Llave para cocina extensible de una manija con tecnología ShieldSpray® en Venetian Bronze

N.º de modelo: 9178-RB-DST
Llave para cocina extensible de una manija con tecnología ShieldSpray® en Venetian Bronze
N.º de modelo: 9178-RB-DST
Precio de lista: $69500
CARACTERÍSTICAS DEL PRODUCTO
El acoplamiento MagnaTite® de Delta® cuenta con un potente imán integrado que permite colocar la varilla de rociado de la llave en su lugar y la sostiene allí para que permanezca acoplada cuando no está en uso. La tecnología ShieldSpray® de Delta® limpia con precisión láser y, a su vez, evita el desorden y las salpicaduras. Un chorro concentrado quita con potencia los restos difíciles de comida y, a la vez, un innovador escudo de agua contiene las salpicaduras y elimina el desorden. De esta manera, usted pasará menos tiempo remojando, fregando y cambiándose de camisa. Las llaves con tecnología de sellado DIAMOND™ Seal de Delta® funcionan como si fueran nuevas de por vida porque cuentan con un diseño patentado gracias al cual se reducen los puntos de fuga, la instalación es más sencilla y duran el doble que el estándar de la industria*. Las llaves para cocina con orificios rociadores Touch-Clean® le permiten limpiar con facilidad la acumulación de calcio y cal con solo deslizar el dedo. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida. *Estándar de la industria basado en ASME A112.18.1 de 500,000 ciclos.
  • El acoplamiento MagnaTite® utiliza un potente imán integrado para colocar la varilla rociadora de la llave de manera precisa en su lugar y mantenerla allí para que permanezca acoplada cuando no está en uso, y no se cae con el tiempo
  • La tecnología ShieldSpray® soluciona el problema sin provocar problemas
  • El chorro concentrado evita el desorden y el escudo de agua innovador reduce las salpicaduras
  • Los suaves orificios rociadores de goma Touch-Clean® le permiten limpiar fácilmente la acumulación de calcio y cal con solo deslizar el dedo
  • Gracias a la tecnología de sellado DIAMOND™ Seal, la instalación es más fácil y la llave funciona como si fuera nueva de por vida, ya que se reducen los puntos de fuga y la duración es dos veces superior en comparación con los productos estándar de la industria.
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex®
  • Instalación con 1 o 3 orificios de 8"
  • Incluye cubierta opcional para uso con configuraciones de montaje adicionales y aspecto integrado
  • Cumplimiento con la ADA
  • El diseño de cuello de ganso con arco elevado gira 360 grados con una manguera retráctil de 20" para una comodidad superior durante las tareas cotidianas de la cocina.
Technology and Special Features
Documentos y especificaciones
Información de instalación
Instalación con 1 o 3 orificios de 8"
Instalación con 1 o 3 orificios de 8"
Overall Height (in.) :
14 27/32
Caudal:
1.8 gpm a 60 psi, 6.8 l/min. a 414 kPa
Tipo de válvula:
Válvula de sellado DIAMOND™

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

LISTA DE PIEZAS

LISTA DE PIEZAS

Image-RP40650

Michael Graves™

Michael Graves™ Tornillo de fijación

Precio de lista: $6.60
Precio en línea: $5.04
Free Ground Shipping All Orders $49+

RP40650

5.00 3
Image-RP37490

Delta®

Delta® Placa de estabilización

Precio de lista: $27.10
Precio en línea: $20.64
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-Master-RP50813

Delta®

Delta® Dispensador de jabón/loción

Precio de lista: $56.30 - $87.45
Free Ground Shipping All Orders $49+

RP50813

Image-Master-RP63195

Leland®

Leland® Kit de manija tipo palanca de metal

Precio de lista: $67.35 - $106.20
Free Ground Shipping All Orders $49+

RP63195

Image-RP63263

Delta®

Delta® Kit de adaptadores - Compresión PEX (4)

Precio de lista: $41.80
Precio en línea: $31.84
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-RP50815

