Llave para cocina retráctil de una manija en cromado

N.º de modelo: 4153-DST
Llave para cocina retráctil de una manija en cromado
N.º de modelo: 4153-DST
Precio de lista: $40670
CARACTERÍSTICAS DEL PRODUCTO
La varilla de rociado Multi-Flow™ le permite elegir entre un rociado con consumo eficiente del agua para las tareas cotidianas o un flujo alto de agua para llenar ollas y otros recipientes grandes un 33% más rápido*. Las llaves con tecnología de sellado DIAMOND™ Seal de Delta® funcionan como si fueran nuevas de por vida porque cuentan con un diseño patentado gracias al cual se reducen los puntos de fuga, la instalación es más sencilla y duran el doble que el estándar de la industria*. Las llaves para cocina con orificios rociadores Touch-Clean® le permiten limpiar con facilidad la acumulación de calcio y cal con solo deslizar el dedo. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida. *Estándar de la industria basado en ASME A112.18.1 de 500,000 ciclos. *Aumento temporal del flujo a demanda basado en el caudal estándar de 1.5GPM a 60 psi.
  • Las varillas de rociado Multi-Flow le permiten elegir entre un rociado o un chorro con consumo eficiente del agua para tareas cotidianas, o un alto flujo de agua para llenar ollas y otros recipientes grandes con un 33 % más de rapidez
  • Los suaves orificios rociadores de goma Touch-Clean® le permiten limpiar fácilmente la acumulación de calcio y cal con solo deslizar el dedo.
  • La tecnología de sellado DIAMOND es más fácil de instalar y ayuda a su llave a funcionar como si fuera nueva toda la vida, ya que reduce los puntos de fuga y dura dos veces más que los productos estándar de la industria
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex
  • Instalación con 1 o 3 orificios de 8"
  • Incluye cubierta opcional para uso con configuraciones de montaje adicionales y aspecto integrado
  • Cumplimiento con la ADA
  • La llave extensible de arco elevado gira 360 grados
  • La manguera larga de 54 pulgadas proporciona un alcance increíble
Technology and Special Features
Cumplimiento con la ADA
Libres de plomo
Uso eficiente del agua
Documentos y especificaciones
Información de instalación
Instalación con 1 o 3 orificios de 8"
Instalación con 1 o 3 orificios de 8"
Altura total:
12 5/16
Voltaje:
0
Caudal:
1.5 gpm a 60 psi, 5.7 l/min. a 414 kPa
Tipo de válvula:
Disco cerámico

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

LISTA DE PIEZAS

LISTA DE PIEZAS

Discontinuado
Discontinuado
Image-RP52609
Discontinuado

Talbott™

Talbott™ Tornillería de montaje

Precio de lista: $21.15
Acabados estándar

RP52609

Image-RP37490

Delta®

Delta® Placa de estabilización

Precio de lista: $24.55
Precio en línea: $19.64
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP37490

3.20 5
Image-RP21945

Delta®

Delta® Dispensador de jabón/loción - Tuerca

Precio de lista: $6.95
Precio en línea: $5.56
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP21945

3.00 1
Image-Master-RP51502

Delta®

Delta® Casquillo

Precio de lista: $15.05 - $41.50
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP51502

Image-RP63263

Delta®

Delta® Kit de adaptadores - Compresión PEX (4)

Precio de lista: $37.90
Precio en línea: $30.32
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP63263

3.67 3
Discontinuado
Discontinuado
Image-RP49149
Discontinuado

Delta®

Delta® Contrapeso de manguera deslizante

Precio de lista: $34.20
Acabados estándar

RP49149

3.00 2
Image-Master-RP62773

Linden®

Linden® Wand Assembly - Pull-Out

Precio de lista: $109.20 - $171.65
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP62773

Image-Master-RP62774

Linden®

Linden® Spout Assembly

Precio de lista: $93.45 - $135.30
Acabados estándar

RP62774

Image-RP47888

Allora®

Allora® Dispensador de jabón/loción - Conjunto de cuerpo

Precio de lista: $13.85
Precio en línea: $11.08
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP47888

4.38 16
Image-RP62777

Linden®

Linden® Friction Ring

Precio de lista: $15.40
Precio en línea: $12.32
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP62777

Image-Master-RP62779

Linden®

Linden® Escutcheon, Base & Gasket

Precio de lista: $39.95 - $46.80
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP62779

