Llave para baño independiente de dos manijas en Venetian Bronze

Dear R.T., Thank you for your inquiry! The spout and handle bases of the Delta Vero Lavatory 3553LF faucet are 2" (51 mm). https://media.deltafaucet.com/SpecSheet/DSP-L-3553LF%20Rev%20E.pdf Best regards, Tanya

Hi, Stefano. Thank you for your question. The stream straightener for the Delta 3553LF faucet simply pushes straight up into the mouth of the spout to install. Best Regards, Rosanna

Thank you for your question, embiidphila! The placement of the handles will rely on the valve orientation. If the base of the handle is not appropriately placed then the lever will also stop short of center. Please refer to diagram A and B in section 1 of the maintenance and installation manual for instructions. For further assistance, please contact our customer service team directly at 1-800-345-3358 Monday-Friday: 8a.m.-8p.m. EST and Saturday: 9a.m.-6p.m. EST or via email at customerservice@deltafaucet.com. https://media.deltafaucet.com/MandI/86410%20Rev%20C.pdf Best regards, Edward

Hi Dmoench, Thank you for your question. Please refer to diagram B in section 1 of the instructions. Please make sure that the top glide ring (5) is installed with the flat side face up. Please also be sure to press the handle (6) down until it is flush with the handle base (7). Please also make sure that the top retainer (8) is threaded all the way down onto the valve. You may need to loosen the mounting nut to thread the retainer. Installation Instructions: http://www.deltafaucet.com/customersupport/documentation/3553lf.html?document=mi&documentIndex=0#flashWrapper Best regards, Jon

Hi Everett, Thank you for your question. Based on the "Maintenance" section of the below Maintenance/Installation document link, page 4. It states that you can pull out the stream straightener out of the end of the spout, with a long nose plier. This tool would not come in the box with the faucet. https://media.deltafaucet.com/MandI/86410%20Rev%20C.pdf Best regards, Tanya

Dear JM, Thank you for your inquiry! Yes, the 2 5/8" is the correct distance from the end of the spout to the counter-top/sink, for the Delta Vero Lavatory 3553LF faucet. Best regards, Tanya

Dear Dee, Thank you for your question. The Delta Vero Lavatory 3553LF faucet had a flow rate of 1.5 gpm at 60 PSI in 2012. To comply with all states current plumbing codes and restrictions the flow rate of this Vero faucet converted to 1.2 gpm at 60PSI, starting July 1, 2016. Best regards, Tanya

Hi, Thank you for contacting us. We apologize for any inconvenience. We are more than happy to help you. Please try using a 50/50 white vinegar and water solution. It can be used as a cleaner, then rinse and wipe with a soft cloth. This will help dissolve mineral buildup. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany

Hi Jays, Thank you for your question! The 3553LF-CZ lavatory faucet only releases 1.2gpm ( gallons per minute) which would not be enough water to fill a tub in good timing. Best regards, Brandis

HI, CROCHE! Thank you for your question. The Delta 3553LF-CZ Faucet is able to be sent to California as this has a flow rate of 1.20 gpm @ 60 psi. Best Regards, Rosanna

Hi, Danny! Thank you for your question. Unfortunately, the RP10612 Extension kit will not fit the Delta 3553LF faucet. We do apologize for any inconvenience this may cause. Best Regards, Rosanna

Thank you for your question. The spout on Delta Faucet model #3553LF has a height of 6 3/8 inches. Included is a link to the spec sheet for visual assistance. http://www.deltafaucet.com/customersupport/documentation/3553lf.html?document=ts&documentIndex=0#flashWrapper

Hi, Velda! Thank you for your question. Cleaning and care techniques can be found here: https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-clean-a-faucet Best Regards, Rosanna

Hi, Foxden! Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta faucet. The hole size for each hole should be 1 5/16"~1 1/2" (33~38 mm). Here is a link to the technical specifications for this unit: https://media.deltafaucet.com/SpecSheet/DSP-L-3553LF%20Rev%20E.pdf Unfortunately, there is not a repair part to fix the hole being larger than the required hole size. I do apologize for any inconvenience this may cause. Best Regards, Rosanna

Hi Laura, Thank you for your question! This model has a push pop-up drain assembly. Simply press the stopper to close or open the drain. Best regards, Jon

Hi, Whitten5! Thank you for your question. The Delta 3553LF faucet aerator does not increase or decrease the water flow. The aerator aerates the water to flow in a smooth ribbon. Best Regards, Rosanna

Thank you for your question, richard! The part number for the pop up drain, that is included with model 3553LF-CZ is 33W576CZ. If you need further assistance, feel free to contact us directly. Best Regards, Benjamin

I purchased this product not realizing the specs stated it was ok for up to 29mm (just under 3cm for standard granite thickness). The faucet was installed in a granite vanity and after getting the handles pushed down all the way, it is working fine. I am not sure why Delta states it won't work.

