’t seem to get the right deep well socket on the nut while under the sink trying to finishing the install.

Asked by: Greg
Thank you for your question, Greg! The nut itself measures 0.43" in diameter with a thread size of 0.25-20 UNC-IB. Please contact us directly if you need further assistance. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a video on Installing a Delta Model 16970-SD-DST (3 hole) Kitchen Faucet?

Asked by: Robert
Hi, Robert! Thank you for your question. Here is a link to a how to video to show how to install a widespread kitchen faucet with a sink sprayer: https://www.deltafaucet.com/video-gallery/video-page-1?videoId=7BM5xOdzcvE Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can I order bonnet RP51503 only the part, it is broken in my kitchen faucet

Asked by: Bhairavi
Hi, Bhairavi! Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta faucet. The RP51503 bonnet nut can be purchased separately. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51503 You can usually find Delta faucet parts at any dealer that sells Delta faucets. Some good places to check can be found on our website under Where To Buy. http://www.deltafaucet.com/where-to-buy/index.html To order parts directly from Delta, you may call the toll-free Delta Help Line at 1-800-345-3358. We accept Visa or MasterCard for parts orders over the telephone. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Just bought the Kate and really enjoy it but it’s very tricky to get the faucet water to turn completely off. Did I not install it correctly?

Asked by: AaronJ
Hi, Thank you for contacting us. We apologize for any inconvenience. We are more than happy to help you. To better assist you. We would like to gather more information first. Please provide your full name, address, phone number, and install date. Please contact us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2024-03-28

Is the “Kate” faucet made of plastic with a faux-metal finish? Or is it actual metal throughout?

Asked by: annie
Thank you for your question, Annie! Our faucets utilize several materials to ensure the product can be held to the highest standard of quality and durability, however the body is typically cast in brass with a plated finish. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is there any way to get this with a 2.2 gpm flow rate?

Asked by: Bill
Hi Bill, Thank you for your question! The 16970-SSSD-DST single handle kitchen faucet is not available with a 2.2 gpm aerator. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

Hello, can the Kate soap dispenser be filled with foaming soap?  Thanks!

Asked by: Stuman74
Hello Stuman74, Thank you for your question. Soap Dispensers can use liquid dish soap, liquid hand soap, alcohol based hand-sanitizer,and even typical hand lotions. Foaming soap will pump from the soap dispenser but it will not foam. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

How many ounces does the soap dispenser hold?

Asked by: MarBer
Hi, MarBer! Thank you for your question. The Delta 16970-SSSD-DST Soap Dispenser bottle holds 13 ounces. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How deep does the sink need to be to work with this faucet?

My sink is a high low unit with the deeper sink being 9 1/2" deep. Will it work with a sink this shallow?
Asked by: Judie
Hi Judie, Thank you for your question. This faucet should work with your sink. It can work with sinks of any depth. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Can the soap dispenser be placed on the far right with the faucet on the far left and the lever in the middle?

I want to replace the discontinued Delta 172 Waterfall model. Will the existing holes work for the Kate model?
Asked by: Mary
Hi Mary, Thank you for your question. The soap dispenser can be installed to the right of the handle. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-04-04

Why do Delta single control faucets require 2.5 inches to backsplash? I only have 2 inches so does that mean Delta is a non-option for me?

Asked by: 300m
Thank you for your question, 300m! We recommend a minimum 2 1/2" (64 mm) clearance to the back splash in order to provide comfortable room for handle operation or for a lift rod concerning a lavatory faucet that uses a stopper assembly. This is also advised for the consideration of ease of install or repairs. This model will still work for your installation however. Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

What size holes?

What size holes to drill into the granite for this faucet?
Asked by: Erin
Hi Erin, Thank you for your question. The recommended hole size for the model 13970-SSSD-DST faucet is 1-3/8" or 35mm. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Can the hose be extended? I al looked to have a hose long enough to fill up mop bucket

Asked by: ChuckD2102
Thank you for your inquiry, ChuckD2102! The hose assembly of the Delta Kate Pull-Down Kitchen 16970-SSSD-DST faucet will pull out of the fixture approximately 20" giving you 20" of reach. Unfortunately, we do not manufacture any extenders for our pull-out/down hose assemblies. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

What is the "reach"? In other words, how far into the sink does this faucet extend, measuring from the base of the faucet?

Asked by: AmyM
HI, AmyM! Thank you for your question. The spout reach for the Delta 16970-SSSD-DST Faucet measures 9 1/4" (235 mm). Here is a link to the technical specifications for further measurements for this faucet: https://media.deltafaucet.com/SpecSheet/dsp-k-16970-sd-dst_C.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

I have the Kate kitchen faucet (16980-SSSD-DST) purchased in 2014 . The set screw no longer locks the handle onto the valve, and the set screw is frozen in place. A replacement handle is no longer available, can I use another handle instead, and which?

