Llave para cocina extensible de una manija en cromado

N.º de modelo: 9113-DST
Llave para cocina extensible de una manija en cromado
N.º de modelo: 9113-DST
Precio de lista: $40670
CARACTERÍSTICAS DEL PRODUCTO
El acoplamiento MagnaTite® de Delta® cuenta con un potente imán integrado que permite colocar la varilla de rociado de la llave en su lugar y la sostiene allí para que permanezca acoplada cuando no está en uso. Las llaves con tecnología de sellado DIAMOND™ Seal de Delta® funcionan como si fueran nuevas de por vida porque cuentan con un diseño patentado gracias al cual se reducen los puntos de fuga, la instalación es más sencilla y duran el doble que el estándar de la industria*. Las llaves para cocina con orificios rociadores Touch-Clean® le permiten limpiar con facilidad la acumulación de calcio y cal con solo deslizar el dedo. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida. *Estándar de la industria basado en ASME A112.18.1 de 500,000 ciclos.
  • El acoplamiento MagnaTite® utiliza un potente imán integrado para colocar la varilla rociadora de la llave de manera precisa en su lugar y mantenerla allí para que permanezca acoplada cuando no está en uso, y no se cae con el tiempo
  • Los suaves orificios rociadores de goma Touch-Clean® le permiten limpiar fácilmente la acumulación de calcio y cal con solo deslizar el dedo.
  • La tecnología de sellado DIAMOND es más fácil de instalar y ayuda a su llave a funcionar como si fuera nueva toda la vida, ya que reduce los puntos de fuga y dura dos veces más que los productos estándar de la industria
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex
  • Instalación con 1 o 3 orificios de 8"
  • Cumplimiento con la ADA
  • El diseño de cuello de ganso con arco elevado gira 360 grados con una manguera retráctil de 20" para una comodidad superior durante las tareas cotidianas de la cocina.
Technology and Special Features
Cumplimiento con la ADA
Libres de plomo
Uso eficiente del agua
Documentos y especificaciones
Información de instalación
Instalación con 1 o 3 orificios de 8"
Instalación con 1 o 3 orificios de 8"
Overall Height (in.) :
15 1/4
Caudal:
1.8 gpm a 60 psi, 6.8 l/min. a 414 kPa
Tipo de válvula:
Válvula DIAMOND(TM) Euromotion

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

LISTA DE PIEZAS

LISTA DE PIEZAS

Image-RP37490

Delta®

Delta® Placa de estabilización

Precio de lista: $25.80
Precio en línea: $20.64
Free Ground Shipping All Orders $49+
Acabados estándar

RP37490

3.20 5
Image-Master-RP80520CZ

Essa®

Essa® Spout Assembly

Precio de lista: $101.20 - $147.30
Free Ground Shipping All Orders $49+
Acabados estándar

RP80520CZ

Image-Master-RP80525CZ

Essa®

Essa® Handle

Precio de lista: $54.35 - $86.45
Free Ground Shipping All Orders $49+
Acabados estándar

RP80525CZ

Image-RP63265

Delta®

Delta® Adaptador - Junta deslizable

Precio de lista: $51.40
Precio en línea: $41.12
Free Ground Shipping All Orders $49+
Acabados estándar

RP63265

Image-RP80619

DELTA

DELTA Tuerca de bonete

Precio de lista: $20.65
Precio en línea: $16.52
Free Ground Shipping All Orders $49+
Acabados estándar

RP80619

Image-RP63264

Delta®

Delta® Kit de adaptadores - Compresión PEX (10)

Precio de lista: $81.50
Precio en línea: $65.20
Free Ground Shipping All Orders $49+
Acabados estándar

RP63264

Image-Master-RP80524CZ

Essa®

Essa® Sprayer

Precio de lista: $72.35 - $101.20
Free Ground Shipping All Orders $49+
Acabados estándar

RP80524CZ

Image-RP63263

Delta®

Delta® Kit de adaptadores - Compresión PEX (4)

Precio de lista: $39.80
Precio en línea: $31.84
Free Ground Shipping All Orders $49+
Acabados estándar

RP63263

3.67 3
Image-RP80977

Delta®

Delta® Kit de imanes de recambio

Precio de lista: $61.30
Precio en línea: $49.04
Free Ground Shipping All Orders $49+
Acabados estándar

RP80977

3.35 34
Image-RP60923

Delta®

Delta® Espaciadores de rozamiento y abrazadera - Cocina

Precio de lista: $21.40
Precio en línea: $17.12
Free Ground Shipping All Orders $49+
Acabados estándar

