Monitor® 14 Series H₂Okinetic® Single Handle Tub & Shower Trim in Polished Nickel

Thank you for your question, SFRemodel. You can find our Bath Waste Assemblies at the link below. Please check the dimensions of your tub to ensure that it will work in your installation. https://www.deltafaucet.com/search-results?searchTerm=bath+waste+assembly Best regards, Jon

Hi R-hung, Thank you for your question. The U4929-CZ-PK will attach to your current shower arm and allow you to then connect your current showerhead and the 57923-CZ wall mount hand shower to the diverter. The diverter will allow you to use each showerhead individually or both at the same time. You will not need any other parts. Thanks, Dave

Thank you for your question, Whitney! Only one MultiChoice R10000 Tub/Shower Rough-In Valve is needed to install this trim. Best regards, Jon

Hi Timt, Thank you for your question. The handle, escutcheon plate, and shower arm of the Delta Trinsic Tub and Shower T14459 faucet model are metal. The shower head and tub spout have non-metallic components. Best regards, Tanya

Hi, Amanda! Thank you for your question. the Delta RP61273 shower arm will work with the shower head from the Monitor T14459-BL trim kit. Best Regards, Rosanna

Hi, Jay Dee! Thank you for your question. The Delta Monitor T14459 Tub and Shower unit is designed without screw covers to conceal the screws. We do apologize for any inconvenience this may cause. Best Regards, Rosanna

Hi, RenoNewbie! Thank you for your question. The Delta Monitor T14459-BL tub and shower trim kit can be used with the Delta 58472-BL In2ition 2-in-1 shower unit. Best Regards, Rosanna

Hello T Robert, Thank you for your inquiry! The Delta Trinsic Tub and Shower Trim T14459 is designed with a constant volume water flow and the handle controls the temperature. The Delta Trinsic 17 series T17459 has a volume and temperature control that move independently of each other. https://www.deltafaucet.com/bathroom/product/T17459 Best regards, Tanya

Thank you for your question Kevin! This tub spout is only designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw as seen on page 5 module 2 C-1 of the maintenance and installation manual (link below). The o-ring inside the tub spout will provide a proper seal. There is no soldering required for this tub spout. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best regards, Antoine

Hi Ryan, Thank you for your question. The RP46074 is the cartridge that will ship with the T14459-SS trim. Your existing 1300/1400 series faucet which was made prior to 2006 should use the RP19804 cartridge. Thanks, Dave

Thank you for your question, Christopher! I apologize for any confusion however as point of fact, all Delta products with the same model number will be the exact same product in both appearance and materials regardless of where they are purchased. Prices are set by dealers, so they can vary and occasionally minor changes are made to a product however our faucets are all made with the same high quality standard and come with a Lifetime Warranty. We also use various materials and innovations to provide long-lasting, affordable products that are easy to maintain. This model will have both metallic and non-metallic components as a result. Best regards, Edward

Thank you for your question, Trim Less Showerhead! You have a slip on tub spout if your kit included the slip on adapter, part number RP33794, which will only work on smooth 1/2" copper pipe. Best regards, Edward

Thank you for your question, MadisonRN. Unfortunately, we do not currently make a Matte Black version of the drain or overflow plate. Best regards, Jon

Hello Remy, Thank you for your question. The handle, escutcheon plate, and shower arm of the Delta Trinsic Tub and Shower T14459-CZ faucet model are metal. The shower head and tub spout have non-metallic components. Best regards, Tanya

Hello dbdl, Thank you for your question about the Delta Faucet model T14459-BL TRINSIC® Monitor® 14 Series H2Okinetic® Tub & Shower Trim. I apologize for any difficulty finding this information. We are happy to help! Please see the instructions for adjusting the rotational limit stop on pages 9 and 10 of the installation manual. The rotational limit stop is a safety feature that limits the maximum amount of hot water that can be mixed by limiting how far the handle can turn. https://media.deltafaucet.com/MandI/107528%20Rev%20D.pdf Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Thank you for your question, Abug! The handle on model T14459 rotates 120° from the off position, to the hottest setting. Best Regards, Benjamin

Hello Noah, Thank you for your question about the Delta Faucet model T14459-BL TRINSIC® Monitor® 14 Series H2Okinetic® Tub & Shower Trim. I apologize for any difficulty finding this information. We are happy to help! The included RP6023BL shower arm is 5.5". The model RP40593BL shower arm is available in matte black and is 7" long. https://www.deltafaucet.com/parts/product/RP40593BL.html#undefined Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hi ritwikzzz, Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you. Unfortunately, the Delta Faucet Trinsic® Monitor® 14 Series H2Okinetic® Tub & Shower Trim In Chrome MODEL#: T14459 does not have an aerator connection. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello Phil, Thank you for contacting us, I would be happy to help you. Our Delta shower cartridge controls the water flow, when the handle is a full off position the water will shut off. On the T14459-BL the handle will be off, in a full clockwise position. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hello, mcrankin08! Thank you for your question! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Trinsic® Monitor® 14 Series H2Okinetic® Tub & Shower Trim In Champagne Bronze MODEL#: T14459-CZ Tub port maximum flow rate is 6.0 GPM @ 60 psi with R10000-UNBX. The showerhead's maximum flow rate is 1.75GPMm @ 80 psi. Please see the specification sheet with the information in the link below. https://media.deltafaucet.com/SpecSheet/DSP-B-T14059%20Rev%20L.pdf Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if there is anything else you need. Best Regards, Themar

Hello Mariangela! Thank you for contacting us at Delta Faucet! I will be happy to help! Unfortunately, no. You will need to install a new R10000-UNBX rough-in valve in order to update to this Trinsic tub and shower trim kit. We apologize for any inconvenience this may have caused. Please contact us directly if further assistance is needed at this time.  Best Regards, Tim

Hi! Thank you for your question! Yes, you can use the RP12307 adapter as long as the total length of the copper line coming from the wall to the end of the threading is between 5/8" and 1 5/8". Best Regards, Tim

Hello BC01, Thank you for contacting us, I would be happy to help you. Our R10000-UNBX is a universal valve, which will accept any current trim kit. Please contact us back if you have any questions or need further assistance. Best Regards, Nicole

Hello JW811, Thank you for contacting us, I would be happy to help you. Model T14459-BL has RP73371RB tub spout Which is only designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Ryand, Thanks so much for contacting Delta Faucet Company! The TRINSIC® Monitor 14 Series Tub & Shower Trim MODEL#: T14459-BL can use the Extension Kit MODEL#: RP77991. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Mónica Morales, thank you for your interest in the T14459-SS! Our warranty does not cover outdoor installation. For finishes, use chrome for most durability, or PVD finish as a second choice. Maintain the faucet with temperature and weather in mind. Testing our finishes for outdoor weather ability is currently not in our performance specifications. The polished chrome finish has the best chance of withstanding the outdoor elements, followed by the PVD finishes. Our organic finishes like Venetian Bronze and Matte Black may not hold up well to outdoor exposure. Components must also be protected against damage from freezing water. Our warranty doesn’t cover damage caused by outdoor installations. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hello Mike, Thank you for your question! I am happy to help you! We do not currently have a bath waste in BL to match our Delta Faucet TRINSIC® Monitor® 14 Series H2Okinetic® Tub & Shower Trim MODEL#: T14459-BL, I am sorry for any inconvenience this may have caused. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hello Randy, Thank you for contacting us, I would be happy to help you. I have attached a link below on how to adjust the RLS located on your cartridge, This will help in changing the temperature. https://www.youtube.com/watch?v=By5b7uazCqM Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hello Bread, Thank you for your question. We are happy to help! The RP73371CZ tub spout includes the RP33794 for a slip-on installation to 1/2" copper pipe. The pipe should be 2-4" long from the wall. The adapter slips onto the pipe and is tightened with the set screw. The tub spout is then screwed onto the adapter. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! Our 1300 and 1400 series showers do not have a separate control handle for the flow and temperature. These models are indicated with model numbers starting with 13/14 or T13/T14. Our 17000 series indicated by 17/T17 or 17T/T17T do have individual control handles. Please reach out directly with further questions. Best Regards, Kayla