Accesorios de ducha Monitor® serie 17 en cromado

Hello JJ Todapackers, Thank you for your question! I am happy to help you! Our Delta T17264 does not have a set screw cover however, we recommend using a small amount of clear silicon will help to prevent water from getting inside and corroding the set screw. Please contact us back for any further questions. Best Regards, Nicole

Hello Chris, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available for our Delta Faucet Ashlyn® Monitor® 17 Series Shower Trim, model T17264; however, I am happy to assist you! If this unit is having a leaking issue, we first would recommend a flush, If the flush does not work we then would ask to replace the RP46073 Cartridge Adapter. Lastly, if that does not fix the issue, then we would recommend replacing the whole cartridge, RP46074. Please see the parts diagram link below, as well as the flushing instructions. https://media.deltafaucet.com/PartsDiagram/DPD-B-T17064%20Rev%20B.pdf To flush the open valve without the cartridge, please follow the directions below. 1) Remove the handle by loosening the set screw on the side of the base of the handle. The set screw is either a 1/8" or 3/32" Allen screw. So you will need to use the appropriate size Allen wrench to loosen it. Loosen it just enough to be able to easily pull the handle off. * Note. If there is calcium build-up at the base of the handle, it may be necessary to soak it in a 50/50 solution of vinegar and water. Simply saturate the rag with the 50/50 solution, wrap it around the handle base and place a plastic bag over it. I would recommend do this the night before removing the handle. You will also need a Phillips screwdriver to remove the screw under the temperature knob. 2) After removing the handle, remove the trim sleeve. 3) Then you will need to remove the bonnet nut. The bonnet nut is the threaded ring at the valve opening. It unscrews counterclockwise. You will need a pipe wrench or a pair of channel locks. 4) After removing the bonnet nut, you will need to pull the cartridge straight out. You may need a small, skinny bladed screwdriver to wedge in between the lip of the cartridge and the valve to help start it out. 5) Once the cartridge is removed, you will have an open valve body. 6) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out, much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let it flush for 30 seconds. 7) Re-install the cartridge and re-assemble in reverse of how it was disassembled. The Tub/Shower should then have a good flow. If it does not, the cartridge will need to be replaced. Thank you for being a loyal Delta Faucet customer. Please feel free to contact us back with any further questions. Best Regards, Emma

Hi Chad, Thank you for your question! Yes, you can install a 14 series trim kit and use the included cartridge. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Sandra, Thank you for your question about the Delta Faucet model T17264 Ashlyn® Monitor® 17 Series Shower Trim. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! Always blot dry any water from the faucet surface. Allowing water to evaporate on the surface can lead to a build-up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. See here for more information: https://support.deltafaucet.com/s/article/How-should-I-clean-or-maintain-the-finish-on-my-faucet-1628028364995 Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hello Customer! Thank you for your question and we are happy to help. The Delta T17264 rotational limit stop may need to be adjusted or it may need repair parts like the seats and springs. Please contact us directly for further assistance. Best Regards, Carrie

Hi tonya4321, Thank you for your question about the Delta Faucet model T17264. Yes, the included shower head can be replaced with a model 52664-BL or other Delta shower heads. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

HeHello ak104 , Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Ashlyn® Monitor® 17 Series Shower Trim In Chrome MODEL#: T17264 hs no set measurement for the showerhead to the valve. Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if there is anything else you need. Best Regards, Themar Customer Service Representative

Hi Barb! Thank you for your question and we are happy to help. We are sorry to hear about your experience. You may need repair parts. Please contact us directly via a phone call or send us an email for further assistance. Best Regards, Carrie

Hi JDevils485, thanks for your question regarding T17264-BL! Yes, RP77162BL is available. Please feel free to contact us directly if you have any questions or need additional assistance. https://media.deltafaucet.com/PartsDiagram/DPD-B-T17064%20Rev%20B.pdf Best Regards, Emma Digital Communications Specialist

Hi Lkd1, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. The Delta Faucet model T17264-BL Monitor® 17 Series Shower Trim In Matte Black showerhead can be mounted from a ceiling mounted shower arm with a 1/2" male threaded connection. Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Skyler

Hello Water, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet ASHLYN® Monitor® 17 Series Shower Trim MODEL#: T17264-BL flow rate is 1.75 GPM @ 80 PSI from the showerhead and the tub spout flow rate is 6.2 GPM @ 60 PSI with R10000-UNBX. Please see the technical specification link below. https://media.deltafaucet.com/SpecSheet/DSP-B-T17064%20Rev%20H.pdf Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole

Hi atm91, Thanks for your question regarding T17264-BL! Yes, the RP32104 would fit the new trim kit. The RP22734 bonnet nut may need to be updated to allow for the new trim to fit properly. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello FSinTN, Thank you for contacting us, I would be happy to help you. Our R10000-UNWSHF is a universal valve, Which mean any of our T13/14, T17 or 17T trim kit and cartridge can be used. If you want to update to the Thermostatic cartridge you will need to update the trim, due to the cartridge is larger and you would need the larger handles to go with it. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hello Anya, Thank you for your question, I would be happy to help you. Our faucets are not recommend for outdoor use due to possible void of warranty if non manufactures defect occurs. Please contact us back for any further questions or concerns. Best Regards, Nicole

Hello Donnie, Thank you for your question about the Delta Faucet model T17264-SS ASHLYN® Monitor® 17 Series Shower Trim. I apologize for any difficulty finding this information. We are happy to help! To remove the temperature knob, disengage the rear snap on the temperature control cover and then unhook the front of the cover from the knob. See the manual for more information: https://media.deltafaucet.com/MandI/107529%20Rev%20D.pdf Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hello Barb, Thank you for contacting us. We apologize that the install instructions were missing from your Delta Faucet model T17264-BL Monitor® 17 Series Shower Trim and I am happy to help you. We thank you for being a loyal Delta Faucet customer. Please refer to the below installation guide for assistance in properly installing your product. https://media.deltafaucet.com/MandI/107529%20Rev%20D.pdf Please contact us back directly via email with any further questions. Best Regards, Skyler

Hello, Dave! Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. This Delta Faucet model T17264-BL Ashlyn® Monitor® 17 Series Shower Trim In Matte Black will utilize model R10000-UNWS MultiChoice® Universal Tub / Shower Rough - Universal Inlets / Outlets. Please see the following link for more information. https://www.deltafaucet.com/bathroom/product/R10000-UNWS.html Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim