Trinsic®
Ver toda la colección para baño Trinsic®

Llave para baño independiente de dos manijas en Champagne Bronze

N.º de modelo: 3559-CZMPU-DST
Agregar a favoritos
Busque instaladores locales de Delta®
Trinsic®
Ver toda la colección para baño Trinsic®
Llave para baño independiente de dos manijas en Champagne Bronze
N.º de modelo: 3559-CZMPU-DST
Precio de lista: $57805
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
Las llaves con tecnología de sellado DIAMOND™ Seal de Delta® funcionan como si fueran nuevas de por vida porque cuentan con un diseño patentado gracias al cual se reducen los puntos de fuga, la instalación es más sencilla y duran el doble que el estándar de la industria*. Los acabados Brilliance® están diseñados para lucir como nuevos de por vida. Se desarrollan mediante un proceso patentado que crea un acabado duradero garantizado contra la corrosión, la pérdida de brillo y la decoloración. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida. Las llaves, las duchas y los inodoros con clasificación WaterSense de Delta usan al menos 20% menos agua que los productos estándar de la industria y le ahorran dinero sin sacrificar desempeño. *Estándar de la industria basado en ASME A112.18.1 de 500,000 ciclos.
  • La tecnología de sellado DIAMOND es más fácil de instalar y ayuda a su llave a funcionar como si fuera nueva toda la vida, ya que reduce los puntos de fuga y dura dos veces más que los productos estándar de la industria
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex
  • Instalación con 3 orificios de 4-16"
  • Emergente de metal
  • Cumplimiento con la ADA
  • Las llaves con clasificación WaterSense® usan al menos 20 % menos agua que los productos estándar de la industria sin sacrificar desempeño
Ecológica
Con etiqueta WaterSense®
Technology and Special Features
Cumplimiento con la ADA
Libres de plomo
Acabado Brilliance®
Uso eficiente del agua
Tecnología de sellado Diamond Seal®
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver especificaciones técnicas
Ver hoja de mantenimiento e instalación
Ver diagrama de repuestos y accesorios
Registrar su producto
Recursos
Archivos de diseño
Información de instalación
Instalación con 3 orificios de 4-16"
Overall Height (in.) :
7 3/4
Voltaje:
0
Caudal:
1.20 gpm a 60 psi, 4.5 l/min. a 414 kPa
Tipo de válvula:
Disco cerámico

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Explorar videos
LISTA DE PIEZAS

LISTA DE PIEZAS

1 2 >
Image-RP73805

Trinsic®

Trinsic® Aireador y llave inglesa, consumo eficiente de agua, 1.0 GPM

Precio de lista: $23.25
Precio en línea: $18.60
Envíos sin cargo para todos los pedidos de más de $49

RP73805

5.00 2
Image-RP73806

Trinsic®

Trinsic® Aireador y llave inglesa, consumo eficiente de agua, 0.5 GPM

Precio de lista: $23.25
Precio en línea: $18.60
Envíos sin cargo para todos los pedidos de más de $49

RP73806

Discontinuado
Discontinuado
Image-RP62378
Discontinuado

Leland®

Leland® Bujes

Precio de lista: $24.15
Acabados estándar

RP62378

Discontinuado
Discontinuado
Image-RP60352
Discontinuado

Leland®

Leland® Tuercas cubiertas (2)

Precio de lista: $24.15
Acabados estándar

RP60352

Image-RP60457

Leland®

Leland® Conector W

Precio de lista: $36.15
Precio en línea: $28.92
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP60457

Image-RP25620

Delta®

Delta® Tornillo de fijación

Precio de lista: $5.35
Precio en línea: $4.28
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP25620

4.00 11
Image-RP5648CZ

Delta®

Delta® Tapón de desagüe (baño)

Precio de lista: $41.55
Precio en línea: $33.24
Envíos sin cargo para todos los pedidos de más de $49

RP5648CZ

4.71 7
Image-RP12517

Delta®

Delta® Varilla horizontal

Precio de lista: $18.80
Precio en línea: $15.04
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP12517

2.80 5
Image-RP73590

Trinsic®

Trinsic® Válvula de extremo - Independiente

Precio de lista: $146.30
Precio en línea: $117.04
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP73590

Image-RP47030

Leland®

Leland® Llave inglesa de baño

Precio de lista: $8.30
Precio en línea: $6.64
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP47030

1.00 2
Image-RP12516

Delta®

Delta® Abrazadera con tornillo

Precio de lista: $15.40
Precio en línea: $12.32
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP12516

Image-RP6142

Delta®

Delta® Junta

Precio de lista: $10.30
Precio en línea: $8.24
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP6142

Image-Master-H258PC

Trinsic®

Trinsic® Kit de manija

Precio de lista: $194.90 - $273.70
Acabados estándar

H258PC

Image-RP6140

Delta®

Delta® Tuerca y arandela - Conjunto de desagüe

Precio de lista: $20.90
Precio en línea: $16.72
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP6140

Image-Master-RP72131SS

Delta®

Delta® Cubiertas decorativas InnoFlex® - Vinilo

Precio de lista: $12.15
Acabados estándar

RP72131SS

Image-RP73166CZ

Trinsic®

Trinsic® Base para manija y junta

Precio de lista: $62.65
Precio en línea: $50.12
Envíos sin cargo para todos los pedidos de más de $49