Hello Greg5200, Thank you for your question. The handle and spout bases of the Delta Vero Lavatory 3553LF faucet are not sold as separate parts. However, the handle bases are included with the handle kits RP63349 (hot) and RP63350 (cold). https://media.deltafaucet.com/PartsDiagram/DPD-L-3553LF_A.pdf Best regards, Tanya

Hi frandrupl, We are sorry that you are experiencing a problem with your faucet. Unfortunately the design of the spout on the model 3553LF does not allow for an aerator or aerated stream. Lowering the water flow is the only way to reduce the splashing. Thanks, Dave

Hi, Sallie! Thank you for your question. The Delta 3553LF Faucet in the Chrome finish will be a shiny, reflective finish. Best Regards, Rosanna

Hi, Dcware! Thank you for your question. There is not a way to increase the flow rate for the Delta 3553LF-SS Faucet. This faucet has a flow rate of 1.20 gpm @ 60 psi. The unit is Water-Efficient and WaterSense® Labeled. WaterSense® labeled faucets use at least 20% less water than the industry standard—saving you money without compromising performance. If you feel like you are getting less than 1.20 gpm, please let us know and we will be happy to help you. Best regards, Rosanna Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Thank you for your inquiry, Phil W! We recommend a minimum of 2 1/2" (64mm) to the back splash, for the installation of the Delta Olmsted Lavatory 3553LF faucet. Cleaning the faucet may be difficult, if the faucet is installed at a lesser distance to the back splash. Best regards, Tanya

Dear Joe S, Thank you for your question. There are overflow holes in the flange assembly of the Metal Pop-Up Drain assembly 33W576, that comes with your Delta Vero Lavatory 3553LF faucet. The drain assembly will work with your sink installation. Best regards, Tanya

Hi mbgangl, Thank you for your question. The copper supply tube for the spout of the Delta Vero Lavatory 3553LF faucet is designed to move for an easier installation. Best regards, Tanya

Hello Rayr, Thank you for your inquiry! The Delta Vero Lavatory 3553LF faucet can be used on any standard under-mount or top mount sink installation. We do not manufacture or recommended any certain type of sinks or counter-tops, for our faucet installations. Best regards, Tanya

Hello boilers89! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. We do not have plans currently to make the Delta Faucet Vero® Two Handle Widespread Bathroom Faucet In Venetian Bronze MODEL#: 3553LF-RB in Matte Black. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Hi Shelby, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. If the faucet exhibits very low flow remove and clean the flow restrictor. There is no way to increase the flow rate for the Delta Faucet Vero® Two Handle Widespread Bathroom Faucet In Venetian Bronze MODEL#: 3553LF-RB. This faucet has a flow rate of 1.20 GPM @ 60 psi. The unit is Water-Efficient and WaterSense® Labeled. WaterSense® labeled faucets use at least 20% less water than the industry standard—saving you money without compromising performance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Kelley

Hello Jerry, Thank you for your question! We apologize for the inconvenience you are experiencing and will be happy to help you. We're proud that most of our Delta Faucet products are manufactured at our plants in Jackson TN, Morgantown KY, Lapeer MI, and Greensburg, IN. The location information on the back of the box will tell you where each specific model was made. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi cory, Thank you for your question about the Delta Faucet model 3553LF-RB. Recommended maintenance would be to replace the RP4993 seats and springs below the stem unit. The rubber seat can be damaged or worn over time. To remove the handle, first loosen the set screw with a 3/32" hex wrench, remove the handle from the stem extender, then remove the handle base. With the water supplies turned off, unscrew the bonnet nut to access the stem. See the faucet manual for more information: https://media.deltafaucet.com/MandI/86410%20Rev%20D.pdf Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist