Llave para cocina retráctil de una manija con dispensador de jabón en cromado

Hello Phil, Thank you for contacting us, I would be happy to help you. This faucet is all chrome, there is no stripe on the back of the handle. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hello Bill 2691, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Foundations® Single Handle Pull-Out Kitchen Faucet With Soap Dispenser In Chrome MODEL#: B4311LF-SD does not have the escutcheon and gasket available separately. These parts would have come in the original box, and the whole faucet would need to be replaced to receive those parts. Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole

Hello MariaRN27! Thank you for your question and we are happy to help! To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is.  Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow.   If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines.  Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water.  Next, disconnect the hot water supply line and place it inside of a bucket.  Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hello alan, Thank you for contacting us, I am happy to help you. Our Delta B4311LF-SD can be installed using a single hole or three-hole installation. Please see the link below to show the measurements. https://media.deltafaucet.com/SpecSheet/DSP-K-B4311LF-SD%20Rev%20A.pdf Please contact us back for any further questions. Best Regards, Renna

Hi Valued Customer, Thank you for your question regarding our Delta Faucet B4311LF-SD. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Jocelyn, thank you for contacting Delta Faucet Company! No. It sounds like you are experiencing an issue with the seats and springs. Please reach out to us directly so we can assist you further with this matter! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello Robert, Thank you for your question, I would be happy to assist you today! The part number for replacement seats and springs for model B4311LF-SD is RP44123. Please contact us if you have any other questions or concerns. Best Regards, Angel

Hello Sanderso, Thank you for your question about the Delta Faucet model B4311LF-SD FOUNDATIONS® Single Handle Pull-Out Kitchen Faucet With Soap Dispenser. I apologize for any difficulty finding this information. We are happy to help! Yes, the faucet can be installed without the soap dispenser. See the installation manual for more information. https://media.deltafaucet.com/MandI/92630%20Rev%20B.pdf Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hi Dashrossi, thank you for contacting Delta Faucet Company! The RP41122 o-ring is RP13938. The size of this o-ring is 7/16" OD x 5/16" ID. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi John72, Thanks so much for contacting Delta Faucet Company! The Delta Kitchen Pull-Out Kitchen B4311LF-SD faucet is designed with a flow rate of 1.80 GPM at 60 PSI. There is no way of increasing or decreasing the flow rate of this faucet. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Linda, Thank you for your question! I am happy to help you! Our Delta kitchen Faucet B4311LF-SD handle is 10" from the counter to the tip of the open handle. I have also included the technical specification sheet below. https://media.deltafaucet.com/SpecSheet/DSP-K-B4311LF-SD%20Rev%20A.pdf Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hello Linda, Thank you for your question! I am happy to help you! Our Delta Kitchen Faucet B4311LF-SD sprayer will stay on whichever setting you set it to. It will not change each time you turn the water off and on. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hello Dewy! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. We recommend flushing the valves of any new installation. To do so, please follow the instructions below: To flush the unit, we recommend the following: -Start with the easy stuff: -Remove your aerator, wand or hose to check the flow through the unit without that part installed. -If the flow is good, the piece you’ve removed is where the issue is.  -Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow.   -If the water does not have a good flow, the problem could be in the faucet. -Next, check the supply lines for debris: -Turn the supply off to both the hot and cold-water lines.  -Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water.  -Next, disconnect the hot water supply line and place it inside of a bucket.  -Once the line is securely positioned into the bucket, turn on the cold-water supply. -Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. -After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Hello Timmo, Thank you for your question about the Delta Faucet model B4311LF-SD FOUNDATIONS® Single Handle Pull-Out Kitchen Faucet With Soap Dispenser. I apologize for any difficulty finding this information. We are happy to help! As a global manufacturer, we source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hi Becky! Thank you for your question and we are happy to help. The aerator for the Delta B4311LF-SD aerator comes with th3 RP92442. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Valued Customer, Thank you for your question! Yes, the clip is compatible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Tempeh! Thank you for your question and we are happy to help! To install the wand assembly of the Delta FOUNDATIONS® Single Handle Pull-Out Kitchen Faucet With Soap Dispenser MODEL#: B4311LF-SSSD, you will pass the hose through the faucet, snap the clip to the hose and be sure the clip is oriented as illustrated in the maintenance and installation sheet linked below. Attach hose by firmly pushing onto a faucet outlet (at the back of the valve) until it clicks. Pull the hose assembly out of the spout and be sure to hold the end of the hose down into the sink. Turn the faucet handle to the full-on mixed position. Turn on hot and cold water supplies and flush water lines for one minute. Place gasket into hose nut. Thread the hose nut onto the wand assembly hand tight. These instructions are on page 4 and 5 of the maintenance and installation sheet linked below: https://media.deltafaucet.com/MandI/92630%20Rev%20B.pdf With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie

Hello bearcreek, Thank you for your question about the Delta Faucet model B4311LF-OBSD Foundations® Single Handle Pull-Out Kitchen Faucet With Soap Dispenser In Oil Rubbed Bronze. I apologize you are not satisfied with the faucet flow rate. I know that can be frustrating. We are happy to help! This faucet is designed to have a maximum flow rate of 1.8 GPM at 60 psi with the included aerator. To troubleshoot a low flow rate, I recommend checking the flow with the aerator removed and cleaning the aerator if necessary. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hello Kate79, Thank you for your question! I am happy to assist you! We do not recommend using foaming soap in any Delta soap dispensers as it will not pump properly. Please contact us back with any further questions. Best Regards, Skyler

Hi KAT1988, Thanks so much for contacting Delta Faucet Company! The B4311LF-SSSD does use a cartridge, however we would recommend on flushing the faucet. Low flow is caused a blockage or debris, I have included a link to our Help Center for flushing instructions. https://support.deltafaucet.com/s/article/Why-does-my-faucet-have-low-water-pressure-1628028366405 Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi DLGM, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with your Delta Faucet Foundations® Single Handle Pull-Out Kitchen Faucet With Soap Dispenser In Stainless MODEL#: B4311LF-SSSD. Here is what we can do to resolve your issue for you. Our Delta product is a mixture of metallic and non-metallic material, Quality is very important to us and our products undergo rigorous testing to ensure high-quality performance. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Biff! Thank you for your question and we are happy to help! The parts and accessories diagram for the Delta Single Handle Pull-Out Kitchen Faucet With Soap Dispenser Model B4311LF-SSSD is linked below: https://media.deltafaucet.com/PartsDiagram/DPD-K-B4311LF-SD.pdf With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie

Thank you for your question, basil49! The hot water inlet on Delta Foundations model B4311LF-SSSD is the shorter one on the left. Best Regards, Benjamin

Thank you for your question, Tajdu! If there is a reduction on flow on model B4311LF-SSSD, we recommend removing and cleaning the aerator. Feel free to contact us directly, if you need further assistance. Best Regards, Benjamin

Hello Melanie, Thank you for your question! I would be more than happy to assist today. The reach of the spout on RP44479 is 2 7/8" from the middle of the head to the end of the spout. Please contact us back for any further questions. Best Regards, Kayla

I sent an email to customer service on July 11, 2024 and haven't heard anything back. So disappointed. My soap dispenser still doesn't work. Not a happy customer.

Hi Tammy, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. We will need more information to better assist you. Please send us an email at customerservice@deltafaucet.com. Best Regards, Skyler

Hello Larry24, Thank you for your question about the Delta Faucet model B4311LF-OBSD FOUNDATIONS® Single-Handle Pull-Out Kitchen Faucet With Soap Dispenser. I apologize for any difficulty finding this information. We are happy to help! Yes, this faucet model can swivel 120 degrees, has an oil-rubbed bronze finish, and can be installed in a single hole without the optional escutcheon plate. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan