Delta®
Single Handle Floor Mount Tub Filler Trim with Hand Shower in Matte Black
N.º de modelo: T4759-BLFL
- CARACTERÍSTICAS DEL PRODUCTO
- Documentos y especificaciones
- RESEÑAS
- Preguntas y respuestas
- LISTA DE PIEZAS
CARACTERÍSTICAS DEL PRODUCTO
Complete su baño con una llave para bañera tipo romana de Delta de hermoso diseño, cuidadosamente elaborada para llamar la atención y mejorar su experiencia. La ducha manual incluida la convierte en una adición versátil para su baño, ideal para enjuagar y lavar a sus seres queridos y mascotas o para mantener limpia la bañera. El negro mate da personalidad a su espacio, genera un aire sofisticado y combina perfectamente con casi todos los demás detalles y accesorios. Con tonos brillantes, el negro mate es innegablemente moderno con un fuerte contraste, pero también puede complementar espacios tradicionales o de transición cuando se combina con colores neutros cálidos para brindar una sensación rústica similar al hierro fundido. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida.
- Ducha de mano a juego incluida
- Los suaves orificios de rociado de goma Touch-Clean le permiten limpiar fácilmente toda la acumulación de calcio y cal del frente de la regadera y de la ducha de mano con tan solo deslizar el dedo
- Los ajustes de rociado incluyen: Rociador para cuerpo entero
- El rociador para cuerpo entero ofrece una cobertura total constante, ideal para todas las necesidades a la hora de ducharse, desde enjuagar el champú del cabello hasta relajar los músculos cansados
- Cumplimiento con la ADA
- Juego de terminaciones solamente; se debe comprar el R4700-FL interior por separado para completar la unidad
- La ducha de mano incluye válvulas de doble verificación para evitar el retorno del agua
- Instalación con un solo orificio
- El tubo de salida de tina de arco elevado gira 360 grados
Información especial
ADVERTENCIA de la Proposición 65 de California
ADVERTENCIA DE LA PROPOSICIÓN 65 de California
Este producto puede exponerle al plomo, que según el estado de California causa cáncer y anomalías congénitas u otros daños reproductivos.
Para obtener más información, visite http://www.P65Warnings.ca.gov.
Ecológica
Con etiqueta WaterSense®
Technology and Special Features
Cumplimiento con la ADA
Cumplimiento con la ADA
Algunas personas y códigos locales requieren que los artefactos cumplan con la Ley para estadounidenses con discapacidades (Americans with Disabilities Act). Si es posible que reciba visitas de personas con capacidades especiales o si cree que sus futuros clientes podrían apreciar esta función, Delta ofrece diversos artefactos que cumplen con esta ley.
Touch-Clean®
Touch-Clean®
Orificios de rociado de caucho que permiten una fácil limpieza simplemente deslizando el dedo.
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Recursos
Información de instalación
Instalación con un solo orificio
Overall Height (in.) :
41
Voltaje:
0
Caudal:
1.75 gpm a 80 psi, 6.6 l/min. a 552 kPa
Tipo de válvula:
Cartucho con equilibrio de presión de función única
SOPORTE PARA LA INSTALACIÓN
¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.
¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.
