Llave para cocina extensible de una manija con dispensador de jabón y tecnología ShieldSpray en acero inoxidable SpotShield

Hi B stubs! Thank you for your question and we are happy to help. A drip may be fixed with the RP50587 cartridge. Please contact us directly for further assistance. Best Regards, Carrie

Hi Webgal, thank you for contacting Delta Faucet Company! We apologize for the inconvenience you are experiencing! The set screw for this handle is RP72998. Please reach out to us directly so we can further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi BeBe3317, Thank you for your question about the Delta Faucet model 19805Z-SPSD-DST Emery™ Single Handle Pulldown Kitchen Faucet With Soap Dispenser And ShieldSpray Technology In Spotshield Stainless. We will be happy to assist you as quickly as possible. Yes, this faucet model features an aerated stream, spray setting, and ShieldSpray to help power off the mess without making a mess. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello Marion, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 19805Z-SPSD-DST Single Handle Pulldown Kitchen Faucet With Soap Dispenser And ShieldSpray Technology measures 16 1/2" in height at the highest point of the arc. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi Andrew, Hi Andrew, Thank you for your question about your Delta Faucet model 19805Z-SPSD-DST. We are happy to assist you! We have reached out to you directly. We would be more than happy to assist in getting this issue resolved. We look forward to better serving you in the future. Best Regards, Themar Digital Engagement Specialist

Hi Gloria, Thanks so much for your feedback. We are sorry to hear that you are experiencing these stains on your new sink. I assure you; they are not rust marks. Typically, when red spots appear on a Stainless-Steel Sink like ours it is simply surface discoloration. This is usually taken care of permanently with a stainless-steel polish and/or cleaner when used according to the directions of the cleaning product. Products such as Bar Keeper’s friend and a fine 3M Scotch Brite pad are both great options. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hi Michelle, Thank you very much for your interest in our kitchen sink! I can answer your question. We currently only offer this model sink with the drain opening on the right hand side, however, we certainly will be passing your request along to our product development team for future consideration. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hi Dan4865, Thanks for your question regarding 19805Z-SD-DST! Yes, the optional 10" deck plate (RP51243) is included. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi KathyS, Thank you for your question. We are happy to assist you in this matter. Please contact us directly at 1-800-345-DELTA (3358) or via email at sinksupport@deltafaucet.com for any additional questions or concerns.

Hi Johnny, That is a great question and I can answer that for you. Yes, you can install this sink as an undermount and still use the accessories. You will want to have a zero or positive reveal only for this model sink. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hi CornCob, Thank you for your question about the Delta Faucet model 19805Z-SD-DST. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! The issue would be caused by water debris trapped in the cartridge. We recommend flushing the faucet. The first step is to remove the aerator, wand, or hose and run the faucet for a couple of minutes. Next, to further flush the cartridge, turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge, and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold water line to ensure all particles have been removed from both supplies. If the issue remains after flushing, the RP73000 cartridge may need to be replaced. Please contact us directly for further assistance or if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Marisa, thank you for your interest in the 95A9135-33S-SS-3D! Brilliance Stainless will be compatible with the sink. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Lowell, We have DXF files available and can send them over as soon as you need it. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can assist you with getting the DXF files you are looking for.

Hi Jim, Thank you for your question about the Delta Faucet model 19805Z-SD-DST Emery™ Single Handle Pulldown Kitchen Faucet With Soap Dispenser And ShieldSpray Technology In Chrome. I am sorry this information was not readily available, and I am happy to help! A replacement spray head for this faucet model is part number RP100249. https://www.deltafaucet.com/parts/product/RP100249.html The numbers written on the sprayer is an engineering standard that will be written on many different faucet models. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Dmitri, Yes! all of our kitchen sinks are designed to accommodate a disposal unit! you will have to replace the included strainer with the disposal unit during installation. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hi Kathy, That is a great question and I can answer that for you! Yes, you can install a glass rinser into your stone counter top or sink directly. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hi flightOrFight, Thank you for your question about the Delta Faucet model 19805Z-SD-DST. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! The issue would be caused by water debris trapped in the cartridge. We recommend flushing the faucet. The first step is to remove the aerator, wand, or hose and run the faucet for a couple of minutes. Next, to further flush the cartridge, turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge, and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold water line to ensure all particles have been removed from both supplies. If the issue remains after flushing, the RP73000 cartridge may need to be replaced. Please contact us directly for further assistance or if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Michael, Thank you for your question. We are happy to assist you in this matter. Please contact us directly at 1-800-345-DELTA (3358) or via email at sinksupport@deltafaucet.com for any digital download files for sink cutouts.

Hi Katie, That is a great question! I can answer that for you. The main difference is the radius of the corners inside the bowl, the Emery line has a 5mm tight radius corner and the Lorelai has a more open 10mm radius corner. Also the Lorelai typically comes with some additional accessories like a cutting board and drain cover. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hi Craig, That is a great question and I can answer that for you! Yes, that extra accessory hole is designed and is compatible with an air gap. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hi Barb, Thanks for your question regarding 19805Z-SD-DST! I have linked the parts diagram below to better assist you. https://media.deltafaucet.com/PartsDiagram/DPD-K-19805Z-SD-DST.pdf Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi Ralph C 36, Thank you for reaching out. We are happy to answer your question. The minimum cabinet size required for the 95A9135-33S-SS-3D sink model is 36''. This is to ensure there is enough room for the mounting hardware required for installation. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any further questions or concerns.

Hello Yinzonix, That is a great question, I can help you with that. The model and GR150-SP comes in the Spotshield Stainless and matches our stainless steel sinks the best. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hi CAADU, Thank you for reaching out, we can take a look at your sink and assist you with what you are reporting. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can assist you as soon as possible.

Thank you for reaching out! More thank likely what you are seeing are deposits on the surface if the grid and strainer. The good news is that with certain cleaning methods and products you should be able to restore the luster of those accessories. We highly recommend the cleaning methods and products mention below. GENERAL CLEANING A great way to protect the bottom of your kitchen sink against wear and tear from everyday use, Delta bottom grids are made with premium stainless steel for durability and easy maintenance. To prevent build-up over time, rinse both sides of the grid after using your sink, and pat dry with a microfiber cloth. For a more thorough cleaning, use water and a mild liquid soap detergent (ammonia-free) or a product from the “Products to Consider” section below. Apply cleaner with a soft sponge or microfiber cloth, then thoroughly rinse with lukewarm water and pat dry with a microfiber cleaning cloth. DEEP CLEANING Although bottom grids are a highly useful and versatile accessory, they can also be a magnet for dirt and debris from all your kitchen tasks. For a deeper clean from stuck-on food, you can do the following: • Put it in your dishwasher! Delta bottom grids are dishwasher-safe – just make sure to take off the rubber feet and bumpers. To fit large grids into the dishwasher, try removing the top rack and placing the grid in the bottom rack • Fill your sink with hot water and soap-suds and place the grid face down to soak. Use a scrub brush and dish soap, or a soft cleanser like Bar Keeper’s friend, to tackle trouble spots, then rinse thoroughly with water • Make a paste from baking soda and lemon and let it sit on trouble spots, then scrub and rinse thoroughly with water THINGS TO AVOID • DO NOT wash rubber feet and bumpers in the dishwasher. These should be rinsed with water and/or hand-washed with a mild detergent PRODUCTS TO CONSIDER • Dishwashing soap • White vinegar + water solution 50/50 • Mild bleach solution • Food-grade mineral oil Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please refer to the specification sheet in the link below on page 11. https://media.deltafaucet.com/MandI/106557%20Rev%20G.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com