Llave para barra/preparación de alimentos extensible de una manija en Venetian Bronze

N.º de modelo: 9678-RB-DST
Llave para barra/preparación de alimentos extensible de una manija en Venetian Bronze
N.º de modelo: 9678-RB-DST
Precio de lista: $58930
CARACTERÍSTICAS DEL PRODUCTO
El acoplamiento MagnaTite® de Delta® cuenta con un potente imán integrado que permite colocar la varilla de rociado de la llave en su lugar y la sostiene allí para que permanezca acoplada cuando no está en uso. Las llaves con tecnología de sellado DIAMOND™ Seal de Delta® funcionan como si fueran nuevas de por vida porque cuentan con un diseño patentado gracias al cual se reducen los puntos de fuga, la instalación es más sencilla y duran el doble que el estándar de la industria*. Las llaves para cocina con orificios rociadores Touch-Clean® le permiten limpiar con facilidad la acumulación de calcio y cal con solo deslizar el dedo. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida. *Estándar de la industria basado en ASME A112.18.1 de 500,000 ciclos.
  • El acoplamiento MagnaTite utiliza un potente imán integrado para colocar la varilla rociadora de la llave de manera precisa en su lugar y mantenerla allí para que permanezca acoplada cuando no está en uso, y no se cae con el tiempo
  • Los suaves orificios rociadores de goma Touch-Clean® le permiten limpiar fácilmente la acumulación de calcio y cal con solo deslizar el dedo.
  • La tecnología de sellado DIAMOND es más fácil de instalar y ayuda a su llave a funcionar como si fuera nueva toda la vida, ya que reduce los puntos de fuga y dura dos veces más que los productos estándar de la industria
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex
  • Instalación con 1 o 3 orificios de 8"
  • Cubierta opcional disponible para comprar por separado
  • Cumplimiento con la ADA
  • La salida de la tina deslizable y de arco elevado gira 360°
Technology and Special Features
Cumplimiento con la ADA
Libres de plomo
Uso eficiente del agua
Documentos y especificaciones
Información de instalación
Instalación con 1 o 3 orificios de 8"
Instalación con 1 o 3 orificios de 8"
Altura total:
14 1/2
Voltaje:
0
Caudal:
1.8 gpm a 60 psi, 6.8 l/min. a 414 kPa
Tipo de válvula:
Disco cerámico

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

LISTA DE PIEZAS

LISTA DE PIEZAS

Image-RP40650

Michael Graves™

Michael Graves™ Tornillo de fijación

Precio de lista: $6.00
Precio en línea: $4.80
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP40650

5.00 3
Image-Master-RP63195

Leland®

Leland® Kit de manija tipo palanca de metal

Precio de lista: $61.05 - $96.30
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP63195

Image-Master-RP50813

Delta®

Delta® Dispensador de jabón/loción

Precio de lista: $50.55 - $78.35
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP50813

Image-RP21945

Delta®

Delta® Dispensador de jabón/loción - Tuerca

Precio de lista: $6.95
Precio en línea: $5.56
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP21945

3.00 1
Image-RP50815

Victorian®

Victorian® Aireador y llave, retráctil o extensible

Precio de lista: $26.00
Precio en línea: $20.80
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP50815

4.54 26
Image-Master-RP51502

Delta®

Delta® Casquillo

Precio de lista: $15.05 - $41.50
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP51502

Image-RP63263

Delta®

Delta® Kit de adaptadores - Compresión PEX (4)

Precio de lista: $37.90
Precio en línea: $30.32
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP63263

3.67 3
Image-Master-RP47274

Delta®

Delta® Cubierta - 10"

Precio de lista: $46.15 - $165.05
Envíos sin cargo para todos los pedidos de más de $49
Acabados Lumicoat
Acabados estándar

RP47274

Image-RP80977

Delta®

Delta® Kit de imanes de recambio

Precio de lista: $58.35
Precio en línea: $46.68
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP80977

3.35 34
Image-RP80523

Delta®

Delta® Conjunto de contrapeso de manguera

Precio de lista: $44.60
Precio en línea: $35.68
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP80523

Image-RP47888

Allora®

Allora® Dispensador de jabón/loción - Conjunto de cuerpo

Precio de lista: $13.85
Precio en línea: $11.08
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP47888

4.38 16
Image-RP60923

Delta®

Delta® Espaciadores de rozamiento y abrazadera - Cocina

Precio de lista: $20.35
Precio en línea: $16.28
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP60923