LISTA DE PIEZAS
LISTA DE PIEZAS
View Product
![Image-RP22734]()
Delta®
Delta® Bonete
Precio de lista: $14.75
Precio en línea: $11.80
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP22734
4.45 11
View Product
![Image-RP74819]()
Trinsic®
Trinsic® Tuercas y arandelas, montaje
Precio de lista: $12.40
Precio en línea: $9.92
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP74819
View Product
![Image-Master-RP74809PCPR]()
Tetra®
Tetra® Finial
Precio de lista: $17.60 - $29.65
Envíos sin cargo para todos los pedidos de más de $49
Acabados Lumicoat
Acabados estándar
RP74809PCPR
View Product
![Image-Master-RP74808]()
Delta®
Delta® Ducha manual - Conjunto de soporte
Precio de lista: $116.15 - $145.10
Envíos sin cargo para todos los pedidos de más de $49
Acabados Lumicoat
Acabados estándar
RP74808
View Product
![Image-Master-RP74818]()
Delta®
Delta® Manguito de accesorio - Llave de llenado para bañera de montaje en piso
Precio de lista: $20.90 - $36.55
Envíos sin cargo para todos los pedidos de más de $49
Acabados Lumicoat
Acabados estándar
RP74818
View Product
![Image-RP23336]()
Delta®
Delta® Junta tórica - Grande - Todas las series Monitor®
Precio de lista: $6.40
Precio en línea: $5.12
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP23336
5.00 5
View Product
![Image-RP25620]()
Delta®
Delta® Tornillo de fijación
Precio de lista: $5.35
Precio en línea: $4.28
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP25620
4.00 11
View Product
![Image-RP4993]()
Delta®
Delta® Asientos y muelles (2 c/u)
Precio de lista: $8.85
Precio en línea: $7.08
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP4993
4.69 97
View Product
![Image-RP51287]()
Lahara®
Lahara® Juego de enderezador de chorro, bañera tipo romana
Precio de lista: $20.10
Precio en línea: $16.08
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP51287
5.00 1
View Product
![Image-RP46074]()
![Secondary Image-RP46074]()
Delta®
Delta® Conjunto de cartucho - Válvula universal MultiChoice® - Series 13/14
Precio de lista: $103.90
Precio en línea: $72.73
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP46074
2.30 79
View Product
![Image-RP73598]()
![Secondary Image-RP73598]()
Classic
Classic Cartucho, sin presión balanceada, serie 1300
Precio de lista: $38.40
Precio en línea: $30.72
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP73598
View Product
![Image-RP14414]()
Delta®
Delta® Juntas tóricas (2) - Series 13/14
Precio de lista: $3.85
Precio en línea: $3.08
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP14414
5.00 2
View Product
![Image-RP74810]()
Trinsic®
Trinsic® Conjunto de desviador - Llave de llenado para bañera de montaje en piso
Precio de lista: $36.90
Precio en línea: $29.52
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP74810
5.00 1
RESEÑAS
Rated 5 out of
5
by
Jf91560 from
Functional and beautiful
Awesome piece and easy to install highly recommend this piece of art
Date published: 2024-10-21
Rated 5 out of
5
by
JM from
Perfect
The tub filler is very attractive and works great. I was worried it would have low water pressure since Delta tends to be more conservative with their restrictors but it fills my large tub very quickly. The hose has a good spray and is more than long enough.
Date published: 2024-08-08
Rated 5 out of
5
by
Sheri Kelly from
Sleek, modern, and functional!
Love how modern and sleek this Delta faucet is! It coordinates with our Delta faucet in the shower easy to use and like the removable shower wand fur rinsing or cleaning the tub.
Date published: 2024-07-22
Rated 2 out of
5
by
JPMalone from
Not worth the price…
There are a few flaws that make this unit not worth the hefty price tag. Tub filler leaks, shower wand leaks, diverter nob wears out quickly… Seats and springs will need replacing often -“as will the diverter knob. Would not recommend for a daily use tub.
Date published: 2024-07-15
Rated 3 out of
5
by
NickB from
Love the look but several leaking problems
We finished out our house (5 bathrooms, laundry room, and kitchen) in Delta Trinsic faucets 2 1/2 years ago. We love them all expect the bathroom floor tub filler. After about 6 months it started leaking from the main faucet and we got that fix by our home builder still under the 1 year warranty. But now the wand is leaking and can't get it to stop. We current have to let it hang in the tub every time we use it, which is annoying and doesn't look good. So every time I turn the main facet on the hand held wand drips water also. I've looked for a plug to just remove the wand, but can't seem to find one in the parts list. For a $2,000 facet you'd expect it to work.