Image-RP60924

Delta®

Delta® Llave - Llaves con tecnología de sellado DIAMOND™ Seal

Precio de lista: $21.60
Precio en línea: $17.28
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP60924

5.00 1
Image-RP13938

Delta®

Delta® Junta tórica

Precio de lista: $6.90
Precio en línea: $5.52
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP13938

4.50 2
Image-RP60911

Delta®

Delta® Abrazadera para manguera de conexión rápida

Precio de lista: $15.80
Precio en línea: $12.64
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP60911

2.64 11
Image-RP30395

Delta®

Delta® Dispensador de jabón/loción - Embudo con ventilación

Precio de lista: $5.90
Precio en línea: $4.72
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP30395

5.00 2
Image-Master-RP62775

Linden®

Linden® Metal Lever Handle Kit

Precio de lista: $54.40 - $78.55
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP62775

RESEÑAS
Rated 1 out of 5 by from poorly constructed kitchen faucet Poorly constructed. Original and replacement leaked. I had to incur the expense of original installation and removal and replacement with different brand.
Date published: 2024-08-12
Rated 4 out of 5 by from Pluses and minuses Nice looking. Very difficult to find the “just right spot for warm water, it’s easy for just hot or just cold”. Hose for sprayer is too long so the weight on the bottom just sits on the bottom of the cabinet defeating its purpose of locking it back to the faucet. Sprayer is chintzy plastic. If I knew all that from the before installing I would have chosen something else. Do like the lower profile
Date published: 2024-04-21
Rated 3 out of 5 by from Nice faucet but Flow Switch is Cheap About a year after we bought it the flow switch stopped working, It Wouldn't switch back from spray to flow, so the only way to go back to flow is to turn it off and on. Now, about three years in, the flow switch is leaking water wildly, so it gets everything wet around the sink. Seemed well made when we bought it and maybe three years is the life of a faucet, but we had our former faucet for more than 10. Disappointing.
Date published: 2023-12-03
Rated 5 out of 5 by from Sleek Kitchen Faucet Beautiful faucet - clean and simple. Pull out faucet works smoothly. Very happy with purchase.
Date published: 2023-11-08
Rated 4 out of 5 by from Nice faucet, but awkward to turn off Nice faucet, but it takes some getting used to. With the handle on the right side, we thought it would work out well for the two of us who are right handed. Not so much. You have to operate it with your right hand while holding the glass, coffee pot, whatever, in the left hand. Feels awkward. Our biggest problem with it is that if you don't get the handle in exactly the right spot, you haven't turned it off and the faucet is still running. Sounds ridiculous, but we have left the water running numerous times in the past week. If we had it to do over, we would have had the plumber install it with the handle on the left. That would probably have worked better for us.
Date published: 2023-09-04
Rated 5 out of 5 by from Great faucet This faucet is everything I hoped. The stainless finish is perfect and the size and reach of the faucet is perfect for my sink.
Date published: 2023-07-23
Rated 5 out of 5 by from Great faucet I love this faucet. The spray is just right and the power boost feature for regular flow is excellent for filling pans and washing up dishes. Plus the color is a deep bronze with flecks of copper that match my copper cookware.
Date published: 2023-03-26
Rated 2 out of 5 by from Meh faucet - cheap feel and look up close Looked and felt very cheap to me even though it cost several hundred dollars. I liked the design of this one, but I returned it because the spout handle was so cheap feeling and looking and it was totally plastic. I did buy another Delta faucet I like much better
Date published: 2022-05-07
  • y_2024, m_11, d_5, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_58
  • loc_en_US, sid_4153-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 4ms
  • reviews, product
Preguntas y respuestas

Does this have the magnet that locks the sprayer in place like some of your other models?

Asked by: EddieR
Hello EddieR, Thank you for your inquiry! The Delta Linden Kitchen 4153-DST faucet does not have the MagnaTite docking feature for the wand/sprayer assembly. https://media.deltafaucet.com/PartsDiagram/DPD-K-4153-DST.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

We have difficulty getting the pull out sprayer to retract all the way into the handle. We frequently have to push it to get it to go in fully.

What can we do to make this easier?
Asked by: Sherry
Hi Sherry, Thank you for your question. The weight on the hose helps placing the wand back into place but does not retract the hose. It is normal to have to place the wand back into the spout to finish the connection. Please verify that the wand assembly hose is not getting hung up on other items below the sink. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Are your products nickel-free?

