Leland®
Ver toda la colección para cocina Leland®

Llave para cocina extensible de una manija con tecnología ShieldSpray® en Venetian Bronze

N.º de modelo: 9178-RB-DST
Agregar a favoritos
Busque instaladores locales de Delta®
Leland®
Ver toda la colección para cocina Leland®
Llave para cocina extensible de una manija con tecnología ShieldSpray® en Venetian Bronze
N.º de modelo: 9178-RB-DST
Precio de lista: $69500
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
El acoplamiento MagnaTite® de Delta® cuenta con un potente imán integrado que permite colocar la varilla de rociado de la llave en su lugar y la sostiene allí para que permanezca acoplada cuando no está en uso. La tecnología ShieldSpray® de Delta® limpia con precisión láser y, a su vez, evita el desorden y las salpicaduras. Un chorro concentrado quita con potencia los restos difíciles de comida y, a la vez, un innovador escudo de agua contiene las salpicaduras y elimina el desorden. De esta manera, usted pasará menos tiempo remojando, fregando y cambiándose de camisa. Las llaves con tecnología de sellado DIAMOND™ Seal de Delta® funcionan como si fueran nuevas de por vida porque cuentan con un diseño patentado gracias al cual se reducen los puntos de fuga, la instalación es más sencilla y duran el doble que el estándar de la industria*. Las llaves para cocina con orificios rociadores Touch-Clean® le permiten limpiar con facilidad la acumulación de calcio y cal con solo deslizar el dedo. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida. *Estándar de la industria basado en ASME A112.18.1 de 500,000 ciclos.
  • El acoplamiento MagnaTite® utiliza un potente imán integrado para colocar la varilla rociadora de la llave de manera precisa en su lugar y mantenerla allí para que permanezca acoplada cuando no está en uso, y no se cae con el tiempo
  • La tecnología ShieldSpray® soluciona el problema sin provocar problemas
  • El chorro concentrado evita el desorden y el escudo de agua innovador reduce las salpicaduras
  • Los suaves orificios rociadores de goma Touch-Clean® le permiten limpiar fácilmente la acumulación de calcio y cal con solo deslizar el dedo
  • Gracias a la tecnología de sellado DIAMOND™ Seal, la instalación es más fácil y la llave funciona como si fuera nueva de por vida, ya que se reducen los puntos de fuga y la duración es dos veces superior en comparación con los productos estándar de la industria.
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex®
  • Instalación con 1 o 3 orificios de 8"
  • Incluye cubierta opcional para uso con configuraciones de montaje adicionales y aspecto integrado
  • Cumplimiento con la ADA
  • El diseño de cuello de ganso con arco elevado gira 360 grados con una manguera retráctil de 20" para una comodidad superior durante las tareas cotidianas de la cocina.
Technology and Special Features
Cumplimiento con la ADA
Touch-Clean®
Libres de plomo
Uso eficiente del agua
Tecnología de sellado Diamond Seal®
ShieldSpray®
Acoplamiento MagnaTite®
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver especificaciones técnicas
Ver hoja de mantenimiento e instalación
Ver diagrama de repuestos y accesorios
Registrar su producto
Información de instalación
Instalación con 1 o 3 orificios de 8"
Instalación con 1 o 3 orificios de 8"
Overall Height (in.) :
14 27/32
Caudal:
1.8 gpm a 60 psi, 6.8 l/min. a 414 kPa
Tipo de válvula:
Válvula de sellado DIAMOND™

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Explorar videos
LISTA DE PIEZAS

LISTA DE PIEZAS

1 2 >
Image-RP40650

Michael Graves™

Michael Graves™ Tornillo de fijación

Precio de lista: $6.60
Precio en línea: $5.04
Free Ground Shipping All Orders $49+

RP40650

5.00 3
Image-RP37490

Delta®

Delta® Placa de estabilización

Precio de lista: $27.10
Precio en línea: $20.64
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-Master-RP50813

Delta®

Delta® Dispensador de jabón/loción

Precio de lista: $56.30 - $87.45
Free Ground Shipping All Orders $49+

RP50813

Image-Master-RP63195

Leland®

Leland® Kit de manija tipo palanca de metal

Precio de lista: $67.35 - $106.20
Free Ground Shipping All Orders $49+

RP63195

Image-RP63263

Delta®

Delta® Kit de adaptadores - Compresión PEX (4)

Precio de lista: $41.80
Precio en línea: $31.84
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-RP50815

