Delta®
Montaje flexible para dos manijas
N.º de modelo: R2707
- CARACTERÍSTICAS DEL PRODUCTO
- Documentos y especificaciones
- RESEÑAS
- Preguntas y respuestas
- LISTA DE PIEZAS
CARACTERÍSTICAS DEL PRODUCTO
- Kit de instalación de empotrado para bañera romana de 3 orificios
- Disposición de montaje flexible en encimera o reborde
- Base de ubicación automática
- Se ajusta sobre la encimera
Información especial
ADVERTENCIA de la Proposición 65 de California
ADVERTENCIA DE LA PROPOSICIÓN 65 de California
Este producto puede exponerle al plomo, que según el estado de California causa cáncer y anomalías congénitas u otros daños reproductivos.
Para obtener más información, visite http://www.P65Warnings.ca.gov.
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Información de instalación
Instalación con 3 orificios de 8-16"
Overall Height (in.) :
2 5/32
Tipo de válvula:
Cartucho de vástago sin arandelas
SOPORTE PARA LA INSTALACIÓN
¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.
¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.
LISTA DE PIEZAS
LISTA DE PIEZAS
View Product
![Image-RP18362]()
Delta®
Delta® Junta tórica - Bañera tipo romana y llave de llenado para bañera
Precio de lista: $8.55
Precio en línea: $6.52
Free Ground Shipping All Orders $49+
Acabados estándar
RP18362
View Product
![Image-RP18361]()
Discontinuado
Delta®
Delta® Conector en T
Precio de lista: $7.65
Acabados estándar
RP18361
View Product
![Image-RP40503]()
Discontinuado
Delta®
Delta® Tornillo - Bañera tipo romana - R2700 y R4700
Precio de lista: $3.45
Acabados estándar
RP40503
View Product
![Image-RP40504]()
Delta®
Delta® Arandela superior y tubo de salida - Bañera tipo romana - R2700/R4700
Precio de lista: $9.85
Precio en línea: $7.52
Free Ground Shipping All Orders $49+
Acabados estándar
RP40504
View Product
![Image-RP40510]()
Delta®
Delta® Conjunto de válvula de extremo - Bañera tipo romana - R2707/R4707
Precio de lista: $91.00
Precio en línea: $69.32
Free Ground Shipping All Orders $49+
Acabados estándar
RP40510
4.00 1
View Product
![Image-RP4993]()
Delta®
Delta® Asientos y muelles (2 c/u)
Precio de lista: $9.30
Precio en línea: $7.08
Free Ground Shipping All Orders $49+
Acabados estándar
RP4993
4.69 97
View Product
![Image-RP40509]()
Discontinuado
Delta®
Delta® Conjunto de adaptador para tubo de salida - Bañera tipo romana - R2700
Precio de lista: $40.45
Acabados estándar
RP40509
View Product
![Image-RP40507]()
Discontinuado
Delta®
Delta® Arandela inferior y cuerpo - Bañera tipo romana - R2700/R4700
Precio de lista: $6.45
Acabados estándar
RP40507
View Product
![Image-Master-RP6060]()
Delta®
Delta® Tuercas de bonete (2) - Para cocina o baño de dos manijas
Precio de lista: $21.85 - $38.20
Free Ground Shipping All Orders $49+
Acabados estándar
RP6060
View Product
![Image-RP24096]()
![Secondary Image-RP24096]()
Delta®
Delta® Conjunto de unidad de vástago
Precio de lista: $38.55
Precio en línea: $29.36
Free Ground Shipping All Orders $49+
Acabados estándar
RP24096
4.60 42
View Product
![Image-RP40505]()
Delta®
Delta® Arandela superior y cuerpo - Bañera tipo romana - R2700/R4700
Precio de lista: $9.85
Precio en línea: $7.52
Free Ground Shipping All Orders $49+
Acabados estándar
RP40505
View Product
![Image-RP40616]()
Delta®
Delta® Tapón de prueba - Bañera tipo romana - R2700
Precio de lista: $14.45
Precio en línea: $11.00
Free Ground Shipping All Orders $49+
Acabados estándar
RP40616
View Product
![Image-RP40506]()
Discontinuado
Delta®
Delta® Arandela inferior y tubo de salida - Bañera tipo romana - R2700/R4700
Precio de lista: $6.45
Acabados estándar
RP40506
RESEÑAS
Rated 3 out of
5
by
SG from
Delta R2707 Solder Roman Tub filler rough in valve
My plumber insists on Delta products but he was frustrated by this unit. He said the older version of the Roman Tub faucet/valves took much less time and trouble to install.
Date published: 2025-04-01
Rated 2 out of
5
by
Sides from
Functional with effort
Doesn't offer much movement option for getting the angle to match the proper faucet handle placement.
Date published: 2025-03-18
Rated 5 out of
5
by
Theresa from
The Best!
Love your products and service!!!!Nowhere has the selection you do. I would nog shop anywhere else.
Date published: 2024-02-20
Rated 5 out of
5
by
Dave from
Roman tub faucet
Chosen for the quality, gpm, shorter overall spout length. My wife is happy, thanks
Date published: 2024-02-15
Rated 4 out of
5
by
JoeSip from
Good
Copper fittings did not sweat very well despite doing this for years.
Date published: 2023-03-25
Rated 1 out of
5
by
Terrif from
Didn’t fit in our space
Didn’t work for us. Too big to fit through standard sized holes in the tub deck.
Date published: 2023-03-25
Rated 5 out of
5
by
Gene from
Great Cusomer Service
Worked with Talitha to replace a part for my Roman Tub Faucet, she was very helpful and knowlegable. Makes me happy with my Delta faucets
Date published: 2021-10-14
Rated 1 out of
5
by
Linda from
After receiving the valves, the faucet was disc
The Faucet that we had to order these valves for were discontinued, so we had to return the valves
Date published: 2021-08-14
Preguntas y respuestas
What is the flow rate at 60 psi?
Hi Barry,
Thank you for your question. The flow rate at 60 PSI is 18 GPM.
Best Regards,
Courtney
Date published: 2024-03-28
IS THERE AN EXTENSION KIT FOR THIS VALVE?
Hi MO,
Thank you for your question. We do not have an extension kit for this valve. The maximum deck thickness is 2 1/2". In a Standard Installation, this includes the complete mounting surface. In a Thick-Tile Installation, this does not include the plywood underlayment. Please click the link below to view the Installation Instructions for more information.
https://media.deltafaucet.com/MandI/80163%20Rev%20C.pdf
Best regards,
Jon
Date published: 2024-03-28
I have a Peerless Roman Tub trim kit (PTT298696) that recommends the Delta R2700 rough in. I'd like to confirm that's correct (verses R2707 or something else). I'm also interested in adding a hand shower. What's the best rough in for my application?
Thank you for your inquiry, Brad! The PTT298696 will work with either R2707 or the R2700 valve body assembly. However, these valve do not have hand shower connections, you would need to install a transfer valve with hand shower such as a Delta RP14979 or RP33791 model.
https://www.deltafaucet.com/bathroom/product/R2700
https://www.deltafaucet.com/bathroom/product/R2707
Best regards,
Tanya
Date published: 2024-03-28
Does the two handle flexible mount rough in R2707 work with a Roman tub hand shower trim T4738 if we do not plan to use the hand shower?
Hello Robert,
Thank you for your inquiry! Yes, the Delta Lahara Roman Tub Trim kit T4738 can be used with the Roman Tub Rough-In Valve R2707 without attaching the hand shower. However, the lift rod in the top of the spout will not be connected to anything.
Best regards,
Tanya
Date published: 2024-03-28
Im using the R2707 rough in valve on my roman tub. The original tube holes are 10 inch on center. How do I get the flex lines to fit
Thank you for your question, Bobby! The R2707 will work with installations ranging from 8"- 16" wide. Each valve has a flexible corrugated copper supply tube that can be gently bent to accommodate the existing holes. Please feel free to contact us directly if you have questions or need further assistance.