Asked by: Daisy
Thank you for your question, Daisy! Our "Brilliance" PVD finishes as well as Chrome finishes include a layer of nickel as part of the finishing process, however these finishes all have other durable protective layers covering the nickel. DST products have no metal exposure to water, therefore there is no nickel exposure with the internal components. Non-DST product do have some metal exposed in the waterway, and there could be some components of non-DST products that contain nickel. If you have a Nickel Allergy we recommend a Brilliance PVD finish as well as a DST model. For more information on this type of finish, please click on the link below. https://www.deltafaucet.com/design-innovation/innovations/kitchen/brilliance-finishes Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

How far does the control lever rotate forward and back to control temperature? The rear limit is shown in the drawing on the specification sheet, but I would like to also know how far forward it goes. Please specify in angular degrees.

Asked by: John S
That seems like it would prevent fine control of temperature.
Answered by: John S
Date published: 2024-03-28

The sprayer assembly does not easily fit back into the spout assembly. It is not the hose retraction that is an issue.

We always have to manually push the sprayer assembly back and sometimes it does not go in all the way.
Asked by: Sherry
Hi Sherry, Thank you for your question. The wand is sealed tightly when pushed into the spout and there is some resistance. Try putting a small amount of vegetable oil on the 2 exposed o-rings on the black portion of the wand to slide in more easily. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

How do I remove faucet filter to removed mineral buildup?  (Model 4153-DST)

Asked by: Mrs C
Hello Mrs C, Thank you for your question. The Delta Linden Kitchen 4153-DST faucet does not come with a removable aerator assembly. We do not recommend disassembling the sprayer assembly. To dissolve any sediment that may collect in the aerator or spray face, just soak the face of the spray assembly in a 50/50 or stronger mixture of white vinegar and tap water for 10 to 15 minutes. The large particles of debris are caught in the bottom end of the spray assembly, where it connects to the hose. Just unscrew the spray assembly from the hose assembly and flush the debris out with water from the hose. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Does the Linden pull-out kitchen faucet (high arc) swivel?

I noticed that the details about some of your other faucets included "swivels 360 degrees." Does this one as well?
Asked by: Jen
Thank you for your question. Delta Faucet model # 4153-DST does swing 360 degrees.
Answered by: Delta1
Date published: 2024-03-28

My current water faucet( not Delta) has a “weak” flow. For example, when water comes out of the faucet the flow is 3/8 in diameter and no bubbles. Does this Delta have a restricted flow as well?

Asked by: Asb0215
Hello Asb0215! Thank you for your question regarding the Delta Faucet LINDEN™ Linden™ Single Handle Pull-Out Kitchen Faucet In Chrome MODEL#: 4153-DST! I do apologize that this information wasn't readily available but I am happy to help. The Delta 4153-DST has a max flow rate of 1.5 GPM @ 60 PSI (5.7 L/min @ 414 kPa) in spray and standard aerated mode! Please reach out to us directly if you need further assistance. Thank you for being a loyal Delta Faucet customer. Best Regards, Antoine
Answered by: Delta Faucet
Date published: 2022-09-20

Is there a ball joint or other pivot where the sprayer hose connects to the sprayer head?

Asked by: John S
Thank you for your question, John S! The hose assembly is just screwed into the back/top of the wand/sprayer assembly, there is no ball joint connection of the Delta Linden Kitchen Pull-Out 4153-DST faucet model. https://media.deltafaucet.com/PartsDiagram/DPD-K-4153-DST.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

I have a new Delta 4153 DST kitchen faucet. We have well water, and the flow rate is low. I would like to remove the flow restrictor on this faucet, but I do not see one listed on the parts list. Where is it?

Asked by: Gino
Thank you for your question, Gino. There is a flow restrictor located inside the wand assembly. However, we do not recommend to remove or modify the restrictor as this will void the warranty and may prevent it from complying with plumbing codes in your area. Please refer to the Technical Specifications to find the flow rate at 60 PSI. If you are not getting good flow, please check for debris in the back of the wand assembly as this is the most common cause of a reduced flow rate besides low water pressure. https://media.deltafaucet.com/SpecSheet/dsp-k-4153-dst_C.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

linden 4153-dst: what are the dimensions of the escutcheon?