Victorian®

Victorian® Aireador y llave, retráctil o extensible

Precio de lista: $28.65
Precio en línea: $21.84
Free Ground Shipping All Orders $49+

RP50815

4.54 26
Image-Master-RP51502

Delta®

Delta® Casquillo

Precio de lista: $16.65 - $45.80
Free Ground Shipping All Orders $49+

RP51502

Image-RP21945

Delta®

Delta® Dispensador de jabón/loción - Tuerca

Precio de lista: $7.65
Precio en línea: $5.84
Free Ground Shipping All Orders $49+

RP21945

3.00 1
Image-Master-RP47274

Delta®

Delta® Cubierta - 10"

Precio de lista: $50.95 - $182.00
Free Ground Shipping All Orders $49+

RP47274

Image-RP80977

Delta®

Delta® Kit de imanes de recambio

Precio de lista: $64.35
Precio en línea: $49.04
Free Ground Shipping All Orders $49+

RP80977

3.35 34
Image-RP47888

Allora®

Allora® Dispensador de jabón/loción - Conjunto de cuerpo

Precio de lista: $15.30
Precio en línea: $11.64
Free Ground Shipping All Orders $49+

RP47888

4.38 16
Image-RP80523

Delta®

Delta® Conjunto de contrapeso de manguera

Precio de lista: $49.20
Precio en línea: $37.48
Free Ground Shipping All Orders $49+

RP80523

Image-RP60923

Delta®

Delta® Espaciadores de rozamiento y abrazadera - Cocina

Precio de lista: $22.45
Precio en línea: $17.12
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP60924

Delta®

Delta® Llave - Llaves con tecnología de sellado DIAMOND™ Seal

Precio de lista: $23.85
Precio en línea: $18.16
Free Ground Shipping All Orders $49+

RP60924

5.00 1
Image-Master-RP51480

Leland®

Leland® Conjunto de rociador - Extensible (cocina)

Precio de lista: $113.45 - $272.80
Free Ground Shipping All Orders $49+

RP51480

Image-RP13938

Delta®

Delta® Junta tórica

Precio de lista: $7.60
Precio en línea: $5.80
Free Ground Shipping All Orders $49+

RP13938

4.50 2
RESEÑAS
Rated 5 out of 5 by from GREAT PRODUCT, EXCEPTIONAL exceptional PRODUCT. The local plumbing shop had it less than anywhere. Just installed this and am overjoyed with the function and easy of use,
Date published: 2025-03-24
Rated 5 out of 5 by from It was easy to install and a far price and shipping was fast [This review was collected as part of a promotion.] This is a great faucet with features that work for you
Date published: 2025-03-20
Rated 5 out of 5 by from Kitchen faucet, great quallity! I am very pleased with my purchase. It seems like a well made product, good quality.
Date published: 2025-02-15
Rated 1 out of 5 by from Poor design and engineering Will not output hot water. Internal mechanism is broken and will only supply cold water.
Date published: 2024-12-22
Rated 5 out of 5 by from PULL-DOWN IS WONDERUL! THIS DELTA FAUCET IS UNIQUE AND WORKS PERFECT!
Date published: 2024-11-11
Rated 5 out of 5 by from Will Not Disappoint Excellent quality. We love the way it functions.Great price. Great value.
Date published: 2024-09-25
Rated 4 out of 5 by from Looks good. Design needs work - see my mod! Why do they think the nozzle should be about 6" above the sink rim? This causes splashing above the sink rim I extended with a stainless spring. FREE DESIGN TIP!
Date published: 2024-07-24
Rated 2 out of 5 by from Started dripping within months Had a plumber purchase and install this faucet. It was ok for a few months and then started dripping. After reading some of these reviews I’m thinking I need to replace the cartridge, but I kept thinking it was too soon. I should still be under warranty but the plumber disposed of the packaging. Is there anywhere else to find this information?
Date published: 2024-06-26
  • y_2025, m_7, d_6, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_765
  • loc_en_US, sid_9178-RB-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 4ms
  • reviews, product
Preguntas y respuestas

Stainless steel vs arctic finish

We have 2 year old whirlpool appliances and will be installing a countertop with Solera SR305 sink under counter mount stainless steel sink. Your opinion please on the arctic or stainless steel finish for delta leader faucet 19978 or 9178 This is a one shot deal so I need to get it right. Thanks
Asked by: Diane
Hi Diane, Thank you for your question. There is a slight difference between the Delta Faucet Stainless Steel finish and the Delta Faucet Artic Stainless finish. Stainless Steel has a gold tone to it and is mostly used in the bath. Artic Stainless has a blue tint to it and more closely matches stainless steel appliances out in the market today. It is only used in the kitchen. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

how Do I remove the aerator from the spray head to clean? It appears to have mineral buildup and needs a good cleaning.