RP60923

5.00 2
Image-RP60924

Delta®

Delta® Llave - Llaves con tecnología de sellado DIAMOND™ Seal

Precio de lista: $22.70
Precio en línea: $18.16
Free Ground Shipping All Orders $49+
Acabados estándar

RP60924

5.00 1
Image-RP80522

Delta®

Delta® Conjunto de manguera

Precio de lista: $79.85
Precio en línea: $63.88
Free Ground Shipping All Orders $49+
Acabados estándar

RP80522

5.00 1
Image-Master-RP54972

Delta®

Delta® Casquillo - 1H (baño)

Precio de lista: $12.75 - $31.05
Free Ground Shipping All Orders $49+
Acabados Lumicoat
Acabados estándar

RP54972

Image-RP54975

Lahara®

Lahara® Junta tórica

Precio de lista: $14.10
Precio en línea: $11.28
Free Ground Shipping All Orders $49+
Acabados estándar

RP54975

Discontinuado
Discontinuado
Image-RP51685
Discontinuado

Allora®

Allora® Mounting Bracket & Nut

Precio de lista: $19.45
Acabados estándar

RP51685

Image-RP92714

DELTA

DELTA Tornillería de montaje

Precio de lista: $40.40
Precio en línea: $32.32
Free Ground Shipping All Orders $49+
Acabados estándar

RP92714

4.33 3
RESEÑAS
Rated 5 out of 5 by from Awesome Faucet The faucet is nice and heavy and is designed to make it a simple installation. Took me about 2 hours to install the faucet which included removing the old faucet and plate. The water flow is excellent, feels super sturdy when installed and the stainless finish is beautiful. The pull down works well and the magnetic head to faucet connection works really well. You can't go wrong with Delta!
Date published: 2025-03-30
Rated 5 out of 5 by from Perfect Great product in all ways from height to spray to swivel to locking mechanism!
Date published: 2025-03-16
Rated 5 out of 5 by from Excellent choice Solid, well made. Definitely better quality than the predecessor purchased from a big box store. Love the elegant simplicity.
Date published: 2025-03-08
Rated 5 out of 5 by from Perfect Looks great - easy install - contractor happy it was a “normal” brand
Date published: 2025-03-07
Rated 5 out of 5 by from Great Faucet, Great Value purchased for a client project. very happy with the product
Date published: 2025-02-23
Rated 5 out of 5 by from Looks great A very nice kitchen faucet
Date published: 2025-02-10
Rated 5 out of 5 by from Some things you just don't skimp out on Quality is very important for my projects, but so critical with products that will be constantly in use. Buy quality and do it once, do it right
Date published: 2025-01-24
Rated 5 out of 5 by from looks great, works great - I like the fact that the spray stays on after the faucet is turned off, rather than reverting back to the full flow mode. solid product that looks good
Date published: 2025-01-16
  • y_2025, m_4, d_3, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_531
  • loc_en_US, sid_9113-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 4ms
  • reviews, product
Preguntas y respuestas

How long is the pull-out hose?

Asked by: PebbleStone
Hi PebbleStone, Thank you for your question. The length of the pull-out hose is 54". Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2024-03-28

Is there any way to increase the flow rate? Perhaps a head with a less restrictive head.

Asked by: Greg51
Hi, Greg51! Thank you for your question. The Delta 9113-DST Faucet has a flow rate of 1.80 gpm @ 60 psi. The unit is WaterSense® Labeled. WaterSense® labeled faucets use at least 20% less water than the industry standard—saving you money without compromising performance. At this time, we do not have a different sprayer that increases the flow rate for the faucet. If you feel that you are getting less than 1.80 gpm, we would be more than happy to help you with this. Please feel free to call, email, or message us on social. Best regards, Rosanna Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

Hi. I'm trying to remove the aerator. Do you know which aerator wrench can fit in this model?

Asked by: Booboo
Hi, Doti! Thank you for your question. The Delta 9113-DST faucet sprayer assembly was designed with a non-removable aerator. We recommend to remove the whole sprayer, RP80524AR, to clean or replace the aerator. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How do I change the screen for clogs

Asked by: Lisa
Hi, Lisa! Thank you for your question. The aerator assembly for the Delta 9113-DST is non-removable. To clean, we do recommend to remove the sprayer assembly from the hose assembly. Soak the sprayer in a solution of 50% white vinegar and 50% water mix for an hour or even overnight to clean the debris. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

what kind of wrench do I need to remove the handle?

Asked by: Rob
Hello Rob, Thank you for your inquiry! You will need a 1/8" allen wrench to remove the set screw in the handle of the Delta Essa Kitchen Pull-Down 9113-DST faucet. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Can this faucet be installed on a laminate counter top - or does it need to be installed on a solid surface such as granite or quartz?

