Leland®
Ver toda la colección para cocina Leland®

Llave para barra/preparación de alimentos extensible de una manija en acero inoxidable SpotShield

N.º de modelo: 9678-SP-DST
Agregar a favoritos
Busque instaladores locales de Delta®
Leland®
Ver toda la colección para cocina Leland®
Llave para barra/preparación de alimentos extensible de una manija en acero inoxidable SpotShield
N.º de modelo: 9678-SP-DST
Precio de lista: $45235
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
El acoplamiento MagnaTite® de Delta® cuenta con un potente imán integrado que permite colocar la varilla de rociado de la llave en su lugar y la sostiene allí para que permanezca acoplada cuando no está en uso. La tecnología SpotShield™ de Delta® ayuda a mantener la llave más limpia durante más tiempo, ya que resiste las marcas de agua y de dedos. Mantenga su espacio impecable con la tecnología SpotShield, disponible en una variedad de acabados para la cocina y el baño. Las llaves con tecnología de sellado DIAMOND™ Seal de Delta® funcionan como si fueran nuevas de por vida porque cuentan con un diseño patentado gracias al cual se reducen los puntos de fuga, la instalación es más sencilla y duran el doble que el estándar de la industria*. Las llaves para cocina con orificios rociadores Touch-Clean® le permiten limpiar con facilidad la acumulación de calcio y cal con solo deslizar el dedo. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de Delta están respaldadas por nuestra garantía limitada de por vida. *Estándar de la industria basado en ASME A112.18.1 de 500,000 ciclos.
  • El acoplamiento MagnaTite utiliza un potente imán integrado para colocar la varilla rociadora de la llave de manera precisa en su lugar y mantenerla allí para que permanezca acoplada cuando no está en uso, y no se cae con el tiempo
  • La tecnología SpotShield ayuda a mantener la llave o la ducha más limpias durante más tiempo, ya que resisten las manchas de agua y de dedos.
  • Los suaves orificios rociadores de goma Touch-Clean® le permiten limpiar fácilmente la acumulación de calcio y cal con solo deslizar el dedo.
  • La tecnología de sellado DIAMOND es más fácil de instalar y ayuda a su llave a funcionar como si fuera nueva toda la vida, ya que reduce los puntos de fuga y dura dos veces más que los productos estándar de la industria
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex®
  • Instalación con 1 o 3 orificios de 8"
  • Cubierta opcional disponible para comprar por separado
  • Cumplimiento con la ADA
  • La salida de la tina deslizable y de arco elevado gira 360°
Technology and Special Features
Cumplimiento con la ADA
Touch-Clean®
Libres de plomo
SpotShield®
Tecnología de sellado Diamond Seal®
Acoplamiento MagnaTite®
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver especificaciones técnicas
Ver hoja de mantenimiento e instalación
Ver diagrama de repuestos y accesorios
Registrar su producto
Información de instalación
Instalación con 1 o 3 orificios de 8"
Instalación con 1 o 3 orificios de 8"
Overall Height (in.) :
14 1/2
Voltaje:
0
Caudal:
1.8 gpm a 60 psi, 6.8 l/min. a 414 kPa
Tipo de válvula:
Disco cerámico

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Explorar videos
LISTA DE PIEZAS

LISTA DE PIEZAS

1 2 >
Image-RP40650

Michael Graves™

Michael Graves™ Tornillo de fijación

Precio de lista: $6.00
Precio en línea: $4.80
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP40650

5.00 3
Image-Master-RP50813

Delta®

Delta® Dispensador de jabón/loción

Precio de lista: $50.55 - $78.35
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP50813

Image-Master-RP63195

Leland®

Leland® Kit de manija tipo palanca de metal

Precio de lista: $61.05 - $96.30
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP63195

Image-RP63263

Delta®

Delta® Kit de adaptadores - Compresión PEX (4)

Precio de lista: $37.90
Precio en línea: $30.32
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP63263

3.67 3
Image-RP50815

Victorian®

Victorian® Aireador y llave, retráctil o extensible

Precio de lista: $26.00
Precio en línea: $20.80
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP50815

4.54 26
Image-Master-RP51502

Delta®

Delta® Casquillo

Precio de lista: $15.05 - $41.50
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP51502

Image-RP21945

Delta®

Delta® Dispensador de jabón/loción - Tuerca

Precio de lista: $6.95
Precio en línea: $5.56
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP21945

3.00 1
Image-Master-RP47274

Delta®

Delta® Cubierta - 10"

Precio de lista: $46.15 - $165.05
Envíos sin cargo para todos los pedidos de más de $49
Acabados Lumicoat
Acabados estándar

RP47274

Image-RP80977

Delta®

Delta® Kit de imanes de recambio

Precio de lista: $58.35
Precio en línea: $46.68
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP80977

3.35 34
Image-RP80523

Delta®

Delta® Conjunto de contrapeso de manguera

Precio de lista: $44.60
Precio en línea: $35.68
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP80523

Image-RP47888

Allora®

Allora® Dispensador de jabón/loción - Conjunto de cuerpo

Precio de lista: $13.85
Precio en línea: $11.08
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP47888

4.38 16
Image-RP60923

Delta®

Delta® Espaciadores de rozamiento y abrazadera - Cocina

Precio de lista: $20.35
Precio en línea: $16.28
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP60923

5.00 2
Image-RP60924

Delta®

Delta® Llave - Llaves con tecnología de sellado DIAMOND™ Seal

Precio de lista: $21.60
Precio en línea: $17.28
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP60924

5.00 1
Image-Master-RP51480

Leland®

Leland® Conjunto de rociador - Extensible (cocina)

Precio de lista: $102.90 - $247.40
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP51480

Image-RP60911

Delta®

Delta® Abrazadera para manguera de conexión rápida

Precio de lista: $15.80
Precio en línea: $12.64
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP60911

2.64 11
Image-RP13938

Delta®

Delta® Junta tórica

Precio de lista: $6.90
Precio en línea: $5.52
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar

RP13938

4.50 2
RESEÑAS
Rated 5 out of 5 by from Great faucet! This faucet looks great and is high quality. Our plumber thought it was a great choice!
Date published: 2024-10-28
Rated 2 out of 5 by from Started dripping within months Had a plumber purchase and install this faucet. It was ok for a few months and then started dripping. After reading some of these reviews I’m thinking I need to replace the cartridge, but I kept thinking it was too soon. I should still be under warranty but the plumber disposed of the packaging. Is there anywhere else to find this information?
Date published: 2024-06-26
Rated 5 out of 5 by from Delta 9678-DST Well built, look's great, and nice finish.
Date published: 2024-06-24
Rated 3 out of 5 by from Looks great ….not happy with the diamond cartridge I've hd this installed when i had a granite top installed about 5 years ago still looks great. Not very pleased with the “diamond cartridge” i had to replace it twice, this time will be #3 . The first time it leaked into,the sink, the second time under the sink and onto the floor which had to be replaced…..in their defense they did send me a replacement cartridge free of charge. Now it is leaking again. Not sure what to do this time.
Date published: 2024-04-26
Rated 1 out of 5 by from A startling decline in quality My previous Leland lasted from 2008 until August of 2021 when the aerator began to deteriorate. Because at some point they changed the design of the Leland, I wound up having to get an entirely new faucet which Delta provided under warranty. I had to get this installed at considerable expense, and exactly 1 year later (08/22) I had to have them send me a new cartridge under warranty because it wouldn't close completely and it leaked. It is now 3/1/24 and it's leaking again, and will need its third cartridge in 3 years. Keep in mind my original made it 12 years on one cartridge. Furthermore, the old Leland used a mechanical clip to retain the sprayer head, but the new one uses a magnet. That magnet failed almost immediately and now the sprayer head just hangs. Overall I am incredibly disappointed in the nosedive in quality that Delta has apparently taken. This is also a $650 faucet, not the $59 Lowe's builder special, which makes this dismal quality all that more unacceptable. Do better, Delta.
Date published: 2024-03-02
Rated 1 out of 5 by from 2nd one and also JUNK!!! The second Leland and it's JUNK just like the first oneIt is very difficult to get this faucet in the exact position where it doesn't drip. There are many reviews saying the same, and I am frankly baffled that there are so many 5 star reviews as well. Delta's response is to engage in a lengthy process to flush out the hot and cold lines. I had this faucet for about 9 months and finally threw it out. The faucet I replaced it with requires no such flushing and easily turns off without drips. In my opinion this faucet design is defective and should not be sold.  Bought the 9178 DST it has very little water flow from it . All water lines were flushed. I would never recommend this faucet to anyone. e to hire my plumber to replace. To date, I will have spent too much time and effort phoning Delta and almost as much on my plumber as I have these faucets. Although I love the look, I can't afford to use Delta products ever again. So disappointed.
Date published: 2024-01-30
Rated 5 out of 5 by from solid faucet no complaints good pressure and temp select, install was easy with included wrench. magnet failed within 6mos, but delta sent replacement magnets and it's been 3yrs no issues. cleaned out both screens once a year (not hard water) had some problems with dripping bit tightened up the bolt behind sprayer and not an issue. can't take apart sprayer head with wrench...way too hard as there's a slight leak from bottom (separate from the stream or sprayer) and I bet a clean out would help, but it's stuck and included wrench with teeth cams out before i can loosen it...very minor beef after 3 yeara. LOVE THAT LASER STREAM!
Date published: 2024-01-22
Rated 5 out of 5 by from LOVE THIS FAUCET 😍 We've only ever purchased faucets from Amazon and box stores like home depot, only to have them fall apart within a year, at the most. This time, at the suggestion of friends who are contractors, we purchased our delta faucet from a local contractors warehouse. It was considerably more than the diy home improvement boxstores for the seemingly same product. But the quality of the overall weight, metal and other components is far superior and worth the price. Apparently manufacturers use a different grade of metals for faucets sold through an actual contractor's store versus the box stores even though on the surface they look the same. I have to say, even though I balked at this initially, and cringed at the price difference for what looked to be the same item, there's absolutely no comparison. I'll never go back to Amazon or the box stores for another faucet again. We had purchased the Delta Leland model #9178ARDST, Clos to 3 years ago and I absolutely love it and have not had a single problem with it falling apart or any other mechanical issues
Date published: 2024-01-08
  • y_2024, m_11, d_21, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_461
  • loc_en_US, sid_9678-SP-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