It is a Leland Model 978 SS DST-STAINLESS
Asked by: BOB
Hi Bob, Thank you for your question. In order to remove the aerator, you will need to use the aerator wrench RP50815. Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2024-03-28

Hello - I have a Single Handle Pull-Down Kitchen Faucet with ShieldSpray® Technology Leland® - Model#: 9178-AR-DST. Can this be mounted so the handle is facing the front versus a side mount so that the handle is over the sink? Thanks

Asked by: Jane
Hello Jane, Thank you for your question. We recommend installing the Delta Leland Pull-Down Kitchen 9178-AR-DST faucet with the handle on the right. You may install it with the handle on the front or left side, but the temperature adjustment will be opposite of the standard operation for single handle faucets. You can compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button will no longer indicate the correct temperature. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

what is the hole size i need to drill for a delta faucet 9178 dts

Asked by: Peter J
Hi, Peter J! Thank you for your question. The hole size to drill for the Delta 9178-AR-DST is 1 3/8" (35 mm). Here is a link to show further measurements for the faucet: https://media.deltafaucet.com/SpecSheet/DSP-K-19978-SD-DST%20Rev%20D.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

We’ve had our 9178-DST for 5 months & constantly have water puddles from our hands on our Quartz countertop. Constantly drying around the faucet. Can we move this so the handle is in the front instead of the right side and has anyone else done this. 

Asked by: Shari
Thank you for your question, Shari! This Delta model can be installed with the handle in front if desired. You will simply need a helper to hold the faucet in place while you loosen the mounting nut below the counter just enough to reposition the faucet. You may also want to consider upgrading to the Touch20 version of this model which will allow you turn the faucet on or off with a quick flick of the wrist. https://www.deltafaucet.com/kitchen/product/9178T-DST Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Does the spray function continue without requiring continual hold of the button?

Asked by: Jen
Hi Jen, Thank you for your question. Delta Faucet model # 9978-AR-DST does not require you to hold the button down to change from spray to stream. It will stay in the spray mode until you switch it back to stream even after the faucet is turned off.
Answered by: Delta1
Date published: 2024-03-28

What escutcheon plate can be purchased for a 978-AR-DST, to go from a four hole to a two hole

Asked by: C
Hi C, Thank you for your question. The 978-AR-DST offers an escutheon to go from a 2 hole to a 4 hole installation but unfortunately does not offer a 2 hole escutcheon. The spout and valve are 2 separate pieces. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Where can I buy faucet parts for Delta 9978-ar-dst

Asked by: Sharon
Thank you for your question, Sharon! On the model's web page, there is a Where to Buy tab. Under this tab, you can find local and online retailers who may carry parts for model 9978-AR-DST. However, we can't guarantee that a specific retailer would have an item in stock. If you need further assistance, feel free to contact us directly. Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

what is the purpose of the red plastic slide switch at the top of the valve assembly?

Asked by: jerry
Hi, Jerry! Thank you for your question. The switch on the valve assembly is a handle limit stop. Position 1, to the left, allows full handle motion (the full range between “all cold” to “all hot”). The faucet is set in position 1 in the factory. Position 2, to the right, allows half of the normal handle motion (“all cold” to “mixed hot/cold”). The handle limit stop can be adjusted by the homeowner once the faucet is installed. Setting the handle limit stop in position 2 may help to prevent scalding because it limits the amount of hot water in the mix; however, this handle limit stop will not always prevent scalding because it does not compensate for incoming pressure or sudden water temperature changes. To change positions of the handle limit stop: remove the handle; move the valve stem to the all cold position so the water is on; change the position of the handle limit stop; turn off the water; reinstall the handle. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Regarding handle placement and the meaning of 'front' If I'm standing at the sink, is front closer to me and under the spout? Installing on an island where clearance is not a factor, can the handle be in the back, opposite the sink side?