Asked by: Mary
Dear Mary, Thank you for your question. The Delta Essa Kitchen faucet can be installed on any standard sink or countertop material with a maximum deck thickness of 2 1/2". Best regards, Tanya
Answered by: Tanya
Date published: 2016-10-17

Is there a similar faucet that will fit in a 2” countertop hole?

Asked by: Stridertjs
Tanya, I meant a 2” diameter hole.  This faucet requires a hole size of 1.25 to 1.5 inches, but the hole in my granite countertop is 2 inches. 
Answered by: Stridertjs
Date published: 2024-03-28

Is there an optional aerator for 1.0 gpm

Asked by: Samuel
Thank you for your question, Samuel! Model 9113-DST does not have a removable or replaceable aerator option. The flow rate can be reduced; however, by simply turning down the shut-off supplies slightly below the counter. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Can Essa faucet be offset with d shape sink?  And is the exact product wherever it’s purchased from?

Asked by: Sharjane
H, Sharjane! We appreciate your interest in Delta faucets. All Delta faucets feature the same quality parts, materials, and workmanship, no matter what kind of dealer sells them. Here is a link to the technical specifications sheet to make sure this works for your sink set up: https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST_A.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How long should batteries last

Asked by: BobF
Hi, BobF! Thank you for your question. For the Delta 9113T-DST Faucet and all of our Touch2O Faucets, use 6 AA (included) with a battery life of approximately 1 year or 6 C (not included) with a battery life of approximately 3 years. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can the handle be on either side of the faucet ? Essa Single-Handle Pull-Down Sprayer Kitchen Faucet with MagnaTite Docking in Arctic Stainless

Asked by: Kirkline
Hi, Kirkline! Thank you for your question. We recommend installing this faucet with the handle on the right. You may install it with the handle on the front or left side, but the temperature adjustment will be opposite of the standard operation for single handle faucets. You could compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button on the handle will no longer indicate the correct temperature. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can the faucet be installed with the handle facing forward

Can the faucet be installed with the handle facing forward and not to either the right of left?
Asked by: Marty
Hi Marty, Thank you for your question! The faucet is designed to have the handle installed on the right. It could be installed with the handle on the front, but it will only rotate to the left from the 12 o'clock position. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Soap Dispenser

Is there a particular soap dispenser model that goes with the 9113 faucet model?
Asked by: griega99
Hello Griega99, Thank you for your question! The RP1001 is the soap dispenser listed on the parts diagram of this faucet. However, we encourage our customers to get what they think looks best in their home. Here is a link to all available Delta soap dispensers: http://www.deltafaucet.com/kitchen/accessories/filter-results.html?sort=pricehighlow&type=type-kitacc-soapdispenser&function=kitchen-accessories I hope this helps!
Answered by: DeltaFaucet9
Date published: 2024-03-28

Can this faucet be mounted on a stainless steel sink or must it be deck mounted?

Asked by: Cappy
Hi Cappy, Thank you for your question. The Delta Essa Kitchen 9113-DST faucet can be installed on any standard sink or countertop material with a maximum deck thickness of 2 1/2". However, we do recommend to use the RP37490 Stabilization Plate if installing on a thin gauge metal sink, to help prevent it from flexing. This plate goes under the sink and can be installed as is or cut to fit. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Does the Essa kitchen faucet have the new Shieldspray feature?

Asked by: Kan12
Hi, Kan12! Thank you for your question. The 9113-DST does not have the new ShieldSpray Technology. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Installing Delta faucet 9113-DST. There's a round plastic part in box (gasket?) that instructions/parts list doesn't mention. What is this? Also, does it matter which direction I orient the mounting plate or can it go either way?

Asked by: Lisa
Hi, Lisa. Thank you for your question. The round plastic part is a gasket that Delta 9113-DST Faucet. This gasket goes inside of the base of your faucet. The round hole should go around the mounting shank, and the hoses should go through the other hole. The mounting hardware should only be able to be oriented one direction. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

I think my Essa faucet has the hot and cold reversed. If the faucet is pulled all the way forward - toward the blue, but with the red showing - should that be hot or cold? If pushed all the way back, to red, but with blue showing, should that be cold?

Asked by: Lisabeth
Hi, Lisabeth! Thank you for your question. The Delta 9113-DST Faucet handle does rotate out, and away from the faucet body, for on and cold water. Rotate the handle forwards, towards the user, for hot water. If the supply lines are reversed, this will be opposite. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Hi, is the stabilization plate #RP37490 included with the Delta Essa faucet 9113DST or does it need to be purchased separately. Please let me know, thanks.