How to remove the sprayer head? 

Asked by: Richard
Hello Richard, Thank you for your question. The wand/sprayer assembly of the Delta Leland Pull-Down Kitchen 9178-DST faucet can be removed, simply by unscrewing it from the pull-out hose assembly. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

Has the problem with the plastic retainer for its extension hose been fixed for the Leland 9178-SP-DST

Asked by: Linda
Hello Linda, Thank you for your inquiry! There are no know issues with the spout retainer of the Delta Leland Pull-Down Kitchen 9178-SP-DST faucet model. We're always striving to make our faucets and products better and update our parts as needed. Please know that all of our products undergo rigorous tests to ensure long-lasting use and are made with high-grade materials. If you're having issues with your faucet, please contact us via email at customerservice@deltafaucet.com or you can also call the toll-free Delta Help Line at 1-800-345-3358 between the hours of 7:00 AM to 7:00 PM Monday ~ Friday as well as 8:00 AM to 5:00 PM Saturday CST. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Where is 9178-AR-DST manufactured?

Asked by: thearcher01
Thank you for your question, thearcher01! Model 9178-AR-DST and all of our faucets are manufactured in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA; and Panyu, China. As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

Small White Plastic Mushroom looking part in the Parts bag

Where does it go? Not covered in the assembly instructions that I can find. Thank you.
Asked by: ls_5chevelle
Hi ls_5chevelle, Thank you for your question! This is the RP40530 hose guide. It is used to assist in the installation of the hose to keep it from catching. Simply insert it into the end of the hose, slide the hose through the faucet, then remove the guide. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-09-14

Faucet will not retract

Just installed this faucet but the sprayer will not retract without me physically putting it back in. Magnet is on the hose but isn't pulling sprayer head back up.
Asked by: eugenia512
Dear Eugenia512, Thank you for your question. The Hose assembly of the Delta Leland Kitchen Pull-Down 9178-DST faucet, is design as self retracting. You would need to push the wand back up towards the spout assembly. The faucet does have a MagnaTite docking wand/sprayer assembly. There is a magnet on the top side of the sprayer and another one inside the end of the spout, that locked together to hold the sprayer in place. Best regards, Tanya
Answered by: Tanya
Date published: 2016-10-18

Why is the water pressure so much lower with this new faucet and how can I fix that?

Asked by: Rick
Thank you for your question. Delta Faucet model # 978-SSSD-DST has a flow rate of 1.8 gpm at 60 psi. This is the flow rate that adheres to the regulations. We do not recommend trying to increase the water flow.
Answered by: Delta1
Date published: 2024-03-28

Could I purchase a soap dispenser to match my 978 DST Delta Kitchen sink faucet? If available what is the cost?

Asked by: Ben Gunnarson
Thank you for your question, Ben! We recommend the RP50813, RP50781, or RP47280 Soap Dispenser to best match the Leland collection. https://www.deltafaucet.com/kitchen/product/RP50813 https://www.deltafaucet.com/kitchen/product/RP50781 https://www.deltafaucet.com/kitchen/product/RP47280 Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Sometimes when I turn the faucet spout it makes a squeaking noise. Can it be lubricated ? How and with what? Delta 9178-DST

Asked by: John
Thank you for your question, John! We do no recommend lubricating any parts of a Delta faucet unless instructed to do so. The noise you are hearing may be caused by a damaged friction spacer, part number RP60923. For further assistance with this part, please contact us directly. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP60923 Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

This picture shows that it toggles to spray, so just making sure it does?