Asked by: lhlin
Thank you for your question, LHLIN! The handle placement in "front" would refer to being under the spout and closest to the user. For an installation where clearance does not matter, you can install this model with the handle facing to the back since the spout swivels 360 degrees. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

installation on a mica countertop w/farm sink

How far back from a farm sink would be a safe installation for this faucet on brand new mica counter tops?
Asked by: new kitchen
new kitchen, Thank you for your question. The spout extends 9 1/4" from the center of the faucet to the center of the aerator and we advise to allow 2 1/2" clearance to the backsplash. However, it is up to you to decide where to install the faucet in your installation. Please refer to the Technical Specifications for more measurements. https://media.deltafaucet.com/SpecSheet/DSP-K-19978-SD-DST%20Rev%20D.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Does the leland arctic stainless 978-ARWE-DST come with a soap dispenser?

Asked by: Philippa
Thank you for your question, Philippa! Model 978-ARWE-DST does not include a soap dispenser. The Leland dispenser can be purchased separately as part number RP50813AR. https://www.deltafaucet.com/kitchen/product/RP50813AR Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Does this have to be mounted 4" apart or is 5 or 6" possible?

Asked by: Mary
Dear Mary, Thank you for your question. The Delta Leland Kitchen faucet 978-WE-DST model has the 4" installation requirement for the outstanding reach of the 59" hose assembly. Installing the the handle and faucet 5" or 6" apart would effect the reach of the hose assembly. Best regards, Tanya
Answered by: Tanya
Date published: 2019-02-24

We will have Frigidaire's Gallery series stainless steel appliances in our kitchen. Will Delta's Arctic Stainless or Spotshield Stainless finish match better?

Asked by: agolin
Hi Agolin, Thank you for your question. There is a slight difference between the Delta Faucet SpotShield Stainless Steel finish and the Arctic Stainless finish. The SpotShield Stainless Steel has a spot-resistant neutral, low-gloss finish. The Arctic Stainless has a blue tint to it and more closely matches stainless steel appliances out in the market today. It is only used in the kitchen. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Our faucet is almost 10 years old, and it is hard to keep the faucet from dripping.  We have to try a few times and get the on/off mechanism in just the right place for the dripping to stop.  What kind of repair might this faucet need?  Thanks in advance.

Asked by: MLyons
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-04-29

what is difference between 9978 model and 978 model?

I need the Leland single hand pull down faucet (2 holes) in the brilliant stainless. I've seen both the 978 model as well as 9978...are these different?
Asked by: WWA
Hello WWA, Thank you for your question! The 9978-DST is a bar/prep faucet generally used in smaller side sinks. As a result, the faucet itself is much smaller than the 978-DST, which is the regular kitchen sink faucet. You can take a look at each faucet's Technical Specifications for further details. I hope this helps!
Answered by: DeltaFaucet9
Date published: 2024-03-28

Does this faucet have any lead in it?

Asked by: Aimee
Hi, Thank you for contacting us. We apologize for any inconvenience. We are more than happy to help you. Delta Faucet Company products that carry the Prop 65 label pictured above include components made with brass, which contains small but detectable amounts of lead—an element included on the Prop 65 chemical list. Brass has a decades-long history of successful use in plumbing applications. Even though a product may be found to contain a Proposition 65-listed chemical, it does not mean that use of the product will cause cancer, birth defects or other reproductive harm. Nor does it mean that a product is unsafe. All Delta Faucet Company products meet or exceed the requirements of applicable product performance and safety industry standards, as well as the federal Safe Drinking Water Act. We are confident there is no health hazard associated with the installation, use or removal of any of our products. With DST models, the water does not come in contact with the outer shell of the faucet. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2024-03-28

I bought this through amazon and the aerator is 1.8 gpm, we don't have any local code restrictions and I would like to find a 2.2 gpm aerator that would fit this . Someone (from delta) recommended Delta RP53998 2.2 Gpm Aerator, Chrome. This was to big

Asked by: Sharon
Thank you for your question, Sharon! I apologize for the confusion with this part and we are happy to help. The aerator RP53998 is not meant for the new Spotshield wand that now comes with this model. We do offer a 2.2 gpm aerator with the correct thread size for your wand as part number RP46827. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP46827 Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

We are buying Beverage Faucet 1914-SS-DST and a Leland 9178-nn-DST for the same sink. It comes in -SP- Spotless and -AR-Arctic. Which looks most like the -SS- beverage faucet? We have brushed nickel everywhere else.