Asked by: Ellen
Thank you for your question, Ellen! The escutcheon plate on model 4153-DST, has a length of 10 1/2" inches and the holes have an 8" inch center to center spread. Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

Can the handle of this facet be installed on the left hand side instead of the right?

Asked by: Anonymous
Hi, Donnaflowers! Thank you for your question. We recommend installing this faucet with the handle on the right. You may install the faucet with the handle on the left side, but the temperature adjustment will be opposite of the standard operation for single handle faucets. You could compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button on the handle will no longer indicate the correct temperature. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Is the Arctic Stainless a brushed nickel finish?

Asked by: Lovey33002
Thank you for your question, Lovey33002! The Delta Arctic Stainless Steel is a cooler-toned version of our Stainless Steel which is often compared to our Brushed Nickel finish. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

2 Questions on Operation

1. Which way do you move the side-mounted lever handle to turn the water ON - Up or Down? 2. Does the pull down “sprayer assembly” have a water shut-off button? That is, can you shut the water flow completely OFF from the sprayer assembly?
Asked by: GrumpyGeezer
Thank you for your question. Delta Faucet model # 4153-SS-DST is turned on by pulling the handle to the side. The water is made hotter by pushing the handle to the back and made colder by pulling it to the front. The only way to completely shut off the water is to use the handle on the side. The spray wand will switch from spray to stream but not turn the water off completely.
Answered by: Delta1
Date published: 2024-03-28

can this faucet be installed without the deckplate?

Asked by: syl
Thank you for your question. Delta Faucet model # 4153-RB-DST can be installed with or without the deckplate.
Answered by: Delta1
Date published: 2024-03-28

Sprayer Clogged

My 4153-RB-DST has a partially clogged sprayer which causes the sprayer to spray water in various directions, especially toward the user! How do I clean it out?
Asked by: wyealbert
Hi wyealbert, Thank you for your question. The wand on your model 4153-RB-DST is equipped with our touch clean system on the spray pattern holes. Simply wipe you finger across the rubber nubbins to clean. To clean the entire wand we recommend soaking the wand in a 50/50 solution of vinegar and water to help break up any mineral build up. Make sure to rinse the wand when finished. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Can you toggle between spray and stream, or do you have to hold the button down for spray?

Asked by: Sandy
Thanks for your question, Sandy! The stream and spray setting are controlled by a toggle switch, so you won't need to hold it down. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-07-27

Can this faucet be used with one of the 3" escutcheons?

We are trying to cover up a faucet hole that was drilled about 1/2" too big. We would rather not use the large three hole escutcheon, so we were wondering if any of the smaller escutcheons would fit with this faucet. If so, which model number would fit?
Asked by: tmg
Thank you for your question. Delta Faucet model # 4153-DST can either be mounted as a 1-hole or a 3-hole installation. The single hole installation has an escutcheon that is 2 3/4 inches wide and the three hole installation has a 10 inch escutcheon plate. These are the only two escutcheon plates that will work with this faucet.
Answered by: Delta1
Date published: 2024-03-28

Delta 4153-AR-DST kitchen faucet

I need to replace set screw. I can’t figure how to get the handle in the correct position. Can you help me?
Asked by: Linda67
Thank you for your question, Linda. We would be happy to help. First, slide the handle onto the stem of the cartridge and ensure that the set screw hole is facing the faucet. The set screw should meet the flat part of the stem. Next, move the handle to the on position to provide more room, then tighten the set screw with a 1/8" Allen wrench. Please refer to the Installation Instructions for a diagram. https://media.deltafaucet.com/MandI/80328%20Rev%20B.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

It's difficult to completely shut off the faucet (home is 2-1/2 years old). Seems like a new washer is needed but, we disassembled it and don't see a washer to replace. Should we purchase a replacement valve assembly?

Asked by: Linda
Hi, Linda! Thank you for your question, and I am sorry to hear that you are experiencing a leak from your Delta faucet. We recommend to clean the bottom puck on the valve cartridge assembly and retighten the bonnet nut to stop the leak. To do this, turn the water off at your shut off valve. Remove the handle. Unscrew the bonnet nut. Pull the valve cartridge out and clean the bottom puck on the valve cartridge assembly. Reinstall the valve cartridge assembly and retighten the bonnet by turning clockwise, to the right. Install the handle back on and turn the water back on. Test the faucet. If the faucet still leaks, we recommend to replace both the valve cartridge assembly, RP50587, and the bonnet nut, RP51503. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

IS THERE ANY DIFFERENCE BETWEEN THE LINDEN SINGLE HANDLE PULL OUT KITCHEN FAUCET 4153SSDST, SOLD AT MERNARDS VS PLUMBING WHOLESALER?

IF SO, WHAT ARE THEY?
Asked by: RAY
Thank you for your question. Delta Faucet model 4153-SS-DST is the exact same faucet, inside and out, no matter where it is sold.
Answered by: Delta1
Date published: 2024-03-28

Is the Linden 4153-SSSD-DST and 4153-SS-DST the same faucet other than the soap dispenser? Is the pull down sprayer magnetic?

Asked by: Roberta
Thank you for your question. Delta Faucet models 4153-SSSD-DST and 4153-SS-DST only have a difference of a soap dispenser in the 4153-SSSD-DST. The pull-down sprayer is not magnetic.
Answered by: Delta1
Date published: 2024-03-28

What is height of faucet from countertop. 

Asked by: Deb H
Hi Deb H, Thank you for your question. The total height of the faucet is 12 5/16". Below is a link to the technical specification sheet: https://media.deltafaucet.com/SpecSheet/DSP-K-4153-DST%20Rev%20C.pdf Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

My Delta 4153-DST started leaking. I have to give the handle a HARD jerk to the right to stop drips or slow flows. This began 2 weeks ago. I notice the entire base is lose. Tried to tighten this from underneath, but could not see how to do this. Help

Asked by: bacy
Hi bacy, thank you for contacting Delta Faucet Company! We apologize for the leaking you are experiencing! This model uses RP50587 cartridge assembly. The wrench that tightens the faucet opening measures .948". It is included with the faucet and is made to unthread the 15/16" / .9375 nut, part number RP40526. We appreciate your inquiry. Please reach out directly if you have any questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

We have 3 inches between our backsplash and our sink, and the hole is obviously in the middle (approx 1.5 inches from backsplash). The specs for this faucet say we need a minimum of 2.5 inches, but I assume that is from the center of the hole. Correct?

Asked by: Jim55
Hello Valued Customer, Thanks so much for contacting Delta Faucet Company! We do recommended a minimum of 2 1/2" (64 mm) clearance to the back splash from the center of the hole when installing the LINDEN® Pull-Out Kitchen Faucet MODEL#: 4153-DST. Please refer to the technical specifications sheet for more details. I have attached the link below. https://media.deltafaucet.com/SpecSheet/DSP-K-4153-DST%20Rev%20D.pdf Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-22

4153-DST pullout faucet: What is the maximum height from the deck to the top of the on-off handle? Bottom of window ledge above sink is about 7.5 inches above the countertop and need to know if the handle would fit under the ledge. Thanks.

Asked by: Monty
Hello Monty, Thank you for your question, I would be happy to help you. The measurement your asking for is approx. 8 1/2"-9", from the deck to the top of the handle. Please contact us back for any further questions or concerns. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Can the Delta 4153-DST faucet be installed with the on / off lever on the left side instead of the right side? Thanks

Asked by: RDH1970
Hi RDH1970! Thank you for your question and we are happy to help. The Delta 4153-DST can be installed this way but the functions will be backwards. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-02-27

How to remove the handle. Can't get to the set screw. It's making a squeaking noise when turning off and on. HELP Cover of what I believe is the screw won't come off. Delta Model - Linden 4153 DST Chrome

Asked by: Bones
Hi Bones, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-05

Can this faucet be used with RO system?

Asked by: Ruth
Hello Ruth! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. We recommend installing the Delta Faucet Linden™ Single Handle Pull-Out Kitchen Faucet In Chrome MODEL#: 4153-DST into your regular water supply. We, unfortunately, do not have reverse osmosis choices. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

What years was this faucet made? Our house was built in 2013 and we had this installed but I want to put a new cartridge in it as it is noticeably more 'touchy' to get the water completely shut off. For that year what would the part numbers be?

Asked by: Boomer
Hello Boomer, Thank you for your question. We are happy to help! The Delta 4153-DST faucet model is available from 2010 to the present. For the issue you describe, we recommend flushing the faucet and replacing the RP50587 cartridge if the issue remains. Be sure to securely tighten the bonnet nut with a wrench. https://www.deltafaucet.com/parts/product/RP50587.html To flush the unit, turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge, and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2024, m_11, d_5, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_53
  • loc_en_US, sid_4153-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 37ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.