Best regards, Edward
Date published: 2024-03-28
Can this be roughed into a concrete slab?
Hi, JennyLynn!
Thank you for your question. We do recommend to install the R2707 in a deck mount that will have access for the supply lines under the valve body.
Best Regards,
Rosanna
Date published: 2024-03-28
IS THERE A PEX OPTION TO REPLACE THIS VALVE?
IM WANTING TO USE DELTA WINDEMERE AND WOULD LIKE A PEX ROUGH IN
Dear BO,
Thank you for your inquiry! We manufacture two Delta Roman Tub Rough-In R2707-MF and R2707-PX valves for PEX connection installation. The R2707-MF uses PEX cold expansion type connections and the R2707-PX uses PEX crimp ring type connections.
https://media.deltafaucet.com/SpecSheet/DSP-B-R2707-MF%20Rev%20A.pdf
Best regards,
Tanya
Date published: 2024-03-28
If using braided supply lines....
....do I need to convert up to 3/4" or are 1/2" lines acceptable for proper water flow?
Thank you for your question. 1/2" lines are acceptable for water flow when using Delta Faucet model # R2707.
Date published: 2024-03-28
What cartridge fits in this rough in?
Hi, John!
Thank you for your question. The Delta R2707 valve body uses RP24096 stem unit assembly. Here is a link to this part:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP24096
Best Regards,
Rosanna
Date published: 2024-03-28
I won't be installing the spout in between the two handles (spout's in the corner of the tub, handles on the outside edge). Is there any reason I can't install the handles closer together than 8" as long as there's enough clearance for the levers?
Hello!
Thank you for your question. We advise of the 8" minimum installation centers so that the supply lines have enough room under the deck.
Best Regards,
Rosanna
Date published: 2024-03-28
I am attempting to replace a Moen tub trim with a new Delta (Model #T2753) but the valve cartridges aren't compatible. Can I replace the Moen cartridges with Delta? What parts do I need? Or do I just need to go with a Moen trim?
Thank you for your question, raheath. You would need a Delta rough-in valve such as the R2707 in order to install a Delta Roman Tub Trim.
Best regards, Jon
Date published: 2024-03-28
Will this work for my Delta two handle roman tub trim model number BT2796?
Hi, Brittany!
Thank you for your question. The Delta BT2796 roman tub faucet will work with the R2707 rough valve body.
Best Regards,
Rosanna
Date published: 2024-03-28
When can I solder the R2707 connections?
I need to install the R2707 from the side of the deck which makes soldering the connections after everything is installed next to impossible. Is it possible to solder all the connections (including 1/2" male adapters for braided supply lines) outside of the deck and then install the entire assembly following the finished deck instructions? Of course connecting the braided supply lines would be the last step.
Hi bvendt,
Thank you for your question. The connections could be soldered before installing the valve into the tub, as long as the end valves are the correct distance apart, level, and oriented correctly. You would then remove the top washers, slide the entire assembly up through the deck, reattach the top washer, and tighten the jack screws.
Thanks,
Jon
Date published: 2024-03-28
cpvc plumbing coming from walls
I want to install a delta roman tub faucet and we have cpvc coming out of the walls, how do I do this with the copper rough in? I have a plumber but im supplying the materials and parts.
Hi Justin, Thank you for your question. You will want to ask your plumber his or her preference on making the transition between copper and cpvc. There are several different ways to make this connection requiring different parts.
Thanks,
Dave
Date published: 2024-03-28
Can R2707 rough-in valve set be installed over more than a 16" span?
We want to change our our Roman tub fixtures to the Delta Dryden set to match the rest of our bathroom fixtures. The R2707 rough-in valve set is spec'd for the Dryden fixtures; however, our current installation spans more than the 16" maximum called out in the R2707 installation instructions that I read online. Our tub set is installed with the supply valves on the front ledge of the tub, while the spout is located on the other side of the tub (see included photo).
Can this rough-in assembly still be used in our configuration? If not, what do you suggest?
Thank you for your assistance.