RP73166CZ

RESEÑAS
Rated 5 out of 5 by from Good price, good quality Delta always gives the look, the price, the quality required for our client projects
Date published: 2024-09-17
Rated 5 out of 5 by from Love this new faucet Sleek look, and the handles turn easily. This bathroom gets a lot of use, and I feel it's up to the task.
Date published: 2024-07-04
Rated 3 out of 5 by from Pretty but not spectacular Two things I do not like about this faucet. One when you wash your face water gets everywhere. I never experienced this before so it must be how the faucet sits in the sink. Second for the cold water side only turning the water off you have to turn it back and forth for the water flow to stop. Look wise it is pretty.
Date published: 2024-06-11
Rated 4 out of 5 by from Very Nice, but drain pull hits wall Beautiful faucet, nice and substantial, quality. My only problem was that the drain pull comes out at too much of an angle and hits the backsplash on the wall. I can't use the drain, had to buy a pop up.. aside from that I love it.
Date published: 2024-06-10
Rated 1 out of 5 by from Bad Rod Lift My contractor installed this faucet with the rod lift. The rod lift is almost impossible to lift and once it does, the paint is scraped off the rod. The contractor adjusted multiple time with no luck of correcting the issue. So, I have an expensive faucet with the rod lift that is not working and with paint scraped off down to the metal. The cost of this faucet one would think it would work properly. I guess I need to replace the rod lift then not use it. The faucet was purchased from a plumbing supply house.
Date published: 2024-05-30
Rated 1 out of 5 by from Great Faucet- Bad supply line design Purchased this faucet and installed about a year ago on bathroom remodel. I installed per the directions as I have done on numerous other faucets. 2 weeks ago I woke up at 3:15 am to hear water flowing in my downstairs. Came downstairs and bathroom, bedroom, computer room, kitchen and back addition were flooded and went through into basement flooding that. I immediately checked the bathroom to find the hot side supply line had pulled out of the valve. Why not have a line that just screws onto the valve instead of a plastic line and plastic compression fitting?. I believe from expansion and contraction of hot water over time it came out. I will be getting rid of this faucet a going with another brand that has screw in lines. Already cost me thousands in damage upstairs and in basement. Bathroom in basement ceiling caved in and everything had to be ripped out.
Date published: 2024-04-20
Rated 5 out of 5 by from Oil rubbed bronze faucet Great quality solid faucet- very happy with the look and the heft of this faucet.
Date published: 2024-02-04
Rated 3 out of 5 by from Home owner The rod that pull the drain plug is hard to open and close
Date published: 2024-01-10
  • y_2024, m_11, d_23, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_108
  • loc_en_US, sid_3559-CZMPU-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

does this particular faucet have a plastic or brass rough valve?

Asked by: MamaEE
Thank you for your question, MamaEE! Model 3559-CZMPU-DST uses both metallic and non-metallic components to ensure the longest lasting, highest grade product possible. The valve itself will be metallic however inside the valve we use Pex waterways so that at no time will water ever come into contact with metal. Please click on the link below for more information on DST technology. https://www.deltafaucet.com/design-innovation/innovations/kitchen/diamond-seal-technology Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a wall mount version of this faucet?

Asked by: Jeremy
Dear Jeremy, Thank you for your inquiry. The Delta Trinsic collection only has one Wall Mount Lavatory faucet, model number is T3559LF-CZWL. This is a single handled faucet. https://www.deltafaucet.com/bathroom/product/T3559LF-CZWL Best regards, Tanya
Answered by: Tanya
Date published: 2016-11-05

Hi, I have just purchased this faucet, the supply lines are too long & I have an exposed vanity (planning on installing the decorative covers). Is there a way to shorten the supply lines?

Asked by: Phillip
Hello Phillip, Thank you for your inquiry! The supply lines of the Delta Trinsic Lavatory 3559-CZMPU-DST faucet can be Looped with a standard connection install or a Custom Cutting to Fit connection install. Please see pages 5 and 6 of the below Maintenance/Installation document link for both styles of installation. https://media.deltafaucet.com/MandI/X00072545_E.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

We somehow lost 1 of the faucet handles. Are we able to special order a replacement handle? If so, do you have the part number?

Asked by: Matt
Thank you for your question. The handles come in a set and are sold as part number H259CZ. You can order these directly from the warranty center by calling 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

Do the matte black faucets have to have the red and blue dots on them or are those optional? Many of them completely ruin the design. 

Asked by: Bethany
HI Bethany, Thank you for your inquiry! The red and blue indicator buttons for the Delta Trinsic Lavatory 3559-MPU-DST model are not offered in another color currently. We apologize for any inconvenience this may cause. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-04-18

I don't have the 2.5 inches clearance to backsplach. More like 1.5 inches. Is there another plug I can substitute (chrome) that does not require a drain pull lever? Or does Delta make widespread faucets requiring less clearance?

Asked by: eileen
Hi, Eileen! Thank you for your question. Unfortunately, there is not a drain plug that can be substituted for the lift rod for this faucet. We recommend to clearance to back splash for the installation above the sink as well as installation below the sink. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

We are having an issue getting the handles to sit flush on the base.  It seems like they won’t push down completely leaving a visible gap btw the bottom of the handle & base. We received a replacement set of handles, but has same result. Help!

Asked by: Kate
Hi, Thank you for contacting us. We apologize for any inconvenience. We are more than happy to help you. The end valve the handles sit on can be lowered so the handles will sit flush with the counter top. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2024-03-28

Does the handle have 2-finishes?

It appears from the pictures that there are 2 finishes - almost a matte finish around the temperature dot -- or is it solid polished chrome?
Asked by: Matt
Hi Matt, Thank you for your question. This unit will have only one finish color. The 3559-MPU-DST is all Chrome. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28
  • y_2024, m_11, d_23, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_109
  • loc_en_US, sid_3559-CZMPU-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 45ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.