Llave para cocina de dos manijas con rociador en acero inoxidable SpotShield

Thank you for your question, Andy! The handles on this model can be removed by unscrewing the handle base counterclockwise. You can find further instructions on page 4 of the maintenance and installation manual. https://media.deltafaucet.com/MandI/84712%20Rev%20B.pdf Best regards, Edward

Thank you for your question, Timm! This model can be used without the sprayer by using the included RP84863 Diverter Cap. https://media.deltafaucet.com/PartsDiagram/DPD-K-21712LF_A.pdf Best regards, Edward

Hi, Tim! Thank you for your question. There is a diverter assembly in the faucet that will divert the water from the faucet to the sprayer assembly when the sprayer assembly button is activated. Best Regards, Rosanna

Thank you for your question, jdelraz! The escutcheon plate is not removable on this model and unfortunately the Emmett Collection does not offer a widespread version at this time. Below is a link to our widespread models that we offer currently. https://www.deltafaucet.com/bathroom/sink-faucets/widespread Best regards, Edward

Dear Pete, Thank you for your question! The aerator of the Delta Emmett Kitchen 21742LF faucet, simply unscrews counter-clockwise from the end of the spout body/arm. https://media.deltafaucet.com/PartsDiagram/DPD-K-21742LF.pdf Best regards, Tanya

Hello Haim, Thank you for your interest in the 21742LF faucet, and I am glad to help you. You will need to use the RP84863 cap. Best regards Eric

Hi, Pam! Thank you for your question. The thread size for the aerator assembly is m21.5 x1. Best Regards, Rosanna

Hi, Thank you for contacting us. We apologize for any inconvenience. We are more than happy to help you. To better assist you, we would like to gather some more information first. Could you please provide your full name, address, phone number, and date of install. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany

Thank you for your question, Robert505! I do apologize that your handle is tight, but will be more than happy to help! In order to remove the handles on model 21742LF, you would need to turn the handle base counterclockwise. When putting the handles back on, you will need sure the handle with "H" mark is installed on the left, and the handle with "C" mark is installed on the right. If you need further assistance, feel free to contact us directly. Best Regards, Benjamin

Thank you for your question, Ronnie! The aerator on this model is removable for cleaning by turning it counter-clockwise. We do not recommend taking all of the internal component out as simply pouring a 50/50 solution of white vinegar and water through the aerator should help break up any mineral buildup. https://media.deltafaucet.com/PartsDiagram/DPD-K-21712LF_A.pdf Best regards, Edward

Thank you for your question, Denise! The escutcheon is not removable on this model, however below is a link to some of our kitchen widespread options. https://www.deltafaucet.com/product-comparison?modelNumber=2480-AR-DST&modelNumber=2256-DST&modelNumber=155-DST Best regards, Edward

Hello, Rich! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! In order to remove the handles on this Delta Faucet model 21742LF-SP Emmett® Two Handle Kitchen Faucet With Spray In Spotshield Stainless faucet, you would need to turn the handle base counterclockwise. Please see page 3 of the instruction manual in the following link. https://media.deltafaucet.com/MandI/84712%20Rev%20C.pdf Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hi rick, Thanks so much for contacting Delta Faucet Company about, 21742LF-SP! The handles can be removed by hand turning the handle base counterclockwise, if tight, wrap a rag soaked in 50/50 white vinegar and water around the handle base and let soak for 15-20 min. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Crabsody, Thank you for your question, I would be happy to help you. The RP78201 is not available, the RP25513 and RP4993 would work for this faucet. Please contact us back for any further questions or concerns. Best Regards, Nicole

Hi Cissie, Thanks so much for contacting Delta Faucet Company! The CASSIDY™ Side Spray & Hose Assembly MODEL#: RP72751 can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Randy, Thank you for your question about the Delta Faucet model 21742LF-SP. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! If the handle is tight, we recommend replacing the stem unit. The part number is RP101504 or RP24096 depending on the faucet code. See the parts diagram for more information. RP78201 does not exist and is actually RP24096. https://media.deltafaucet.com/PartsDiagram/DPD-K-21742LF%20Rev%20A.pdf Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello NewHome21! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. We recommend flushing the valves of the Delta Faucet Emmett® Two Handle Kitchen Faucet With Spray In Spotshield Stainless MODEL#: 21742LF-SP. Please follow the directions below to flush the valves: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is.  Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow.   If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines.  Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water.  Next, disconnect the hot water supply line and place it inside of a bucket.  Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Hi roadlesstraveledguy, thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and will be happy to assist! To remove these handles, please hold on to the lever and rotate the handle base counterclockwise. Once you rotate it enough you will be able to lift it straight off of the valve. We appreciate your feedback. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Russ, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We are happy to assist you. The Delta Faucet Emmett® Two Handle Kitchen Faucet With Spray In Spotshield Stainless MODEL#: 21742LF-SP aerator assembly, RP80909, has a thread size of m21.5 x1. We currently do not manufacture adapters. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi Valued Customer, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet Delta Emmett® Two Handle Kitchen Faucet With Spray In Spotshield Stainless MODEL#: 21742LF-SP handles can be removed by hand turning handle base counterclockwise. Please see the M&I sheet in the link below on page 4 for the instructions. https://media.deltafaucet.com/MandI/84712%20Rev%20C.pdf Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist

Hello Jimm, Thank you for contacting us, I would be happy to help you. Our website shows Delta products at the list price. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi plumber 1, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Emmett® Two Handle Kitchen Faucet With Spray In Chrome MODEL#: 21742LF handles can be removed by hand turning the handle base counterclockwise. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello DebP, Thank you for your question! I am happy to help you! Our Delta 21742LF has a part number of RP78201 however this part has been changed to RP25513, Please see the diagram below for the parts diagram. https://media.deltafaucet.com/PartsDiagram/DPD-K-21712LF_A.pdf Please contact us back with any further questions. Best Regards, Nicole

Hello Denise, Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you. Unfortunately, the Delta Emmett kitchen faucet does not have any replacement parts that swivel. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello Greg, Thank you for your question! I am happy to help you! If the handle is hard to turn on our Delta Faucet EMMETT® Two Handle Kitchen Faucet With Spray MODEL#: 21742LF then we would recommend soaking the stem in a 50/50 solution f white vinegar and water. If soaking does not fix the tight handle operation the stem would need to be replaced. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hi Rich, thank you for your interest in the 21742LF! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Wiley, Thanks so much for contacting Delta Faucet Company about your 21742LF! The RP24096 stem unit assembly uses the RP1129 o-ring, which is visible on the outside. The inner inlet supply o-ring that is not visible is part number RP75547. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Swizzle, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet DELTA® Emmett® Two Handle Kitchen Faucet With Spray In Chrome MODEL#: 21742LF includes a diverter cap RP84863 design to block the spray assembly. I have attached the link to the parts breakdown. https://media.deltafaucet.com/PartsDiagram/DPD-K-21712LF.pdf Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar

Hi Wlhft, Thank you for your question about the Delta Faucet model 21742LF. Please accept our sincere apology for the inconvenience you are experiencing with removing the handle. We are happy to help! Both handles are removed by turning the base counterclockwise. There may be mineral deposits that cause the handle to be difficult to remove. I recommend soaking the area with 50/50 white vinegar and water to help remove any mineral deposits. Wrap a rag that has been soaked in a 50% solution of distilled white vinegar around the area. Let sit for 30 minutes and repeat as needed. Please reach out if further assistance is needed or with any additional questions! Best Regards, Bryan Digital Communications Specialist