Asked by: Kenneth
Thank you for your question, Kenneth! The Delta Stabilization Plate RP37490 is an optional part that is not usually needed. For thin deck installations, its available for purchase separately from many of our retailers/dealers both locally and online. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

stainless steel sink installation

To install this on a stainless steel sink (a very thin deck) using the escutcheon, do I need the RP37490 thin deck aid or can it be installed without it?
Asked by: Art
Hi Art, Thank you for your question. If the faucet is installed on thin gauge stainless steel sink only (no counter top) we do recommend to use the RP37490 thin deck aid on either a one hole or three hole installation. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-01-19

Can you give me the SKU for this product?

Asked by: notaplumber
Hi notaplumber, Thank you for your question. The UPC code for this product is 0034449787031. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-05-31

Does the handle move back for hot water and down for cold water? Where is the off position?

Asked by: Cher
Hi, Cher! Thank you for your question. Pulling the Delta 9113-DST Faucet handle out and away from the faucet is the cold position. Pulling the handle forward is the hot position. Closing the handle back to the top, closest to the body of the faucet is the off position. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

On what date will you have the same model available for purchase with "LS" (140 degree swing) instead of the 360 degree swing? You are currently making it available for other similar models

Asked by: TJ homeowner
Thank you for your question, TJ homeowner! The LS (Limited 140 Degree Swivel) feature is currently only being offered in the Trinsic Collection. There are no plans to offer this feature on the Essa collection with at this time. https://www.deltafaucet.com/search-results?searchTerm=LS&searchType=Delta_Default#resultPage=1&offset=0 Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

why is the ESSA 9113-DST faucet on your site $100 more than the same model # listed @ LOWES and Home depot? Are they not the same in some way??

Asked by: AtoninPa
Thank you for your question, AtoninPa! The price found on the Delta website is the list price. We allow our dealers to set their prices accordingly. All Delta products with the same model number will be the exact same product in both appearance and material, no matter where they are purchased. Please feel free to contact us directly if you have any questions or need further assistance with this model. Best regards, Edward Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com| Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

Is the spray wand made of metal?

Asked by: Stan
Hello, Thank you for your question. The wand heads of the model 9113-DST are made of plastic. Please contact us back if you have any questions or if you need further assistance you may call us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your cooperation. Best regards, Bethany
Answered by: DeltaFaucet7
Date published: 2024-03-28

how do i know if i need to replace the batteries

Asked by: George
Hi, George! Thank you for your question. The Delta 9113T-DST Touch2O Electronic faucet has an LED indicator at the base of the faucet that blinks red when batteries are needing to be replaced. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

what size hole do we need in the counter to mount this fachet

Asked by: Diane
Hi, Diane! Thank you for your question. The Delta 9113-DST faucet requires a hole size of 1 1/4" to 1 1/2" (32 mm to 38 mm). Here is a link to the technical specifications sheet for further measurements for this faucet: https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST_A.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Where can I find the name or model number on my kitchen faucet?

Asked by: Tony
Hi, Tony! Thank you for your question. There is usually a small tag hanging off of either the hot or cold supply line with the model number. The Delta name is usually etched on the bottom part of the hub/body of the faucet. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

does this come in spot shield stainless finish?

Asked by: John
Thank you for your question, John! The Essa model 9113-DST is not currently offered in the SpotShield Stainless finish; however, we are always looking to expand our collection and finish options and appreciate your feedback. Please visit the link below for a complete list of our models offered in the SpotShield Stainless finish. https://www.deltafaucet.com/kitchen/sink-faucets/single-handle?facetFinish=spotshieldstainless Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

particle screens

Where are the screens and how are they accessed
Asked by: dan
Hi, dan! Thank you for your question. This faucet is designed with a sprayer that does not have a removable aerator/screen. If you're needing to clean the sprayer head, you can remove the sprayer head entirely from the hose and soak the whole sprayer head in a solution of 50 percent white vinegar and 50 percent water mix. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2018-02-17

Is the wrench shown in the installation instructions included or does it need to be ordered separately?

Asked by: OB
Hi OB! Thank you for your question. The wrench is included with this faucet. Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2016-09-02
  • y_2025, m_4, d_3, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_336
  • loc_en_US, sid_9113-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 42ms
  • questions, product

BUNDLES FEATURING THIS PRODUCT

Solo en minoristas en línea
Image-Master-FVS9113-SD-DST
Solo en minoristas en línea

Essa®

Essa® Kitchen Faucet with Soap Bundles

Precio de lista: $479.40
Acabados estándar

FVS9113-SD-DST

* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.