Asked by: Lorrie
Thank you for your question. Delta Faucet model # 9978-DST does switch from spray to stream.
Answered by: Delta1
Date published: 2024-03-28

What kind of metal are the spout, body, and flow/temperature control handle made of? Please be specific about what each one is made of. Thank you.

Asked by: BufordTJustice
HI, BufordTJustice! Thank you for your question. Our faucets are made of several materials, Unfortunately, I am unable to provide a specific breakdown for your faucet as that information is considered proprietary. But in general, our faucets may contain: Bronze Brass (36000, 260) (hub, handle, body, tube, fittings) Zinc (escutcheon, hub, handle) Stainless Steel (undercover plate, seat liner, set screw) Copper (tubing) PEX-C (puck and tubing) Silicone (gaskets) Synthetic rubber - EDPM, Santoprene (hoses) Vinyl (hoses) Nylon Plastics I am sorry the information you were looking for was not readily available for you. Please know that all of our products undergo rigorous tests to ensure long-lasting use and are made with high-grade materials. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

is the metal part below the sink brass or some other metal? I am very concerned about rust and other corrosian.

Asked by: caja
Thank you for your question, Caja! The threaded shank of the Delta Leland Pull-Down Kitchen 9178-AR-DST model is brass. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

What is the part number for the cartridge on this model faucet?

Asked by: Mike
Hi, Mike! Thank you for your question. The valve cartridge assembly for the Delta 978-SSSD-DST faucet is our Delta RP50587. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50587 Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Is the pull-down hose long enough for farm sink?

What is the length of the pull-down hose? Is the pull-down hose long enough to reach the bottom and all corners of a farm sink (Kohler Undermount Farm Sink, 9.625" D, 21.625" W, 32.6875" L)?
Asked by: didibaby
Hi didibaby, Thank you for your question. The hose is 54" in length and will provide approximately 22" of reach from the end of the spout. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-05-24

Does the RP53998 2.2gpm aerator fit this faucet?

An answer for the very similar 9178-RB-DST said "The model 9178-RB-DST comes with an aerator with a flow rate of 1.8 gpm. You can order RP53998 which is a 2.2 gpm aerator to raise the flow rate for this particular model." http://www.deltafaucet.com/kitchen/details/9178-rb-dst.html#/?tab=ask_answer Will the RP53998 aerator fit the 978-AR-DST ? Thanks!
Asked by: Ted
Hi Ted, Thank you for your question. The RP53998 aerator will fit the model 978-AR-DST faucet. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Using the sprayer

When using the sprayer is there any side splatter or does the spray pretty much stay confined to the nozzle direction?
Asked by: WayneP
Thank you for your question, Wayne. The water should stay within a narrow cone while in the spray setting. Please refer to the product photos to see an image of the spray pattern. The pull-down wand has TouchClean spray holes that allow you to easily wipe away any mineral buildup that can cause errant sprays. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-02-02

Salesperson mentioned a lower water pressure model and the 1.8 which was recommended.

I have very good water pressure. My concern is splashing in 2 bowl sink (7" deep or especially the small 5" deep. Should I purchase the lower pressure item. Will it last as well? Advice?
Asked by: Phyllis
Hi Phyllis, Thank you for your question. The model Water Efficient (1.5 gpm) version of this faucet is model number 978-WE-DST. Splashing should not be an issue in most instances. However, the 978-WE-DST has a lower water velocity, which helps prevent splashing. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

What is the spout height of the Leland Bar/prep faucet?

Asked by: Diane
Hi, Diane! Thank you for your question. The Delta 9678-AR-DST Bar/Prep Faucet does have a spout height of 14 1/2" (368 mm). Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Finish protection for arctic stainless

Is there any protective finish that can be used for the arctic stainless (Leland)? Wax or a synthetic coating?
Asked by: aclmark
Dear Aclmark, Thank you for your question. Delta does not recommend and advises that no polishes or coatings should be used on any of our finishes. The cleaning care directions from the warranty states: Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use. Avoid using the following which can damage your finish: Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents. Avoid harsh abrasives, coatings and/or polishes. Avoid bleach-based cleaners. Best regards, Tanya
Answered by: Tanya
Date published: 2016-10-10

Where is this product made?