Victorian®

Victorian® Aireador y llave, retráctil o extensible

Precio de lista: $28.65
Precio en línea: $21.84
Free Ground Shipping All Orders $49+

RP50815

4.54 26
Image-Master-RP51502

Delta®

Delta® Casquillo

Precio de lista: $16.65 - $45.80
Free Ground Shipping All Orders $49+

RP51502

Image-RP21945

Delta®

Delta® Dispensador de jabón/loción - Tuerca

Precio de lista: $7.65
Precio en línea: $5.84
Free Ground Shipping All Orders $49+

RP21945

3.00 1
Image-Master-RP47274

Delta®

Delta® Cubierta - 10"

Precio de lista: $50.95 - $182.00
Free Ground Shipping All Orders $49+

RP47274

Image-RP80977

Delta®

Delta® Kit de imanes de recambio

Precio de lista: $64.35
Precio en línea: $49.04
Free Ground Shipping All Orders $49+

RP80977

3.35 34
Image-RP47888

Allora®

Allora® Dispensador de jabón/loción - Conjunto de cuerpo

Precio de lista: $15.30
Precio en línea: $11.64
Free Ground Shipping All Orders $49+

RP47888

4.38 16
Image-RP80523

Delta®

Delta® Conjunto de contrapeso de manguera

Precio de lista: $49.20
Precio en línea: $37.48
Free Ground Shipping All Orders $49+

RP80523

Image-RP60923

Delta®

Delta® Espaciadores de rozamiento y abrazadera - Cocina

Precio de lista: $22.45
Precio en línea: $17.12
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP60924

Delta®

Delta® Llave - Llaves con tecnología de sellado DIAMOND™ Seal

Precio de lista: $23.85
Precio en línea: $18.16
Free Ground Shipping All Orders $49+

RP60924

5.00 1
Image-Master-RP51480

Leland®

Leland® Conjunto de rociador - Extensible (cocina)

Precio de lista: $113.45 - $272.80
Free Ground Shipping All Orders $49+

RP51480

Image-RP13938

Delta®

Delta® Junta tórica

Precio de lista: $7.60
Precio en línea: $5.80
Free Ground Shipping All Orders $49+

RP13938

4.50 2
RESEÑAS
Rated 5 out of 5 by from GREAT PRODUCT, EXCEPTIONAL exceptional PRODUCT. The local plumbing shop had it less than anywhere. Just installed this and am overjoyed with the function and easy of use,
Date published: 2025-03-24
Rated 5 out of 5 by from It was easy to install and a far price and shipping was fast [This review was collected as part of a promotion.] This is a great faucet with features that work for you
Date published: 2025-03-20
Rated 5 out of 5 by from Kitchen faucet, great quallity! I am very pleased with my purchase. It seems like a well made product, good quality.
Date published: 2025-02-15
Rated 1 out of 5 by from Poor design and engineering Will not output hot water. Internal mechanism is broken and will only supply cold water.
Date published: 2024-12-22
Rated 5 out of 5 by from PULL-DOWN IS WONDERUL! THIS DELTA FAUCET IS UNIQUE AND WORKS PERFECT!
Date published: 2024-11-11
Rated 5 out of 5 by from Will Not Disappoint Excellent quality. We love the way it functions.Great price. Great value.
Date published: 2024-09-25
Rated 4 out of 5 by from Looks good. Design needs work - see my mod! Why do they think the nozzle should be about 6" above the sink rim? This causes splashing above the sink rim I extended with a stainless spring. FREE DESIGN TIP!
Date published: 2024-07-24
Rated 2 out of 5 by from Started dripping within months Had a plumber purchase and install this faucet. It was ok for a few months and then started dripping. After reading some of these reviews I’m thinking I need to replace the cartridge, but I kept thinking it was too soon. I should still be under warranty but the plumber disposed of the packaging. Is there anywhere else to find this information?
Date published: 2024-06-26
  • y_2025, m_7, d_5, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_765
  • loc_en_US, sid_9178-RB-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

What is the difference in the 9178-RB-DST and the 19978Z-RB-DST? Is one just branded for the big box stores and if so, are they exactly the same quality and warranty?