Thank you for your question. Delta Faucet model # R2707 has a normal range of 8-16 inches. However, you are able to use it longer than 16 inches with the knowledge that you will need extra hosing and plumbing that is not provided by us.
Date published: 2024-03-28
Can you please reply with list of all of your trim kits that will work with this rough-in kit (R2707). Thanks...
Hi, Thank you for your question. I do apologize for any confusion regarding your Delta product. We are happy to help!
Our website has all of our available trim kits for the R2700 rough-in. I have attached a link with all of our current two-handle roman tub trims kits.
https://www.deltafaucet.com/search-results?title=two-handle%20roman%20tub%20trim
Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday.
Best Regards,
Bethany
Date published: 2024-05-06
Is the cartridge available for purchase as a separate part, to refurbish an old faucet? I am assuming I would need two, one for each side. Correct? This is in reference to an R2707 Roman Tub Valve.
Hello Tracy,
Thank you for your question. The Delta Roman Tub Rough-In R2707 valve body uses RP24096 stem unit assemblies for both hot and cold water handles. There are also seats and spring in the valve underneath the stem. Here is a link to this valve parts diagram:
https://media.deltafaucet.com/PartsDiagram/DPD-B-R2707_A.pdf
Best regards,
Tanya
Date published: 2024-03-28
Can I install the R2707 kit using braided supply lines?
Can I install the R2707 kit using braided supply lines with a 1/2" male adapters soldered onto the kit pipes?
Thank you for your question. You can solder 1/2" male adapters on the the supply lines of the Delta Faucet model # R2707.
Date published: 2024-03-28
I purchased this kit, Delta Faucet Roman Tub Rough-In Valve. Is there a way to reverse the on and off positions without switching the entire value? The off position places the two handles back to back on the inside.
Thank you for your question, Steve! The stem unit assemblies used on the R2707 rough-in valve can be oriented to allow the handles to turn alternatively. The flat portion of the stem assembly will need to continue facing outward, however the raised portions, or "Stops" can be switched to the opposite side to accomplish this.
https://media.deltafaucet.com/PartsDiagram/DPD-B-R2707_A.pdf
Best regards, Edward
Date published: 2024-03-28
Do i have to install seperate anti-scald?
Hi, Doc2020!
Thank you for your question. If coding requires an anti scald guard for the Delta R2707 rough valve, we recommend the R2570-MIXLF which is sold separately. Here is a link to this unit:
http://specselectonline.com/SpecSelectUS.aspx?Page=Products&ProductLineID=140016&BaseID=R2570-MIXLF
Best Regards,
Rosanna
Date published: 2024-03-28
Can R2707 be installed over R2700 without modifying the deck?
I'm replacing R2700 with R2707, but the holes in the deck were cut for the old kit (1-3/4" and 1-1/4"). Will R2707 fit?
Hi Peter,
Thank you for your question. Please refer to the Technical Specifications (link below). The holes for a standard installation should be 1 1/2" in diameter.
http://www.deltafaucet.com/customersupport/documentation/r2707.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper
Best regards,
Jon
Date published: 2024-03-28
Whar diameter doles do I need?to install the R2707 components for my Delta Faucet
Hi Al,
Thank you for your question! The hole size will depend on the installation type you use. Please refer to the Maintenance & Installation Sheet for help determining if you will use a Standard or Thick Tile Installation.
https://media.deltafaucet.com/MandI/80163%20Rev%20C.pdf
A standard Installation will require 1 1/2" diameter holes. A Thick Tile Installation will require 2" holes.
Technical Specifications:
https://media.deltafaucet.com/SpecSheet/3-H_RT_R_SS.pdf
Best regards,
Jon
Date published: 2016-08-22
Our Delta Innovations Roman Tub faucet is deck mounted on a whirlpool tub. We want to re-use the faucet trim but refresh all the internal parts as we put in a new tub and deck. Will the Innovations faucet work with the R2707 and new stem parts, etc?