Asked by: Janet
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-01-06

i was wondering how easy is it to refill the soap dispencer? and do i have to get under the cabinet every time i need to refill it?

Asked by: wicked
Thank you for your question, wicked! The soap dispenser head will simply lift up for quick and easy refilling or you can unthread the bottle below deck for occasional cleaning as well as refilling if needed. https://media.deltafaucet.com/PartsDiagram/DSP-K-16970-SD-DST.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

How can I tighten the on off handle? It's way to loose and I can't seem to figure out where the screws are to tighten it. Thank you.

Asked by: Lanie
Thank you for your question, Lanie! The Delta Kate Pull-Down Kitchen 16970-SSSD-DST faucet has a red/blue indicator button on the front of it. Once, the button is removed, using a 1/8" Allen wrench the set screw can be tighten or removed from the handle. Please see the below Parts Diagram document link. https://media.deltafaucet.com/PartsDiagram/DSP-K-16970-SD-DST.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

how far does it pull down?

Does "pull-down spray wand features a 59″ hose providing a 20″ reach" mean that the sprayer pulls down/out of the fixture by 20"?
Asked by: coyote
Hi Coyote, Thank you for your question. You are correct that the sprayer will pull out of the fixture approximately 20" giving you 20" of reach. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

How far does the spout stick out into the sink in inches from the base to the spout?

Asked by: art
I kno w your question is more than year old, and I do not own this faucet yet. In the picture above it says the height is 14.31" and spout reach is 9.25"
Answered by: arshi
Date published: 2024-03-28

Fill soap dispensor

Hello, does the soap dispenser get filled from the top or bottom? I read the install manual but it was not clear, it sounds like you just lift the pump out but that would leave me to think the pump is not secure to the body. Can you please explain?
Asked by: RalphTrent
Dear RalphTrent, Thank you for your inquiry! To fill the soap dispenser, you would simply lift up on the head assembly to remove it and the pump. Then pour the soap down the hole into the 13 ounces soap bottle. You can also refill it from above the sink using a vented funnel RP30395. Best regards, Tanya
Answered by: Tanya
Date published: 2017-06-03

Is there a way to raise the height of the fauce by a few inches.  If so, what part can I purchase?  

Asked by: Gary
Thank you for your question, Gary. Unfortunately, we do not make something to raise the height. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

How wide the holes in the counter have to be.

Asked by: Kathy
Hi, Kathy! Thank you for your question. The Delta 16970-SSSD-DST faucet requires a hole size of 1 3/8" (35 mm). Here is a link to the technical specifications sheet for this faucet to show further measurements: https://media.deltafaucet.com/SpecSheet/dsp-k-16970-sd-dst_C.pdf Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

I do not see the lead compliance data for this model. Is this lead free?

Asked by: Labas
Thank you for your inquiry, Labas! There are no lead containing components used in the construction of the Delta Kate Pull-Down Kitchen 16970-SSSD-DST or any of our new DST (Diamond Seal Technology) faucets. The box would have the No-Lead Compliant (checked circle) label, also shown on the website right above the product features. https://www.deltafaucet.com/kitchen/product/16970-SD-DST Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

is there a video on installing a 16970 SSSD-DST KATE faucet

Asked by: Bob1
Hello Bob1, Thank you for contacting us. I am sorry this information is not readily available and I would be happy to help you. Please see the link below, this faucet on our video does not match the 16970-SSSD-DST however the installation is the same. https://www.deltafaucet.com/video-gallery/install/how-install-deltar-single-handle-pull-out-kitchen-faucet Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole
Answered by: Delta7
Date published: 2024-03-28

what pump do i need for the kate pull down soap dispenser

Asked by: jim0154
Hi jim0154, Thank you for your question about the Delta Faucet model 16970-SD-DST. A replacement pump and bottle for the soap dispenser included with this Kate pull-down is RP47888. https://www.deltafaucet.com/parts/product/RP47888.html Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

Where can I get a replacement soap dispenser for the Stainless Delta Kate kitchen faucet?  I really only need the bottle.

Asked by: Ronda
Hi Ronda, thank you for contacting Delta Faucet Company! We apologize for any issues you are experiencing and are happy to assist! The RP47888 is the pump and bottle for the soap dispenser RP49302. The RP47888 can be found online or locally. https://www.deltafaucet.com/where-to-buy We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2025, m_4, d_3, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_93
  • loc_en_US, sid_16970-SD-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 50ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.