Asked by: Myfavoritewacker
Thank you for your question. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made.
Answered by: Delta1
Date published: 2024-03-28

i bought the 978-rb-dst kitchen faucet that lists 2 hole 4". Does that mean the center of the holes should be 4" apart? Are both holes to be drilled at 1 3/8" size?

Asked by: Scottie
Thank you for your question, Scottie! The center of the holes on model 978-RB-DST, need to be no less than 4 inches apart. The hole sizes need to be between 1 5/16" - 1 1/2" inches. I have included a link to the Technical Specifications diagram for model 978-RB-DST, for you to refer to. https://media.deltafaucet.com/SpecSheet/dsp-k-978-dst_G.pdf Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

can I buy just the spray head for the Leland bronze faucet? Model 978-RB-DST

Asked by: Lenny
Hi, Lenny! Thank you for your question. The Delta 978-RB-DST faucet sprayer assembly is available for separate purchase. The part number is RP51480RB. Here is a link to this part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51480RB Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

The handle has a set screw and no longer stays tight. Believe threads in handle are stripped. Can I purchase a new handle?

Asked by: Stuart
Hello Stuart, Thank you for your question. Yes, the handle assembly of the Delta Leland Pull-Down Kitchen 9978-RB-DST faucet can be purchased as a separate part. The part number for the metal lever handle assembly is RP46748RB. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP46748RB Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Does this faucet come with the matching base plate? If not, can one be ordered separately?

Asked by: Cindy
Hi Cindy, Thank you for your question! This faucet does not include a base plate. We also do not have a plate available for this faucet. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

The specs say that this needs two four inch center holes. Can it be 5 inch centers?

When my granite was installed, the installers put my sprayer and the faucet at 5 inch centers. I really like this Leland faucet for my new faucet.
Asked by: CeeCee
Hi CeeCee, Thank you for your question. The 978-RB-DST can be installed on 5" centers. The spray hose will just not be able to extend as far as when installed a 4". Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

I don't see any markings to tell which supply line is hot and which is cold. I am installing a 9178-sp-dst. Is it just meant to install either way, or is there a right way and wrong way? Thanks

Asked by: Gary Leroy
Hi, Gary! Thank you for your question. There should be red and blue markings on the supply lines to show hot and cold connections on the Delta 9178-SP-DST Faucet. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Will this faucet fit into a sink with a 1 1/4 inch hole?

Asked by: phil52849
Hi, Phil52849! Thank you for your question. The Delta 9178-AR-DST Faucet does require a minimum hole size of 1 3/8" (35 mm). Here is a link to the technical specifications sheet for further measurements for the faucet: https://media.deltafaucet.com/SpecSheet/dsp-k-19978-sd-dst_D.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

I am concerned with flow rate on this faucet. I have found conflicting info on the flow rate. Some sites say 1.8 GPM while others say 2.2 GPM. I want

I want a faucet with at least 2.2GPM or higher.
Asked by: Carly
Hi Carly, Thank you for your question. The model 9178-RB-DST comes with an aerator with a flow rate of 1.8 gpm. You can order RP53998 which is a 2.2 gpm aerator to raise the flow rate for this particular model. None of our pull down faucets come with a flow rate of 2.2 gpm. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Faucet head sold separately?

I own this model, and after years of use, the faucet head needs to be replaced. Can I purchase a faucet head separately?
Asked by: LMD1
Hi, Lisa! Thank you for your question. The sprayer assembly is available separately. The sprayer assembly is RP51480AR. here is a link to the sprayer: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51480AR Best Regards, Rosanna
Answered by: Rosanna
Date published: 2024-03-28

How do you work the rubber touch clean

Water is flowing slower. Faucet installed by builder
Asked by: Mike
Hi, Mike! Thank you for your question. The rubber nubs can be cleaned by running your finger over the face of the sprayer. If you need to clean the sprayer because of low flow, you can take a solution of 50% white vinegar and 50% water solution and soak the whole sprayer in the solution for an hour or even overnight to clean. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2021-01-24

I installed this unit in our kitchen about three months ago and it now has no flow of water through it - any suggestions to resolve the problem?

Asked by: Jim McLean
Thank you for your question, Jim! I'm sorry to hear you are experiencing a decreased flow and we are happy to help. We would recommend removing the wand to check for debris as well as performing a flush of the faucet. I have emailed you directly about flushing your model. Please refer to that email for further assistance if checking the wand does not help with the flow. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2024, m_11, d_21, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_6, bvpage2n
  • co_hasquestionsanswers, tq_518
  • loc_en_US, sid_9678-SP-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 51ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.