5.00 2
Image-RP60924

Delta®

Delta® Llave - Llaves con tecnología de sellado DIAMOND™ Seal

Precio de lista: $21.60
Precio en línea: $17.28
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP60924

5.00 1
Image-Master-RP51480

Leland®

Leland® Conjunto de rociador - Extensible (cocina)

Precio de lista: $102.90 - $247.40
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP51480

Image-RP13938

Delta®

Delta® Junta tórica

Precio de lista: $6.90
Precio en línea: $5.52
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP13938

4.50 2
Image-RP60911

Delta®

Delta® Abrazadera para manguera de conexión rápida

Precio de lista: $15.80
Precio en línea: $12.64
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP60911

2.64 11
RESEÑAS
Rated 5 out of 5 by from Great faucet! This faucet looks great and is high quality. Our plumber thought it was a great choice!
Date published: 2024-10-28
Rated 2 out of 5 by from Started dripping within months Had a plumber purchase and install this faucet. It was ok for a few months and then started dripping. After reading some of these reviews I’m thinking I need to replace the cartridge, but I kept thinking it was too soon. I should still be under warranty but the plumber disposed of the packaging. Is there anywhere else to find this information?
Date published: 2024-06-26
Rated 5 out of 5 by from Delta 9678-DST Well built, look's great, and nice finish.
Date published: 2024-06-24
Rated 3 out of 5 by from Looks great ….not happy with the diamond cartridge I've hd this installed when i had a granite top installed about 5 years ago still looks great. Not very pleased with the “diamond cartridge” i had to replace it twice, this time will be #3 . The first time it leaked into,the sink, the second time under the sink and onto the floor which had to be replaced…..in their defense they did send me a replacement cartridge free of charge. Now it is leaking again. Not sure what to do this time.
Date published: 2024-04-26
Rated 1 out of 5 by from A startling decline in quality My previous Leland lasted from 2008 until August of 2021 when the aerator began to deteriorate. Because at some point they changed the design of the Leland, I wound up having to get an entirely new faucet which Delta provided under warranty. I had to get this installed at considerable expense, and exactly 1 year later (08/22) I had to have them send me a new cartridge under warranty because it wouldn't close completely and it leaked. It is now 3/1/24 and it's leaking again, and will need its third cartridge in 3 years. Keep in mind my original made it 12 years on one cartridge. Furthermore, the old Leland used a mechanical clip to retain the sprayer head, but the new one uses a magnet. That magnet failed almost immediately and now the sprayer head just hangs. Overall I am incredibly disappointed in the nosedive in quality that Delta has apparently taken. This is also a $650 faucet, not the $59 Lowe's builder special, which makes this dismal quality all that more unacceptable. Do better, Delta.
Date published: 2024-03-02
Rated 1 out of 5 by from 2nd one and also JUNK!!! The second Leland and it's JUNK just like the first oneIt is very difficult to get this faucet in the exact position where it doesn't drip. There are many reviews saying the same, and I am frankly baffled that there are so many 5 star reviews as well. Delta's response is to engage in a lengthy process to flush out the hot and cold lines. I had this faucet for about 9 months and finally threw it out. The faucet I replaced it with requires no such flushing and easily turns off without drips. In my opinion this faucet design is defective and should not be sold.  Bought the 9178 DST it has very little water flow from it . All water lines were flushed. I would never recommend this faucet to anyone. e to hire my plumber to replace. To date, I will have spent too much time and effort phoning Delta and almost as much on my plumber as I have these faucets. Although I love the look, I can't afford to use Delta products ever again. So disappointed.
Date published: 2024-01-30
Rated 5 out of 5 by from solid faucet no complaints good pressure and temp select, install was easy with included wrench. magnet failed within 6mos, but delta sent replacement magnets and it's been 3yrs no issues. cleaned out both screens once a year (not hard water) had some problems with dripping bit tightened up the bolt behind sprayer and not an issue. can't take apart sprayer head with wrench...way too hard as there's a slight leak from bottom (separate from the stream or sprayer) and I bet a clean out would help, but it's stuck and included wrench with teeth cams out before i can loosen it...very minor beef after 3 yeara. LOVE THAT LASER STREAM!
Date published: 2024-01-22
Rated 5 out of 5 by from LOVE THIS FAUCET 😍 We've only ever purchased faucets from Amazon and box stores like home depot, only to have them fall apart within a year, at the most. This time, at the suggestion of friends who are contractors, we purchased our delta faucet from a local contractors warehouse. It was considerably more than the diy home improvement boxstores for the seemingly same product. But the quality of the overall weight, metal and other components is far superior and worth the price. Apparently manufacturers use a different grade of metals for faucets sold through an actual contractor's store versus the box stores even though on the surface they look the same. I have to say, even though I balked at this initially, and cringed at the price difference for what looked to be the same item, there's absolutely no comparison. I'll never go back to Amazon or the box stores for another faucet again. We had purchased the Delta Leland model #9178ARDST, Clos to 3 years ago and I absolutely love it and have not had a single problem with it falling apart or any other mechanical issues
Date published: 2024-01-08
  • y_2024, m_11, d_13, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_461
  • loc_en_US, sid_9678-RB-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

Does arctic stainless water spot?