Hello Fran L,
Thank you for your question. If your current tub spout has a set screw on the back side of the spout, then any of our trim kits that start with a T27 will interchange with the R2707 Roman Tub Rough-In Valve.
Best regards,
Tanya
Date published: 2024-03-28
I am installing the R2707 kit in the deck for my new tub. Here's my question. The top of the deck is not tiled yet. Do I install the valve kit now and tighten/secure it to the unfinished (plywood w/backer board layer) or wait till tile is complete?
Thank you for your question, Bill! Please refer to the Installation Instructions linked below. There are two ways to install this valve.
A Standard Installation (see pages 3-4) would be used if the finished deck is 2 1/2" thick or less. For this type of installation, the valve is installed to the finished deck surface.
The Thick Tile Installation (pages 5-6) should be used for surfaces 2 1/2" thick excluding the plywood underlayment. For this type of installation, the valve should be mounted prior to the installation of the tile.
https://media.deltafaucet.com/MandI/X00080163_C.pdf
Best regards, Jon
Date published: 2024-03-28
Just to be sure, the Delta Innovations Roman Tub Trim has a Model # of 2730-CB, not T2730. It does have the set screw on the back side of the spout. Does the T just stand for TUB? Is T2730 and 2730 the same and will it work with the R2707 rough-in?
Thank you for your question, Fran L! Yes, the same R2707 valve is used with both models 2730-CB (trim and valve) and the T2730 (trim kit only). The "T" in front of the model number stands for Trim kit.
Best regards,
Tanya
Date published: 2024-03-28
I have a Delta T2778 faucet. Will the Delta R2707 rough in valve work with it?
Hi Mitch,
Thank you for your question. Yes, the rough-in valve R2707, has to be installed with your Delta Leland Roman Tub T2778 model to complete the installation.
Best regards,
Tanya
Date published: 2024-03-28
Can Delta roman tub faucets and spouts specified for a R2707 rough-in valve be used in an existing R2700 valve application?
I currently have what appears to be an R2700 roman tub rough-in valve and want to install a new Delta faucet. It seems all of the faucets I find require a R2707 valve. I have a perfectly good valve and don't want to change it out. If so, can the Porter oil rubbed bronze faucet set be purchased without the R2707 valve? Thanks for your assistance.
Hi Mike,
Thank you for your question. Models that work with the R2707 rough-in valve will also work with the R2700. Unfortunately, the Porter 37984-OB is only available as a complete set with the R2707 valve included.
Thanks,
Jon
Date published: 2024-03-28
Wall Mount R2707
Can the Delta R2707 (Spout & Handel Rough) be mounted on a wall? If no, can either the (Spout or Handle Rough) be mounted on a wall independently?
Dear JC,
Thank you for your question. The Delta Roman tub Rough in valve R2707 model is a deck mount only valve assembly. The supply lines on the valve parts are not designed for an In wall installation.
Best regards,
Tanya
Date published: 2016-09-04
Have R2707 kit. Deck is 3"thick. What to do?
Hi Jim,
Unfortunately Delta Faucet does not manufacture a thick deck extension kit for a roman tub rough. It's maximum deck thickness is 2 1/2".
Date published: 2024-03-28
I am looking at the Delta T2759-SS Trinsic Two Handle 3-Hole Roman Tub Faucet and was wondering what the difference is between the R2700 and R2707 valves? Is one valve preferred over the other?
Hello Bayway,
Thanks for your question. The R2700 has a maximum deck thickness of 1 1/4", but can be extended up to 2 1/4" with the RP18504 extension kit. The mounting nuts must be tightened from below the deck.
The R2707 has a maximum deck thickness of 2 1/2". The mounting washers can be tightened from above the deck using the jack screws.
Best regards,
Tanya
Date published: 2024-03-28
Información especial
ADVERTENCIA de la Proposición 65 de California
ADVERTENCIA DE LA PROPOSICIÓN 65 de California
Este producto puede exponerle al plomo, que según el estado de California causa cáncer y anomalías congénitas u otros daños reproductivos.
Para obtener más información, visite http://www.P65Warnings.ca.gov.
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.