Asked by: Jethro
Hi, Jethro! Thank you for your question. The Delta 9178-RB-DST Faucet can be purchased anywhere while the Delta 19978Z-RB-DST is exclusive to Home Depot. However, both are the exact same. All Delta faucets feature the same quality parts, materials, and workmanship, no matter what kind of dealer sells them. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can you reverse the faucet installation so that the on/off lever is on the left side?

Asked by: Michael
Thank you for your inquiry, Michael! We recommend installing the Delta Linden Pull-Down Kitchen 9178-RB-DST faucet with the handle on the right. You may install it with the handle on the front or left side, but the temperature adjustment will be opposite of the standard operation for single handle faucets. You can compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button will no longer indicate the correct temperature. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

are there any plastic parts on this faucet?

is the faucet stanless steel or another type metal?
Asked by: se
Thank you for your question. Delta faucet model # 9178-RB-DST is composed of metallic and non-metallic components.
Answered by: Delta1
Date published: 2024-03-28

My counter top has two holes in it, 1 large & 1 small. One is for the faucet & the other for the sprayer. Will I be able to install the Model 9178-RB-DST in it & have the deck plate cover the smaller hole? If no, can you suggest a different model number?

Asked by: Kitchen Faucet
Hi, Kitchen Faucet! Thank you for your question. We recommend to check the technical specifications sheet for measurements to verify if this faucet will fit in your sink: https://media.deltafaucet.com/SpecSheet/DSP-K-19978-SD-DST%20Rev%20D.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

I would like to take off the faucet head because it has begun to spray - I assume build up is inside the head. I see the little piece you can push in but it doesn't want to come apart from the hose easily. Is there a trick to take the head off?

Asked by: Christy
Hello Chritsy, Thank you for your inquiry! The wand/sprayer assembly of the Delta Leland Pull-Down Kitchen 978-AR-DST faucet, an be remove by simply unscrewing it from the end of the hose assembly. This should be done by hand only. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

The spec indicates a min clearance of 2.5 inches from center of hole for faucet to backsplash. I only have 2 inches.  Why is 2.5 inches needed since the handle goes forward and not back? Will 2 inches work? 

Asked by: Bridget
Thank you for your question, Bridget! The minimum clearance to the back splash is typically suggested for lavatory models with lift rods or for models where the handle does reach backwards. This is still suggested for maximum comfort and ease of use with the handle; however this model can still work with only 2". Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

I see where you have answered the question about the difference between Model 9178 and 9678. What is the difference between those and Model 19978?

Asked by: Kathy61
Hello Kathy 61, Thank you for your question. The Delta Leland Pull-Down 19978-SS-DST faucet is a Home Depot exclusive model and it is similar to the Leland 9178-AR-DST faucet. However, the 9178-AR-DST is designed with the ShieldSpray feature and the 19978-SS-DST model is not. https://media.deltafaucet.com/SpecSheet/DSP-K-19978-SD-DST%20Rev%20C.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

fawcet is leaking do you have repair kit

Asked by: tttt
Hi, tttt! Thank you for your question, and I am sorry to hear that you are experiencing a leak from your Delta faucet. There is a bonnet nut that is holding the cartridge down, underneath your handle. We recommend to tighten the bonnet nut to stop the leak. To do this, turn the water off at your shut off valve. Remove the handle. Pull the cartridge out to clean the bottom puck of the cartridge. Reinstall the cartridge assembly. Tighten the bonnet by turning clockwise, to the right. Install the handle back on and turn the water back on. Test the faucet. If the faucet still leaks, we recommend to replace both the valve cartridge assembly, RP50587, and the bonnet nut, RP51503. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

I have granite countertops with two existing holes. One hole is only 1.375" dia. Is this large enough for the handle?

Asked by: Jerry
Hi Jerry, Thank you for your question! Below is the link technical specification sheet for the model 978-DST which will provide the information you are looking for. http://www.deltafaucet.com/customersupport/documentation/978-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

What is the tubing for the pull-out spray made of? I am concerned about the materials as the drinking water is now being consumed from this spray.