Date published: 2024-07-15
Rated 3 out of
5
by
Nick from
Leaking like a lot of other reviews
We’ve been in our house for about 3 years. The previous owners redid the bathroom at some point. Our wand leaks because of the diverted valve also. I’m not seeing replacement valves and the little piece looks like more than an O-ring. Stinks because these are expensive.
Date published: 2024-06-24
Rated 5 out of
5
by
G Stub from
Excellent product
Excellent product and fast delivery
Date published: 2024-05-31
Rated 2 out of
5
by
Chris from
Leaking wand and diverter valve
I have a very similar issue to most people writing reviews. The wand and diverted valve leaks allow water to pool on my baseboards and under the tub base. I am very frustrated with an expensive, beautiful-looking filler.
Date published: 2024-04-30
Preguntas y respuestas
My plumber is telling me it will cost more to install this b/c of code requiring back flow prevention also being installed - does this come with vacuum / back flow prevention?
Hi, BRGKMK!
Thank you for your question. The T4759-CZFL does include back flow prevention.
Best Regards,
Rosanna
Date published: 2024-03-28
Can this tub filler be ordered without the hand held shower?
Trinsic Floor mounted tub filler
Dear Barbra,
Thank you for your question. All of the Delta Floor Mount Tub Filler Trim kits come with a handheld hand shower. The handheld is not sold separately.
Best regards,
Tanya
Date published: 2017-03-07
What do you mean by "valve not included" on the T4759-FL? I know I need the R4700-FL to mount it to the floor, but do I also need to order a hot/cold valve (RP46074) to go inside the stand?
Hello Brian,
Thank you for your inquiry! The valve cartridge assembly RP46074 does come with the Delta Trinsic Roman Tub Trim T4759-FL. The R4700-FL does not come with the trim kit, it has to be purchased separately.
https://media.deltafaucet.com/PartsDiagram/DPD-B-T4759-FL_A.pdf
Best regards,
Tanya
Date published: 2024-03-28
Do I need a overflow/drain to match T4759-SSFL? I know depending on tub but I cant find an options for this.
Hi Matt, Thank you for your question!
None of our bath waste assemblies are included with our tub units. We do not manufacture roman tub/Jacuzzi bath waste assemblies. However, we do manufacture standard tub/shower bath waste. Below is a link to the ones we offer:
http://www.deltafaucet.com/search/results.html?q=bath+waste
Best regards,
Brandis
Date published: 2024-03-28
Not enough hot water- can i adjust
On the hottest setting the water is under 100 degrees, we are forced to fill a bucket in the shower to fill the tub. How can I adjust the flow? This unit was installed previous to our ownership. Thanks.
Hi John, Thank you for your question. The cartridge in the model 4759-FL is equipped with a rotational limit stop that allows you to set the max hot water temperature. Page 7 of the attached manual will show you how to make the adjustment to raise the water temperature.
http://www.deltafaucet.com/customersupport/documentation/t4759-fl.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper
Thanks,
Dave
Date published: 2024-03-28
I have an old house and the hot water flow is lessening now on my Delta T4759/R4700-FL. Is there a "grit" screen to clean on the tub filler like there is on my kitchen sink? If so, where is it, and how can this be accomplished? Thanks very much!
Thank you for your question, DDDD! I do apologize for any issue you may be having with this tub filler, but will be more than happy to help! There is a rotational limit stop on the cartridge, which may need to be readjusted seasonally. Run the water so that the cold water is as cold as it will get, and then run the hot water until is as hot as it will get. Pull the white Rotational Limit Stop outward and rotate. Clockwise rotation will decrease the outlet temperature, counterclockwise rotation will increase the outlet temperature.When finished, make sure that the Rotational Limit Stop is fully retracted into the seated position. Place the handle on the stem, and rotate the handle counterclockwise until the handle stops. I have included a link to the maintenance and installation sheet, for you to refer to. If you need further assistance, feel free to contact us directly.
https://media.deltafaucet.com/MandI/74820%20Rev%20G.pdf
Best Regards, Benjamin
Date published: 2024-03-28
Hot is Cold
We have this floor mounted faucet but when
we turn it on it comes out hot first and if we keep
turning it goes to cold. Is it possible that it is
mounted 180 degrees out? Can we just lift
It up and rotate it? It is mounted on the left
side of the tub. I heard somewhere that it should
Be mounted on the right side of the tub but
That would reduce the design possibilities.