Asked by: DavidB
Thank you for your question, DavidB! SpotShield Stainless will match the Stainless Steel finish. Artcic Stainless features a cooler color temperature than the warmer Stainless Steel. Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

I read most of the answers to the questions. If the handle assembly is metal, what material is inside ? Is this product considered a middle quality

or is this still low - end quality? How much price range do I set to look for a middle quality for single handle pull down/pull out kitchen faucet? How often do I change the washer? I didn't buy this yet. I am checking your homepage to see which one I would like to buy.
Asked by: haru chan
Hello Haru Chan, Thank you for your questions. The internal cartridge for this faucet is manufactured with plastic, but it is a high quality of plastic. The rest of the material this Delta faucet is made with is also of high quality material. Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2016-10-31

Can I get this faucet before Dec 15th?

I have 2 of these faucets on order but I'm trying to get my house finished before Christmas. Is there anyway I can get these early. Thanks
Asked by: Desperately seeking faucet
Hi Desperately seeking faucet, Thank you for your question. Unfortunately since the model 9678-AR-DST is a new product launch the product is not scheduled to ship before 12/15/2014. There is no way to get the product earlier. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

everywhere online sells this for $179.But on your site & at my local K&B stores it is priced at $385.20? That's a HUGE difference in price! Are there two versions of this product out there? Does the cheaper price mean lesser quality?

Asked by: lefty
Hi Lefty, We appreciate your interest in Delta faucets. All Delta faucets feature the same quality parts, materials, and workmanship, no matter what kind of dealer sells them. The website shows the product at list price. Dealers purchase the product in bulk for selling it readily to consumers, so they are able to offer a much lower price. However, the quality of all Delta faucets are the same. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

can i purchase the pull down bar without the faucet

Asked by: rossi
Hi Rossi, Thank you for your question! The Spout body area can not be purchased separately from the valve control area. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

How can I clean inside the spray? Once a contractor used a special very small wrench to do it. Thanks

Asked by: LiliChi
Hi, LiliChi! Thank you for your question. The Delta 9178-SP-DST faucet does have a sprayer assembly with a removable aerator that can be removed with an aerator wrench. The kit is RP50815. Here is a link to this aerator and aerator wrench kit: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50815 Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What is the distance through air from the edge of the sprayer to the friction spacer when the faucet is fully retracted?

Asked by: Renee
Thank you for your question. We had one on display and I measured it. With the hose fully extended, you will have 21 inches of hose exposed.
Answered by: Delta1
Date published: 2024-03-28

Is it possible to increase GPM?

model: Leland 978-RB-DST I saw a response about increasing the GPM from 1.8 to 2.2 but the model # in the response could not be found when I searched for it. The response was RP514780RB, but is it really RP51480RB? Is replacing that part all that is needed? Is there a need to replace the O ring as well? I want to order a new faucet and will have it professionally installed, so want to be sure i order all the necessary parts. Thank you!
Asked by: MLK
Thank you for your question. The model number for the 2.2 gpm wand is RP51480RB. You will not need any extra orings to replace this wand. The wands will just need to be switched.
Answered by: Delta
Date published: 2024-03-28

Why is your list price $404.50 for Delta faucet Leland Model # 9178-ar-dst and And Amazon list price is $208.00 for the same model

Asked by: Rich
Hi, Rich! We appreciate your interest in Delta faucets. All Delta faucets feature the same quality parts, materials, and workmanship, no matter what kind of dealer sells them. Delta retail dealers usually sell faucets that include the handles in the boxes. Plumbing professionals and Delta Studio Showrooms sell faucets where the faucets and handles are packaged and sold separately ("LHP" models), giving the customer some additional styling choices. However, the quality of all Delta faucets is the same. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How long is the pull down hose on this faucet?

Asked by: Mandy
Hi Mandy, Thank you for your question! The hose assembly for the model 9978-AR-DST is 54" long. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

Does the soap dispenser fill from the top or from underneath the cabinet?

Asked by: karla
Hi Karla, Thank you for your question! All of our soap dispensers can be filled from the top using our RP30395 vented funnel. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

Really 2.5" min clearance to backsplash (4" high)? Want to replace a Moen Aberdeen with your Leland 978-DST. The Moen fits fine with 2" clearance from faucet midpoint to backsplash. Why can't I use 978-DST with same 2" center to backsplash clearance?

Asked by: KevinK
Hi, KevinK! Thank you for your question. We recommend the 2.5" clearance to backsplash for the 978-DST so that everything fits on the top of the sink as well as underneath the sink. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28
  • y_2025, m_7, d_6, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_4, bvpage2n
  • co_hasquestionsanswers, tq_568
  • loc_en_US, sid_9178-RB-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 31ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.