Asked by: jdog
Hello jdog, Thank you for your question. The hose assembly of the Delta Leland Pull-down Kitchen 9178-AR-DST faucet is made out of woven nylon and has an Ultracore inner lining. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

If handle is mounted on the right, when you pull the handle toward you, should you get hot or cold water?

Asked by: Lisa
You should get cold water
Answered by: LuongLee
Date published: 2024-03-28

Does arctic stainless water spot?

Asked by: Melody
Hi, Melody! Thank you for your question. The 9178-AR-DST Arctic Stainless will show water spots. We recommend to wipe clean with a soft towel. If you should need something stronger, we recommend 50% white vinegar and 50% water solution to clean. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Water pressure has become low at kitchen faucet. How do we take the sprayer apart to clean it?

Asked by: Cathy
Thank you for your question, Cathy! This Leland model included a cashe aerator wrench, part number RP50815 that is used to remove this aerator counterclockwise. It is designed to clip onto the Pex supply line below the counter but a pair of needle nose pliers may be carefully used in its place. We would also recommend removing the entire wand from the hose and spraying directly into the sink. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50815 Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

I have the Delta Leland touch faucet 9178 TAR DST. Can it still work when the batteries go dead

Asked by: LID
Hi LID, Thank you for your question! The light will flash red when the batteries are low. You can remove the batteries while the water is running to switch to manual mode. You can also turn the faucet off with the handle, disconnect the solenoid, and connect the hose directly to the faucet to bypass the solenoid. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-06-21

Hi, Can this model be used on a 2 hole D shaped kitchen sink? 

Asked by: Paula
Hi, Paula! Thank you for your question. The Delta 978-ARWE-DST requires two holes at the size of 1 5/16" - 1 1/2" (33mm-38 mm). Here is a link to the technical specifications sheet for this unit: https://media.deltafaucet.com/SpecSheet/dsp-k-978-dst_G.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What is the difference between the 978-RB-DST, the 9978-RB-DST and the 978-RBWE-DST faucets? Also, can you get this type faucet with the 2.2 GPM wand?

Asked by: Confused
Thank you for your questions. Delta Faucet model # 978-RB-DST is a kitchen faucet that flows at 1.8 gpm at 60 psi. Delta Faucet model # 978-RBWE-DST is the same kitchen faucet as above but it flows at 1.5 gpm at 60 psi. Lastly, Delta Faucet model # 9978-RB-DST is the same faucet as the other two but in a smaller version for a bar/prep faucet. It flows at 1.8 gpm at 60 psi. We do not make a version of this faucet that will flow at 2.2 gpm at 60 psi.
Answered by: Delta1
Date published: 2024-03-28

Is there a method to keep the Leland faucet centered on the plate provided to cover the extra sink holes? Mine keeps sliding all over the place leaving a gaping grin were it fits onto the cover plate.

Asked by: Mr Streck 88yrs
Hi, Mr Streck 88yrs! Thank you for your question. I am sorry to hear that you are experiencing an issue with your Delta 9178-AR-DST faucet. We recommend to tighten the mounting nut for the faucet, under the sink to secure. You may also use a bit of silicon sealant around the plate at the sink base to secure the plate. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can I buy a handle only

Asked by: Victor
Thank you for your question, Victor! The Leland handle for model 978-RBWE-DST is part number RP46748RB. https://media.deltafaucet.com/PartsDiagram/DPD-K-978-DST_B.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

I plan to replace my kitchen faucet with the Leland 9178-AR-DST. The 9178 spec sheet indicates that the temperature handle movement is from centerline of the body away from the sink. The Q&A seems to contradict this. Please clarify?

Asked by: TomA1
Hello TomA1, Thank you for your question. The handle of the Delta Leland Pull-down Kitchen 9178-AR-DST faucet operates by moving/pushing it away/outwards from the faucet to turn on the cold water. Rotating the handle towards the back to adjust for warm and hot water. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Is Venetian Bronze still available? The photos look suspiciously like oil-rubbed bronze. We are replacing a faucet in our kitchen, and there are two sinks in close proximity. It will be obvious if the finishes are not the same.

Asked by: david524
Thank you for your question, david524! Delta model 978-RB-DST is only offered in Venetian Bronze which is a dark chocolate brown color with copper brushed highlights throughout. Oil Rubbed Bronze is a much darker, almost black finish with copper accents but without brushed marks. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

what is the height of the faucet, measuring from granite countertop (no plate) to highest point?

Asked by: Bill
Hi Bill, Thank you for your question! The faucet is 14 7/8" from the deck to the top of the spout. Please refer to the Technical Specifications under the Product Support tab for more information. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

WHAT IS THE DIMENSION OF THE HOLE TO BE DRILLED IN THE C-TOP?

Asked by: LINDA
Hello, Thank you for your question! The hole size should be 1 3/8". Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-04-23

ARe these made of metal or plastic?

Cannot locate what the material is of the faucet. Ordered it, delivered today. Shock that it is plastic and not metal.
Asked by: JB
Hi JB, Thank you for your question. The handle assembly is metal. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

How do you clean a pull down spray attachment that has a blockage both in stream and spray mode?

Asked by: Eddie
Hi Eddie, Thank you for your question. You can soak the wand assembly of the Delta Leland Bar/Prep 9678-SP-DST faucet, in a 50/50 solution of vinegar and water to help clean the mineral build up, be sure to rinse when done. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

What should the hole size in the counter be for a 9178-SP-DST

Asked by: Bobby
Thank you for your question, Bobby! We recommend a hole size of 1 3/8". Please refer to the Technical Specifications for this and other measurements: https://media.deltafaucet.com/SpecSheet/DSP-K-19978-SD-DST%20Rev%20D.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

We have Frigidaire's Gallery series stainless steel appliances in our kitchen (Like this: https://www.frigidaire.com/Kitchen-Appliances/Refrigerators/French-Door-Refrigerator/FGHB2868TF/). Will the Arctic Stainless or Spotshield Stainless match better?

Asked by: agolin
Hi, agolin! Thank you for your question. Arctic Stainless is a brushed finish like Stainless Steel. Over the years, the color of stainless steel used on appliances and sinks has migrated from warmer tones, with more red in the color spectrum, to lighter tones where blue is more predominant. Arctic Stainless features cooler metallic tones, following a trend seen throughout the kitchen. Stainless Steel is has warmer tones, similar to brushed nickel. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Any recommendations for cleaning the hose of the pull down sprayer on model #9178 AR-DST

Asked by: Dave
Hello Dave, Thanks for your question! You can clean any of the parts on your Delta kitchen faucet with a 50/50 solution of white vinegar and water. I hope this helps! Best Regards, Justin
Answered by: DeltaFaucet9
Date published: 2024-03-28

Is it possible to increase the gpm flow rate of this faucet? If so, what part should be ordered?

Asked by: meb
Hi meb, Thank you for your question. Delta Faucet model # 978-RB-DST has a flow rate of 1.8 gpm at 60 psi. We do offer a wand assembly that includes an aerator which will increase the flow rate to 2.2 gpm at 60 psi. That model number is RP51480RB. Thanks, JessW
Answered by: JessW
Date published: 2024-03-28

Can the Valve Assembly Cartridge be changed to allow the Handle to be vertical?

Asked by: Bill K
Hi, Bill K! Thank you for your question. The Delta 9178-AR-DST Faucet valve cartridge assembly cannot be repositioned for the handle to be vertical. We do apologize for any inconvenience this may cause. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Difference in finishes

What is the difference between your arctic stainless finish and your stainless finish? Does one match stainless steel appliances better than the other?
Asked by: cagriffie
Thank you for your question. Delta Faucet Artic Stainless finish has a bluish tint to it and does more closely resemble the stainless steel appliances that are out in the market today. Delta Faucet Stainless Steel finish has a more gold finish to it and is used in the bathroom to match the gold toned finishes there.
Answered by: Delta
Date published: 2024-03-28
  • y_2025, m_7, d_5, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_568
  • loc_en_US, sid_9178-RB-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 65ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.