Asked by: Melody
Hi, Melody! Thank you for your question. The 9178-AR-DST Arctic Stainless will show water spots. We recommend to wipe clean with a soft towel. If you should need something stronger, we recommend 50% white vinegar and 50% water solution to clean. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Water pressure has become low at kitchen faucet. How do we take the sprayer apart to clean it?

Asked by: Cathy
Thank you for your question, Cathy! This Leland model included a cashe aerator wrench, part number RP50815 that is used to remove this aerator counterclockwise. It is designed to clip onto the Pex supply line below the counter but a pair of needle nose pliers may be carefully used in its place. We would also recommend removing the entire wand from the hose and spraying directly into the sink. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50815 Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

I have the Delta Leland touch faucet 9178 TAR DST. Can it still work when the batteries go dead

Asked by: LID
Hi LID, Thank you for your question! The light will flash red when the batteries are low. You can remove the batteries while the water is running to switch to manual mode. You can also turn the faucet off with the handle, disconnect the solenoid, and connect the hose directly to the faucet to bypass the solenoid. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-06-21

Hi, Can this model be used on a 2 hole D shaped kitchen sink? 

Asked by: Paula
Hi, Paula! Thank you for your question. The Delta 978-ARWE-DST requires two holes at the size of 1 5/16" - 1 1/2" (33mm-38 mm). Here is a link to the technical specifications sheet for this unit: https://media.deltafaucet.com/SpecSheet/dsp-k-978-dst_G.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What is the difference between the 978-RB-DST, the 9978-RB-DST and the 978-RBWE-DST faucets? Also, can you get this type faucet with the 2.2 GPM wand?

Asked by: Confused
Thank you for your questions. Delta Faucet model # 978-RB-DST is a kitchen faucet that flows at 1.8 gpm at 60 psi. Delta Faucet model # 978-RBWE-DST is the same kitchen faucet as above but it flows at 1.5 gpm at 60 psi. Lastly, Delta Faucet model # 9978-RB-DST is the same faucet as the other two but in a smaller version for a bar/prep faucet. It flows at 1.8 gpm at 60 psi. We do not make a version of this faucet that will flow at 2.2 gpm at 60 psi.
Answered by: Delta1
Date published: 2024-03-28

Is there a method to keep the Leland faucet centered on the plate provided to cover the extra sink holes? Mine keeps sliding all over the place leaving a gaping grin were it fits onto the cover plate.

Asked by: Mr Streck 88yrs
Hi, Mr Streck 88yrs! Thank you for your question. I am sorry to hear that you are experiencing an issue with your Delta 9178-AR-DST faucet. We recommend to tighten the mounting nut for the faucet, under the sink to secure. You may also use a bit of silicon sealant around the plate at the sink base to secure the plate. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can I buy a handle only

Asked by: Victor
Thank you for your question, Victor! The Leland handle for model 978-RBWE-DST is part number RP46748RB. https://media.deltafaucet.com/PartsDiagram/DPD-K-978-DST_B.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

I plan to replace my kitchen faucet with the Leland 9178-AR-DST. The 9178 spec sheet indicates that the temperature handle movement is from centerline of the body away from the sink. The Q&A seems to contradict this. Please clarify?

Asked by: TomA1
Hello TomA1, Thank you for your question. The handle of the Delta Leland Pull-down Kitchen 9178-AR-DST faucet operates by moving/pushing it away/outwards from the faucet to turn on the cold water. Rotating the handle towards the back to adjust for warm and hot water. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Is Venetian Bronze still available? The photos look suspiciously like oil-rubbed bronze. We are replacing a faucet in our kitchen, and there are two sinks in close proximity. It will be obvious if the finishes are not the same.

Asked by: david524
Thank you for your question, david524! Delta model 978-RB-DST is only offered in Venetian Bronze which is a dark chocolate brown color with copper brushed highlights throughout. Oil Rubbed Bronze is a much darker, almost black finish with copper accents but without brushed marks. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

what is the height of the faucet, measuring from granite countertop (no plate) to highest point?