Thank you for your inquiry, Schuffy! We would advise removing and rotating the valve cartridge assembly 180 degrees and reinstalling it. This should allow the cold water to run first, out of your Delta Contemporary Floor Mount Roman Tub T4759-FL model.
Best regards,
Tanya
Date published: 2024-03-28
Dumbest question. Have the Cassidy freestanding tub filler installed and it has one handle for on/off water flow. How do I get temp control? Handle doesn’t turn any further than “water on.”
Hi Emma,
Thank you for you question. The cartridge assembly of the Delta Contemporary Floor Mount Tub Filler T4759-FL model is equipped with a rotational limit stop that allows you to set the max hot water temperature. Page 7 of the attached manual will show you how to make the adjustment to raise the water temperature. You would push the handle away from the faucet, to turn it on, then rotate it forward or backward to adjust for hot and cold temperature.
http://www.deltafaucet.com/customersupport/documentation/t4759-fl.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper
Best regards,
Tanya
Date published: 2024-03-28
can the hand shower and turn on be switched?
Hello, I was wondering if the handle to turn on the tub filer and the hand shower can be swapped around, I see in the photo that the hand shower is on the left and I need it to be on the right, is this possible?
Hi Dab,
Thank you for your question. Unfortunately, the hand shower and handle cannot be switched around.
Best regards,
Jon
Date published: 2024-03-28
Are there shorter main tubes for this unit?
This is the standard 31mm tube and it is too tall for our tub, causing lots of splashing in and out of the tub.
Hi, BJ & Jean!
Thank you for your question. Unfortunately, we do not have a shorter main tube for this tub filler.
Best Regards,
Rosanna
Date published: 2017-07-20
I am purchasing the Floor mount tub filler: Trinsic T4759-BLFL with the Trinsic rough #R4700-FLWS to be installed in a raised foundation room...do I also need the mounting plate rough? RP74813 (The existing floor will be removed for new tile floor)
Hi, Cat R!
Thank you for your question. The RP74813 mounting plate will need to be installed. You can view the manual and installation instructions here:
https://media.deltafaucet.com/MandI/74821%20Rev%20D.pdf
Best Regards,
Rosanna
Date published: 2024-03-28
The water temperature on this item does not get nearly as hot as the rest of my bathroom. I have the entire Trinsic line on both my sinks and shower, however when filling the tub the hot water is warm at best. How do I fix this?
Hi, Destined512!
Thank you for your question. The valve cartridge assembly does have a rotational limit stop that can be adjusted so that your water can become hotter. You will want to remove the set screw from the handle with a 1/8" allen wrench. Once the handle is removed you will be able to see the rotational limit stop on the front of the cartridge. To adjust the rotational limit stop:
1. Pull out the inner, off-white circle. It maybe quite stiff.
2. When pulled out far enough, the circle will turn. Left (counterclockwise=hotter, right (clockwise)=colder.
3.Release the circle once it's at the desired temperature.
4. Test the temperature, adjust the rotational limit stop as needed.
Best Regards,
Rosanna
Date published: 2024-03-28
what is the Pressure balance cartridge in this tub filler made of? Ceramic or plastic sleeve?
Trying to understand better what the pressure balance cartridge consists of in this faucet so I can better understand its potential reliability before I purchase it
Hi Natalie, Thank you for your question. The pressure balanced cartridge used in the model T4759-FL floor mount tub filler is our RP46074 cartridge. The cartridge has a plastic housing. The same cartridge is used in our 13/14 series tub/shower faucets and offers a lifetime warranty to the original purchaser.
Thanks,
Dave
Date published: 2024-03-28
Is there both flow and temperature control?
Does the faucet have both flow and temperature control. Can I have full flow and change from hot to cold. Can i have minimal flow with just hot water?
Hi Mkret, Thank you for your question. The model T4759-FL uses the same pressure balanced cartridge used in our 13/14 series single handle tub/shower faucets. This single function cartridge allows you to control temperature only, not the volume.
Thanks,
Dave
Date published: 2024-03-28
I want to adjust the temperature so it allows much hotter water. The link you posted on this in the question above only goes to 1 page of the spec doc and that page doesn't address this question. Can you give further help?
Hi, Dave!
Thank you for your question. The valve cartridge assembly in the Delta T4759-FL faucet does have a rotational limit stop that can be adjusted to get hotter water. To adjust the rotational limit stop, first remove the handle with a 1/8" allen wrench. Once the handle is off, the valve cartridge assembly will be visible. Please follow the next four steps:
1. Pull out the inner, off-white circle. It maybe quite stiff.
2. When pulled out far enough, the circle will turn. Left (counterclockwise=hotter, right (clockwise)=colder.
3.Release the circle once it's at the desired temperature.
4. Test the temperature, adjust the rotational limit stop as needed.
Best Regards,
Rosanna
Date published: 2024-03-28
Hello, is there matching sink faucets for this style? thank you
Thank you for your question, gmennie! Yes, model T4759-FL is part of the Trinsic collection. I have included a link to the Trinsic bathroom collection on our website.
https://www.deltafaucet.com/bathroom/collections/trinsic-bathroom-collection
Best Regards, Benjamin
Date published: 2024-03-28
Can you slow the flow rate down?
I have this model and I have a tankless water heater. During the winter I need to slow the flow rate down to get hotter water at times. The handle does not adjust flow rate, only temperature. Is there something that could be installed to decrease the flow rate to the faucet?
Hi Awe!
Thank you for your question. The cartridge in the T4759-RBFL floor mounted tub filler has a rotational limit stop that controls how hot the water can get. This may need adjusted. If this is already set to the hottest position, then you may need to contact the manufacturer of the tankless water heater to find the ideal setting to accommodate the flow rate of this model.
https://www.deltafaucet.com/video-gallery/video-page?videoId=n2_uZ7wgV1I
Best regards,
Edward
Date published: 2024-03-28
hose outlet connector size?
What is the size of the outlet where the Handshower Hose connects?
Hi, Will!
Thank you for your question. The hand shower hose connection is 1/2".
Best Regards,
Rosanna
Date published: 2017-05-19
Removing the handle to adjust the rotational limit stop
I have reviewed the manual and searched everything online. Please tell me how to remove the handle so I can get to the rotational limit stop. Instruction videos for the limit stop on the shower head shows using an allen wrench. When I look into the hole for this tub filler, it doesn't appear that it is the correct shape for an allen wrench.
Dear Tammi,
Thank you for your question. To remove the handle from your Delta Floor Mount Tub Filler T4759-FL faucet, you would need to use a 3/32" Allen wrench to remove the set screw.
https://media.deltafaucet.com/PartsDiagram/DPD-B-T4759-FL.pdf
Best regards,
Tanya
Date published: 2017-03-07
Does T4759-FL meet ASSE 1070 requirements
Hello Doug,
Thank you for your question. Yes, the Delta Trinsic Floor Mount Tub Filler T4759-FL model does meet all plumbing and water codes and regulations. Please feel free to call, email, or message us on social if there is anything else you need.
Best regards,
Tanya
Date published: 2024-03-28
What is the distance from the center of the free standing water on tub to the spout? We have purchased this, are waiting for it to arrive, but my plumber is going to rough it in.
Hello Minichsue,
Thank you for you question. The Delta Contemporary Floor Mount Tub Filler T4759-CZFL has a spout length of 8" (203 mm).
https://media.deltafaucet.com/SpecSheet/DSP-B-T4759-FL%20Rev%20E.pdf
Best regards,
Tanya
Date published: 2024-03-28
Swivel Lock
Is there a lock that would prevent the spout from swiveling?
Hi, Al!
Thank you for your question. There is not a lock on the spout that will stop the spout from swiveling.
Best Regards,
Rosanna
Date published: 2017-03-16
Only warm water comes out. How do you adjust water temp? Is there a video out there for instruction?
Thank you for your question, Vincent! This model includes a rotational limit stop that must be set to a higher temperature at the time of installation. Information on making this simple adjustment can be found on page 7 of the Maintenance and Installation manual below. Please let us know if you have questions or need further assistance.
https://media.deltafaucet.com/MandI/74820%20Rev%20G.pdf
Best regards, Edward
Date published: 2024-03-28
Does this tub filler have a scorch feature to regulate the heat of the water? This is required by code in my city.
Hi Navis,
Thank you for your question! This faucet has a pressure-balance cartridge to help prevent scalding. It also has a Rotational Limit Stop that allows you to adjust the maximum temperature. For more information regarding compliance, please see the Technical Specifications:
https://media.deltafaucet.com/SpecSheet/DSP-B-T4759-FL%20Rev%20E.pdf
Best regards, Jon
Date published: 2024-03-28
How do I mount the T4759-FL?
Does it include a mounting plate?
What type of connections (interface) do I need for the supply lines? I read the installation instructions and it doesn't specify supply to faucet connection types.
Thank you.
Hi Lori, Thank you for your question. The T4759-FL is only the trim for the faucet. You will also need to order the floor mount tub filler rough in as well. R4700-FL or R4700FLWS will work with the trim to make a complete faucet. The roughs are plumbed with 1/2" lines. I have attached the manual for the R4700-FL below.
Thanks,
Dave
http://www.deltafaucet.com/customersupport/documentation/r4700-fl.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper
Date published: 2024-03-28
If using the optional high flow cartridge is the unit still pressure balanced?
Hi Joe The Plumber NJ, Thank you for your question. The optional high flow cartridge for the floor mount tub fillers is not pressure balanced.
Thanks,
Dave
Date published: 2024-03-28
what is the differences between the 144759-FL and the T4759-FL?
Hi Brian,
Thank you for your question. The Delta Trinsic T4759-FL is a trim kit only, you would need to purchase the rough-in valve separately. The Trinsic Floor Mount Roman Tub 144759-FL faucet is a complete unit includes trim and rough-in valve.
Best regards,
Tanya
Date published: 2024-03-28
How do you increase the water flow?
Hi Anonymous,
Thank you for your question. The T4759-FL floor mount tub filler has a flow rate of 6.0 gallons per minute at 60 PSI. The hand shower is 2.0 gpm. There is no way of increasing or decreasing these flow rates.
Best regards,
Tanya
Date published: 2024-03-28
Does this faucet include scald guard?
Hi Cameron,
Thank you for your question. The T4759-FL does have scald guard and a rotational limit stop with the cartridge that limits how hot the water can get. However if you upgrade to the RP73598 cartridge that gives a higher flow rate you will not have either protection. This high flow cartridge is not recommended to be used in a shower application.
Thanks,
Dave
Date published: 2024-03-28
Which rough-in valve is suggested for installation on/in concrete slabs? Neither installation manual shows a slab type installation.
Can this valve be installed in or under the concrete slab
Date published: 2024-03-28
Información especial
ADVERTENCIA de la Proposición 65 de California
ADVERTENCIA DE LA PROPOSICIÓN 65 de California
Este producto puede exponerle al plomo, que según el estado de California causa cáncer y anomalías congénitas u otros daños reproductivos.
Para obtener más información, visite http://www.P65Warnings.ca.gov.
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.