Accesorio de válvula únicamente Monitor® serie 17 en Champagne Bronze

Hi, jmo6259! Thank you for your question. The Delta Monitor T17038 Trim Kit will fit the Delta 1500 Series Valve if the original escutcheon plate has the screw holes at the 1 & 7 o'clock position. The new cartridge, RP46463, that is included with the Monitor T17038 Trim Kit, will not fit the 1500 Series Valve. The original cartridge, RP32104, will need to be used. Please feel free to call, email, or message us on social if further assistance is needed. Best regards, Rosanna Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Hi, Larry! Thank you for your question. We do not make a trim kit with a non-diverter tub spout to match this Delta Lahara Monitor T17038 Valve Trim Kit, however, this trim kit will work as a tub only installation. Best Regards, Rosanna

Hi Dy, Thank you for your question. This trim can be used with the R10000-UNWSHF rough-in for a shower only installation. Best regards, Jon

Thank you for your question. Delta Faucet model # T17038-SS is a valve only model and the R10000-UNBX will work for it. We do offer a shower only model that includes the shower head. It is Delta Faucet model # T17238-SS.

Hi Diane, Thank you for your question. The T11800-SS is the matching diverter trim to the model T17038-SS valve only trim. Both trims are our (SS) brilliance stainless finish. Thanks, Dave

Thank you for your question! Yes, the trim will include the necessary cartridge and seals for a MultiChoice R10000 valve. If you are using an pre-2006 1700 Series valve, you will need to use the original cartridge or a new RP32104 Cartridge & Seals. Best regards, Jon

Thank you for your question. Delta Faucet model # 17094 and 17038 function exactly the same. The only difference is the style of the series looks different between the two models.

Hello Daryl, Thank you for your question. Yes, as long as the screw holes on your original large round escutcheon plate are at the 1 and 7 o'clock positions and you do not have a push button shower diverter directly below the off and on handle, then the Delta Lahara Valve Trim T17038 or any of the Delta valve trim kits that start with a T17, except for the T17T series trim kits will interchange for you. The cartridges (RP46463, gray top cap) that come with the new trim kits will not fit your valve body, so you will need to reuse your existing cartridge (RP32104, white top cap). Best regards, Tanya

Hello, Thank you for your question! Please see the following link for more information on how to allow more hot water into the mix. https://www.youtube.com/watch?v=oTGxt9GXsvs Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Thank you for your inquiry, Ik04! Yes, the valve and trim parts are compatible and will work with the Delta Lahara Valve Trim T17038-SS. Best regards, Tanya

Hi mmc115, Thank you for your question. In a shower only application we would recommend using the R10000-UNBXHF rough to go with your T17038-SS trim. To operate the showerheads individually or at the same time you will need the R11000 diverter rough and the 3 setting matching Lahara trim T11800-SS. Thanks, Dave

Hi rf, Thank you for your question. All of our 17 series units have a non-metallic temperature knob. Best regards, Jon

Hi Tipper, Thank you for your question. The High Flow (HF) valves are designed for shower-only applications. With a tub-only application, we would recommend the R10000-UNBX or the R10000-UNWS. The With Stops (WS) versions have integrated stops that allow you to shut off the water at the valve for installation or repairs. Thanks, Jon

Hi wvgranlw, Thank you for your question. Using another brand of shower head will not affect the performance of our R10000 multichoice universal valve. Thanks, Dave

Good afternoon Norman! Thank you for contacting Delta Faucet Company. We are sorry that you are having a concern with your faucet and will be happy to help you. Reduced flow is typically caused by debris. If only one side is affected, there is debris in the supply line. To flush the supply line, first shut off the hot and cold water supply. Remove the hot supply line from the shut off valve and place the line into a bucket. Open the handle to the middle position, fully open, then turn the cold supply back on for one minute. The cold water should flow through the faucet and out the hot supply tube. Reconnect the supply line and turn on both supplies. Check flow from the faucet. If this does not help, please let us know. We appreciate your business and look forward to continuing to serve you! Please contact us back if you have any questions or need further assistance. Best Regards! Frank CSR Agent

Hello, Bonnie! Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Yes, our Delta Faucet model 58680-CZ25 HydroRain® H2Okinetic® 5-Setting Two-In-One Shower Head In Champagne Bronze will work with the T10738-CZ Lahara® Monitor® 17 Series Valve Only Trim In Champagne Bronze trim kit. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hi ckbath, thank you for contacting Delta Faucet Company! Our 17 series showers have 2 handles. The large handle is for volume, the smaller handle is for temperature. Rotate the temperature knob clockwise for cooler water, and rotate counterclockwise for hotter water. Please reach out with further questions! Best Regards, Kyra Digital Communications Specialist

Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! This uses our R10000-UNBX rough. Please reach out with further questions. Best Regards, Kayla

Hello Valued Customer, Thank you for reaching out to Delta Faucet Company! Yes, our parts can be purchased separately. Please note that these parts are for a 1700 series and these parts might fit a 1500 series valve depending on the manufacturing date of the valve. Please also note that the parts listed below are for the Chrome finish. Escutcheon - RP28795 Screws - RP196 (RP12630 for longer screws) Volume handle - RP51306 Temperature handle RP51307 https://www.deltafaucet.com/where-to-buy We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Craig, Thanks so much for contacting Delta Faucet Company about, T17038! I am sorry for any confusion, if the 1500 series is upgraded using the RP29405 renovation kit it would include the bonnet nut. However, with the T17038 trim kit, the RP22734 bonnet nut would need to be purchased for the product to fit properly. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! Our 1700 series valves will rotate from 5 o'clock up to about 1 o'clock for full flow. The small dial is for the temperature adjustment. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Joe M, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. I have included the link to our Delta Faucet Lahara® Monitor® 17 Series Valve Only Trim In Chrome MODEL#: T17038 parts diagram, this will show the volume control and temperature control handle. I am also including a link to the where to buy section on our website. https://media.deltafaucet.com/PartsDiagram/DPD-B-T17038_A.pdf https://www.deltafaucet.com/where-to-buy Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Shaun, Thank you for your question regarding our Delta Faucet Delta Lahara® Monitor® 17 Series Valve Only Trim In Chrome MODEL#: T17038. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The pre 2006 cartridge is white and after 2006 cartridge would be grey. I have attached the links to both parts below. https://www.deltafaucet.com/parts/product/RP32104.html https://www.deltafaucet.com/parts/product/RP46463.html Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist

Hi Thomas, thank you for your interest in the T17038! To remove it, you will need to push in on the back of the handle blade. This will pop the dial off. You can also use a flathead screwdriver to pry it off. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Thank you for your question, Laurie! Model T17038-SS can be used with any Delta rough in valve in the R10000 line. https://www.deltafaucet.com/search-results?title=r10000&type=Delta_Products Best Regards, Benjamin

Hi Bob h, Thanks so much for contacting Delta Faucet Company! Yes, please see the following link for a How-To video on adjusting the rotational limit stop to allow more hot water into the mix. https://www.youtube.com/watch?v=oTGxt9GXsvs Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Jeff, Thank you so much for contacting Delta Faucet Company! We apologize for the issue you are experiencing and we are more than happy to assist you. We will need more information to better assist you. Please send us an email at customerservice@deltafaucet.com. Best Regards, Skyler

Good afternoon Julie! Thank you for your question! I am happy to help you. The T17038 shower assembly will be compatible with your BT13010-SS Trim kit as long as the BT13030 trim kit was installed after 2006. Please contact us back for any further questions. Best Regards, Frank

Hello Alex! Thanks for the question. The temperature handle is just snapped on. To remove it, firmly pry off. For further assistance, please contact us directly. Best regards, Paul

Hello Bob46268! Thank you for your inquiry! We do see here that you had success with just puling straight out to remove the handle cap. With any further questions or concerns, please do not hesitate to reach out to us directly! Best Regards, Carrie