Asked by: Bill
Hi Bill, Thank you for your question! The faucet is 14 7/8" from the deck to the top of the spout. Please refer to the Technical Specifications under the Product Support tab for more information. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

ARe these made of metal or plastic?

Cannot locate what the material is of the faucet. Ordered it, delivered today. Shock that it is plastic and not metal.
Asked by: JB
Hi JB, Thank you for your question. The handle assembly is metal. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

How do you clean a pull down spray attachment that has a blockage both in stream and spray mode?

Asked by: Eddie
Hi Eddie, Thank you for your question. You can soak the wand assembly of the Delta Leland Bar/Prep 9678-SP-DST faucet, in a 50/50 solution of vinegar and water to help clean the mineral build up, be sure to rinse when done. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

What should the hole size in the counter be for a 9178-SP-DST

Asked by: Bobby
Thank you for your question, Bobby! We recommend a hole size of 1 3/8". Please refer to the Technical Specifications for this and other measurements: https://media.deltafaucet.com/SpecSheet/DSP-K-19978-SD-DST%20Rev%20D.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

We have Frigidaire's Gallery series stainless steel appliances in our kitchen (Like this: https://www.frigidaire.com/Kitchen-Appliances/Refrigerators/French-Door-Refrigerator/FGHB2868TF/). Will the Arctic Stainless or Spotshield Stainless match better?

Asked by: agolin
Hi, agolin! Thank you for your question. Arctic Stainless is a brushed finish like Stainless Steel. Over the years, the color of stainless steel used on appliances and sinks has migrated from warmer tones, with more red in the color spectrum, to lighter tones where blue is more predominant. Arctic Stainless features cooler metallic tones, following a trend seen throughout the kitchen. Stainless Steel is has warmer tones, similar to brushed nickel. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Any recommendations for cleaning the hose of the pull down sprayer on model #9178 AR-DST

Asked by: Dave
Hello Dave, Thanks for your question! You can clean any of the parts on your Delta kitchen faucet with a 50/50 solution of white vinegar and water. I hope this helps! Best Regards, Justin
Answered by: DeltaFaucet9
Date published: 2024-03-28

Is it possible to increase the gpm flow rate of this faucet? If so, what part should be ordered?

Asked by: meb
Hi meb, Thank you for your question. Delta Faucet model # 978-RB-DST has a flow rate of 1.8 gpm at 60 psi. We do offer a wand assembly that includes an aerator which will increase the flow rate to 2.2 gpm at 60 psi. That model number is RP51480RB. Thanks, JessW
Answered by: JessW
Date published: 2024-03-28

Can the Valve Assembly Cartridge be changed to allow the Handle to be vertical?

Asked by: Bill K
Hi, Bill K! Thank you for your question. The Delta 9178-AR-DST Faucet valve cartridge assembly cannot be repositioned for the handle to be vertical. We do apologize for any inconvenience this may cause. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Difference in finishes

What is the difference between your arctic stainless finish and your stainless finish? Does one match stainless steel appliances better than the other?
Asked by: cagriffie
Thank you for your question. Delta Faucet Artic Stainless finish has a bluish tint to it and does more closely resemble the stainless steel appliances that are out in the market today. Delta Faucet Stainless Steel finish has a more gold finish to it and is used in the bathroom to match the gold toned finishes there.
Answered by: Delta
Date published: 2024-03-28

When will this faucet be available in the Touch20?

Asked by: sev3
Hi Sev3, Thank you for your question. The Touch2O Technology version of the model 9178-AR-DST is the 9178T-AR-DST. The item will be available to order on 11/15/2014 and will begin shipping out 12/15/2014. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Are all the finishes in this line of product spot shield with anti microbial finish?

Asked by: Khyati
Hi Khyati, Thank you for your question. SpotShield technology is currently available only with the SpotShield Stainless (SP) finish. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Is this model the exact same where ever it is purchased?

My plumber installed this model 9178-Chrome-DST and charged me $769 for the faucet set, soap dispenser, and installation. When I told him the set was $200 on Amazon with free Prime shipping and so I thought the additional $569 was a bit high for installation his reply was that the quality of his Delta faucet was much better than what I could buy online, because he is a plumber. Is this true? Isn't a Model 9178 Chrome DST the same wherever it is bought??
Asked by: Theresa B
Dear Theresa B, Thank you for your question. We appreciate your interest in Delta faucets. All Delta faucets feature the same quality parts, materials, and workmanship, no matter what kind of dealer sells them. Delta retail dealers usually sell faucets that include the handles in the boxes. Plumbing professionals and Delta Studio Showrooms sell faucets where the faucets and handles are packaged and sold separately ("LHP" models), giving the customer some additional styling choices. However, the quality of all Delta faucets is the same. Best regards, Tanya
Answered by: Tanya
Date published: 2018-02-06

on a single hole install. What size hole?

Asked by: Wayne
Dear Wayne, Thank you for your question. The Technical Specifications for the Delta Leland Pull-down kitchen faucet 9178-AR-DSTmodel, lists the holes size as 1 3/8" (35 mm). i have included the document below. https://media.deltafaucet.com/SpecSheet/DSP-K-19978-SD-DST%20Rev%20C.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2016-10-04

What is distance required from center of fixture to backspash? I am looking at your Leland # 978-DST.

Asked by: Bill
Hi, Bill! Thank you for your question. The minimum clearance to back splash 2 1/2" (64 mm) for the Delta 978-AR-DST Faucet. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

I purchased the 9178-AR-DST less than a year ago.  I am having trouble figuring out what position the handle needs to be in for cold water.  Please help.  Is there a manual I can look at?

Asked by: Barb
Thank you for your question, Barb! When the faucet is installed with the handle on the right, the full cold position is when the handle is tilted away from the faucet and toward you. Moving it away from you will increase the temperature and moving it toward the faucet will reduce the volume. Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

Is the faucet intentionally set to the return to the center automatically?

Asked by: daryl
Thank you for your question, Daryl. The spout is not designed to center automatically. Please check to make sure that the hose is not twisted or catching on anything below the sink and that the faucet is installed on a level surface. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Can the faucet handle be mounted on the left side rather than the right?  If not, is there a similar faucet with a left side handle?

Asked by: Diane
Hello Diane, Thank you for your inquiry! We recommend installing the Delta Linden Pull-Down Kitchen 9178-AR-DST faucet with the handle on the right. You may install it with the handle on the front or left side, but the temperature adjustment will be opposite of the standard operation for single handle faucets. You can compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button will no longer indicate the correct temperature. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Hi. A new water meter was just installed at my home and I've lost prssure in my kitchen faucet. The City said I need to remove the aerator and rinse it, but I can't see how to remove that. The pressure is low on all three of the settings. Can you help me?

Asked by: Maritxu
Hi, Maritxu! Thank you for your question. The Delta 9178-SP-DST faucet sprayer aerator assembly can be removed with an aerator wrench. The aerator wrench kit is part number RP50815. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50815 Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

I have questions about the Delta Leland kitchen faucet. First, what is the difference between arctic stainless and spot shield stainless? Which one is more likely to match the color of a basic stainless sink?  Does the handle move forward and backward?

Asked by: mello
Hi, Mello! Thank you for your question. Arctic Stainless is a brushed finish like Stainless Steel. Over the years, the color of stainless steel used on appliances and sinks has migrated from warmer tones, with more red in the color spectrum, to lighter tones where blue is more predominant. Arctic Stainless features cooler metallic tones, following a trend seen throughout the kitchen. SpotShield Stainless is a spot-resistant, warm, low-gloss finish with warmer tones, similar to brushed nickel. The Delta 9178-SP-DST Faucet handle rotates forward for hot water. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Is this faucet manufactured in the USA?

Asked by: LeeB
Thank you for your question, LeeB! We're proud to manufacture most of our products at our plants in Jackson TN, Morgantown KY, Lapeer MI, and Greensburg, IN. The location information on the back of the box will tell you where each specific model was made. Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

what does the 978 AR DST means? There were several different number symbols for the Leland style. What is the difference?

what does the professional version mean. Why does it cost more.? What is the difference? Try to make an educated purchase for a new kitchen faucets. Plumber will install. I must make the purchase.
Asked by: Washington
Dear Washington. Thank you for your question. The Delta Leland Pull-Down kitchen model 978 (model style)- AR (Finish/color)- DST (Diamond Seal Technology). Delta Faucet Company’s DIAMOND Seal Technology is an exclusive new water delivery system that eliminates water’s contact with potential metal contaminants once water is inside the faucet. Pricing is based on several things such as model style, finish, any extra accessories that maybe offered with it, etc. Best regards, Tanya
Answered by: Tanya
Date published: 2021-01-19
  • y_2024, m_11, d_14, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_518
  • loc_en_US, sid_9678-RB-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 46ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.